Lexmark Optra S 1250 Manual
Have a look at the manual Lexmark Optra S 1250 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 166 Lexmark manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
315Memory and Option Cards MemoryandOptionCards Installing Options Installing an Option Card WARNING:Electronic components are easily damaged by static electricity. Touch something metal before you touch the card. Before you install the option card, follow the steps under “Accessing the Printer System Board” on page 293. If you need to remove an option card, see “Removing an Option Card” on page 319. 1Locate the option card connectors on the system board.If you are installing only one card, install it in connector 1. If you are installing multiple cards on a model with multiple connectors, use connector 1 first, connector 2 second, and connector 3 last. Connector 1 Connector 2 Connector 3
Memory and Option Cards316 MemoryandOptionCards Installing Options 2Locate the two screws on the back of the printer that attach the metal plate to the slot. 3Remove and save the two screws. Remove and discard the plate. 4Unpack the option card.Save the packing materials.
317Memory and Option Cards MemoryandOptionCards Installing Options 5Align the connector on the card with the option connector on the system board. 6Push in the card firmly until it is completely inserted into the system board connector.The two connectors should fit snugly together.
Memory and Option Cards318 MemoryandOptionCards Installing Options 7Insert the two screws saved from the metal plate (or the extra screws shipped with the option card) through the holes over and under the slot. Gently tighten the screws to secure the card. 8Ifyouneedtoinstallanotheroptioncardoranother option on the system board: -See “Option Cards” on page 308. -See “Printer Memory Option” on page 299. -See “Flash Memory Option” on page 304. 9See “Closing the Printer System Board” on page 297 to reattach the shield and side door. Note:To verify that the option is installed properly, see “Verifying the Installation of Options” on page 325.
319Memory and Option Cards MemoryandOptionCards Installing Options Removing an Option Card WARNING:Electronic components are easily damaged by static electricity. Touch something metal before you touch the card. 1If necessary, follow the steps under “Accessing the Printer System Board” starting on page 293. 2Locate the option you want to remove. See page 296. 3Loosen and remove the two screws over and under the slot. Gently pull the card out of the connector on the system board. 4Place the option card in its original packaging.If you did not save the packaging, wrap the card in paper and store it in a box. 5If you need to install a replacement card or another option on the system board: -See “Option Cards” on page 308. -See “Printer Memory Option” on page 299. -See “Flash Memory Option” on page 304. 6See “Closing the Printer System Board” on page 297 to reattach the shield and side door.
Memory and Option Cards320 MemoryandOptionCards Installing Options
Infrared Adapter Chapter Infrared Adapter321 Installing Options Infrared Adapter 17 An infrared adapter is available for your printer to let you print remotely from a computer equipped with an infrared port. The Tri-Port interface option card, which includes an infrared port, is also available for your printer to let you connect the infrared adapter to your printer. For more information see “Tri-Port Interface Option Card” on page 310. Connecting the Cable and Using the Infrared Adapter To connect the infrared adapter to your printer: 1Locate the infrared port on the optional Tri-Port interface card installed in your printer.If you need to install the Tri- Port interface option card, see “Installing an Option Card” on page 315.
Infrared Adapter322 Infrared Adapter Installing Options 2Plug the cable into the infrared port.The adapter has been plugged into the port correctly if any light on the infrared adapter comes on when the printer is on. 3Aim the computer infrared port at the infrared port on the front of the infrared adapter.Refer to the documentation that came with your computer for information about your computer infrared port.
323Infrared Adapter Infrared Adapter Installing Options 4Draw an imaginary line between the two infrared ports. Aim the infrared port on your computer within 15 degrees of either side of this line as shown. 5Send a job to print.If the job does not print correctly, see page 206.
Infrared Adapter324 Infrared Adapter Installing Options