Lexmark X9350 User Manual

hPress  or  repeatedly until  On appears.
i Press 
 to save and exit.
4 If you want to print a list of blocked faxes:
a From the control panel, press 
 or  repeatedly until  Fax is highlighted.
b Press 
.
c Press 
 or  repeatedly until the  Fax Setup submenu is highlighted.
d Press 
.
e Press 
 or  repeatedly until the  Fax Blocking submenu is highlighted.
f Press 
.
g Press 
 or  repeatedly until you reach  Print Blocked Fax List .
h Press 
 to print the list.
Note:  This feature is only available when...

Maintaining the printer
Changing print cartridges
Removing a used print cartridge 1 Make sure the printer is on.
2 Lift the scanner unit.
The print cartridge carrier moves and stops at the loading position, unless the printer is busy.
3 Press down on the cartridge carrier latch to raise the cartridge carrier lid.
4Remove the used print cartridge.
Note:  If you are removing both cartridges, repeat step 3 and step 4 for the second cartridge.
Installing print cartridges 1 If you are installing new print...

Warning: Do not touch the gold contact area on the back or the metal nozzles on the bottom of the cartridges.
2 Lift the scanner unit.
3 Press down on the cartridge carrier latches to raise the cartridge carrier lids.
4Insert the black cartridge or photo cartridge in the left carrier. Insert the color cartridge in the right carrier.
5Close the lids.
 143
Downloaded From ManualsPrinter.com Manuals12
12     

6Close the scanner unit, making sure to keep your hands out from underneath the scanner unit.
The control panel display will prompt you to load paper and press  to print an alignment page.
Note:  The scanner unit must be closed to start a new scan, print, copy, or fax job.
Achieving better print quality
Improving print quality
If you are not satisfied with the print quality of a document, make sure you: • Use the appropriate paper for the document. If you are printing photos or other high quality images,...

4Press  or  repeatedly until  Align Cartridges  is highlighted.
5 Press 
.
An alignment page prints.
If you aligned the cartridges to improve print quality, print your document again. If print quality has not improved, clean
the print cartridge nozzles.
Cleaning the print cartridge nozzles 1 Load plain paper.
2 Press 
 or  repeatedly until  Maintenance is highlighted.
3 Press 
.
4 Press 
 or  repeatedly until  Clean Cartridges  is highlighted.
5 Press 
.
A page prints, forcing ink through the print...

4Using another clean section of the cloth, gently hold the cloth against the contacts for about three seconds, and
then wipe in the direction shown.
5 With another clean section of the cloth, repeat step 3 and step 4.
6 Let the nozzles and contacts dry completely.
7 Reinsert the print cartridges.
8 Print the document again.
9 If the print quality does not improve, clean the print nozzles. For more information, see  “Cleaning the print cartridge
nozzles” on page 145.
10 Repeat step 9 up to two more...

Cleaning the scanner glass1 Dampen a clean, lint-free cloth with water.
2 Gently wipe the scanner glass clean.
Note:  Make sure all ink or corrective fluid on a document is dry before placing the document on the scanner glass.
Ordering supplies
To order supplies or to locate a dealer near you, visit our Web site at  www.lexmark.com.
Notes: • For best results, use only Lexmark print cartridges.
• For best results when printing photos or other high-quality images, use Lexmark PerfectFinish Photo Paper or...

5Lift the printer off of the Tray 2 base, and set the printer aside.
Using genuine Lexmark print cartridges
Lexmark printers, print cartridges, and photo paper are designed to perform together for superior print quality.
If you receive an  Out of Original Lexmark Ink  message, the original Lexmark ink in the indicated cartridge(s)
has been depleted.
If you believe you purchased a new, genuine Lexmark print cartridge, but the  Out of Original Lexmark Ink
message appears:
1 Click  Learn More  on the...

Troubleshooting
•“Setup troubleshooting” on page 149
• “Print troubleshooting” on page 153
• “Copy troubleshooting” on page 158
• “Scan troubleshooting” on page 160
• “Fax troubleshooting” on page 162
• “Jams and misfeeds troubleshooting” on page 166
• “Memory card troubleshooting” on page 174
• “Error messages” on page 175
• “Resetting factory default settings” on page 185
• “Removing and reinstalling the software” on page 185
Setup troubleshooting • “Incorrect language appears on the display” on page...

Selecting a different language after
initial setup1 Press  to turn the printer off.
2 Press 
 once, and then immediately press and hold and .
The 
 light blinks as the printer comes on. The  Initial Setup menu
appears.
3 Release the buttons.
4 Press 
 or  repeatedly until the language you want appears on the
display.
5 Press 
 or repeatedly until the option for  Country is highlighted.
6 Press 
 or  repeatedly until the your country or region appears on the
display.
7 Press 
 or  repeatedly until  Set...