Lexmark Optra S 1250 Manual
Have a look at the manual Lexmark Optra S 1250 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 166 Lexmark manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
15Setting Up Your Printer Setting Up Your Printer Getting Started 6Reinstall the print cartridge. Align the side slides on the print cartridge with the slots on the print cartridge cradle. Use the colored arrows inside the printer for placement. 7Guide the print cartridge down as it drops into place.The cartridge snaps into place. 8Close the upper front door.
Setting Up Your Printer16 Setting Up Your Printer Getting Started Removing the 250-Sheet Input Tray The 250-sheet input tray is the standard tray in the printer. Remove the 250-sheet input tray by pulling it out of the printer. Remove any packing material.
17Setting Up Your Printer Setting Up Your Printer Getting Started Adding Names to the Paper Tray Knob The paper tray knob shows common paper sizes. It has spaces for you to write custom names or sizes. If you want to customize the paper tray knob, complete the following instructions. 1Turn the knob on the paper tray so the bar on the knob is parallel with the front of the tray. 2Reach underneath the tray and push up on the knob.
Setting Up Your Printer18 Setting Up Your Printer Getting Started 3Pull the knob out of the tray.Notice the label on the lower portion of the knob. The abbreviations for certain paper size names are pre- printed on the label. The size names areLGLfor legal-size paper,A4forA4paper,andLT Rfor letter-size paper. Notice the extra spaces on the label. 4Write your customized abbreviations on the label in the spaces provided.
19Setting Up Your Printer Setting Up Your Printer Getting Started 5Align the knob so the bar is parallel with the front of the tray and push the knob down.
Setting Up Your Printer20 Setting Up Your Printer Getting Started Loading the 250-Sheet Input Tray 1Squeeze the width guide lever and slide the width guide to the far right side of the tray. Note:Before you put paper in the tray, adjust the tray size for your paper. This example shows how to adjust for letter size paper (LTR). Notice thepaper size indicatorsprinted on the top left surface of the tray. These abbreviations indicate the paper sizes. The paper size indicators help you in the placement of the length guide. Width Guide (squeeze here)
21Setting Up Your Printer Setting Up Your Printer Getting Started 2Squeeze the length guide lever and slide the length guide to the correct position for the paper size you are loading. Note:Do not fill paper above the paper capacity mark (fill line) on theleftinsidewallofthepapertray.Thetopedgeofthe length guide serves as a fill line, also. If the paper stack exceeds the full level, the excess paper is pushed out the front of the tray when you install the tray. Also, paper may jam in the printer. 3Flex the paper back and forth.Do not fold or crease the paper. Straighten the edges on a level surface. Paper Size Indicators Paper Capacity Mark Length GuideTop Edge Length Guide Lever
Setting Up Your Printer22 Setting Up Your Printer Getting Started 4Place the paper into the paper tray with the recommended print side face down and the bottom edge going in first toward the length guide.Do not overload the paper tray. To load letterhead, see page 150. When the paper is loaded into the tray, the paper is stacked at an angle. The paper tray wall at the front of the tray is angled as this cross-section of the tray illustrates. If you readjust the length guide lever once the paper is in the tray, do not push it too far. Pushing the length guide lever too far causes the paper to move up along this angled wall and jam.
23Setting Up Your Printer Setting Up Your Printer Getting Started 5Squeeze the width guide lever and slide the width guide to the left until it lightly rests against the edge of the paper stack. 6Turn the knob for the paper size window to show the size of the paper you are loading, for example, LTR.This serves as a visual reminder of the paper size currently loaded. Width Guide (squeeze here) Paper Size WindowKnob
Setting Up Your Printer24 Setting Up Your Printer Getting Started 7Slide the paper tray all the way in until it snaps into place. 8Load paper in trays for any other drawers you have installed previously. Note:Paper is loaded into all trays in the same manner as the 250-sheet input tray. 9Insert the trays into the matching support units. Note:If you have purchased any other options, install them now.