Lexmark X9350 User Manual

Error messageSolutionFailed to ConnectResend the fax. There may have been a problem with the quality of the
telephone line connection.Place a test call to the telephone number to which you want to send a
fax to make sure that it is working correctly.If the telephone line is being used by another device, wait until the other
device is finished before sending the fax.Make sure that the printer is detecting a dial tone.
• For more information, see  “Sending a fax while listening to a call (On
Hook Dial)” on...

Error messageSolutionNo AnswerResend the fax. There may have been a problem with the quality of the
telephone line connection.Place a test call to the telephone number to which you want to send a
fax to make sure that it is working correctly.Make sure that the printer is detecting a dial tone.
• For more information, see  “Sending a fax while listening to a call (On
Hook Dial)” on page 129.
• Check the Dial Method setting.
1 Listen for a dial tone. If you hear a dial tone, but the printer hangs
up...

Error messageSolutionPhone Line BusyThe printer automatically redials three times at 2-minute intervals. You
can change the default settings to redial up to five times at intervals of
up to 8 minutes.
To change the redial settings:
1 From the control panel, press 
 or  repeatedly until  Fax is
highlighted.
2 Press 
.
The  Fax Mode  menu appears.
3 Press 
 or  repeatedly until  Fax Setup is highlighted.
4 Press 
.
5 Press 
 or  repeatedly until  Dialing and Sending  is
highlighted.
6 Press 
.
7 To change...

Error messageSolutionRemote Fax ErrorResend the fax. There may have been a problem with the quality of the
telephone line connection.Lower the transmission speed of your outgoing fax:
1 From the control panel, press 
 or  repeatedly until  Fax is
highlighted.
2 Press 
.
3 Press 
 or  repeatedly until  Fax Setup is highlighted.
4 Press 
.
5 Press 
 or  repeatedly until  Dialing and Sending  is
highlighted.
6 Press 
.
7 Press 
 or  repeatedly until  Max Send Speed  is highlighted.
8 Press 
 or  until a...

Error messageSolutionUnsupported Paper SizeThe fax machine of the recipient does not support the size of the
document you want to fax. Consider changing the size of your document,
and then resending your fax.
To resize hard-copy documents:
1 From the control panel, press 
 or  repeatedly until  Copy is
highlighted.
2 Press 
.
3 Press 
 or  repeatedly until  Reduce/Enlarge  is highlighted.
4 Press 
 or  repeatedly until the resizing option you want appears.
5 Press 
.
6 Press 
.
Resetting factory default...

Notices
Product name:
Lexmark 9300 Series
Machine type:
4422
Model(s):
001
J01
E01
A01
Edition notice
September 2006
The following paragraph does not apply to any country where such provisions are inconsistent with local law:  LEXMARK
INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. Some states do not allow disclaimer of express or...

Warning: A Warning  identifies something that could damage your product hardware or software.CAUTION:  A CAUTION  identifies something that could cause you harm.CAUTION:  This type of  CAUTION indicates that you should  not touch the marked area.CAUTION:  This type of  CAUTION indicates a  hot surface.CAUTION:  This type of  CAUTION indicates a  shock hazard .CAUTION: This type of  CAUTION indicates a  tipping hazard .
Federal Communications Commission (FCC) compliance information statement
This product...

To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide
maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.
The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF fields in excess of
Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada's Web site...

ΕλληνικήΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Η LEXMARK INTERNATIONAL, INC. ΔΗΛΩΝΕΙ ΟΤΙ ΑΥΤΟ ΤΟ ΠΡΟΪΟΝ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ
ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.EnglishHereby, Lexmark International, Inc., declares that this type of equipment is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC.EspañolPor medio de la presente, Lexmark International, Inc. declara que este producto cumple con los requisitos esenciales y
cualesquiera otras...

Waste from Electrical and Electronic Equipment (WEEE) directive
The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the European Union. We
encourage the recycling of our products. If you have further questions about recycling options, visit the Lexmark Web site at
www.lexmark.com  for your local sales office phone number.
Federal Communications Commission (FCC) compliance information statement
This equipment complies with Part 68 of the FCC rules and...