Lexmark E462DTN User Manual

Menu itemDescription
Recycled
Paper
Card Stock
Transparency
Labels
Envelope
CottonSpecifies a paper type when the Recycled setting is selected in other menus
Notes:
Paper is the factory default setting.
The Recycled type must be supported by the selected tray or feeder in
order for you to print from that source.
Universal Setup menu
These menu items are used to specify the height, width, and feed direction of the Universal Paper Size. The Universal
Paper Size is a user‑defined paper size. It is listed...

Reports menu
Reports menu
To print a report, use the arrow buttons to navigate to the type of report you want, and then press .
Menu itemDescription
Menu Settings PagePrints a report containing information about paper loaded into trays, installed
memory, the total page count, alarms, timeouts, the printer control panel
language, the TCP/IP address, the status of supplies, the status of the network
connection, and other information
Device StatisticsPrints a report containing printer statistics such as...

Menu itemDescription
Print DirectoryPrints a list of all the resources stored on an optional flash memory card
Notes:
Job Buffer Size must be set to 100%.
The optional flash memory must be installed correctly and working
properly.
Asset ReportPrints a report containing asset information including the printer serial number
and model name. The report contains text and UPC barcodes that can be scanned
into an asset database.
Network/Ports menu
Active NIC menu
Menu itemDescription
Active NIC
Auto
Notes:
Auto...

Menu itemDescription
NPA Mode
Off
AutoSets the printer to perform the special processing required for bidirectional
communication following the conventions defined by the NPA protocol
Notes:
Auto is the factory default setting.
Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is updated.
Network Buffer
Auto
3K to Sets the size of the network input buffer
Notes:
Auto is the factory default setting.
The value can be changed in...

Reports menu (under the Network/Ports menu)
The Reports menu item is available from the Network/Ports menu:
Network/Ports > Standard Network or Network  > Std Network Setup or Net  Setup > Reports
Menu itemDescription
Print Setup Page
Print NetWare Setup
PagePrints a report containing information about the current network setup
Notes:
The Setup Page contains information about the network printer settings, such as the
TCP/IP address.
The NetWare Setup Page menu item appears only on models that support...

Network/Ports > Network Menu > Network Setup > TCP/IP
Menu itemDescription
Activate
On
OffActivates TCP/IP
Note: On is the factory default setting.
View HostnameLets you view the current TCP/IP hostname
Note: This can be changed only from the Embedded Web Server.
IP AddressLets you view or change the current TCP/IP Address information
Note: Manually setting the IP address sets the Enable DHCP and Enable Auto IP
settings to Off. It also sets Enable BOOTP and Enable RARP to Off on systems that
support...

This menu is available from the Network/Ports menu:
Network/Ports > Network Menu  > Network Setup  > IPv6
Menu itemDescription
Enable IPv6
On
OffEnables IPv6 in the printer
Note: On is the factory default setting.
Auto Configuration
On
OffSpecifies whether the network adapter accepts the automatic IPv6
address configuration entries provided by a router
Note: On is the factory default setting.
View Hostname
View Address
View Router AddressLets you view the current setting
Note: These settings can be...

AppleTalk menu
This menu is available from the Network/Ports menu:
Network/Ports > Network Menu  > Network Setup  > AppleTalk
Menu itemDescription
Activate
On
OffActivates or deactivates AppleTalk support
Note: On is the factory default setting.
View NameShows the assigned AppleTalk name
Note: The name can be changed only from the Embedded Web Server.
View AddressShows the assigned AppleTalk address
Note: The address can be changed only from the Embedded Web Server.
Set Zone
Provides a list of AppleTalk...

Menu itemDescription
NSQ/GSQ Mode
Yes
NoSpecifies the NSQ/GSQ Mode setting
Note: Yes is the factory default setting.
LexLink menu
This menu is available from the Network/Ports menu:
Network/Ports > Network Menu > Network Setup > LexLink menu
Menu itemDescription
Activate
On
OffActivates or deactivates LexLink support
Note: Off is the factory default setting.
View NicknameShows the assigned LexLink nickname
Note: The LexLink nickname can be changed only from the Embedded Web
Server.
USB menu
Menu...

Menu itemDescription
USB Buffer
Disabled
Auto
3K to Sets the size of the USB input buffer
Notes:
Auto is the factory default setting.
The Disabled setting turns off job buffering. Any jobs already buffered on the
disk are printed before normal processing is resumed.
The USB buffer size value can be changed in 1K increments.
The maximum size allowed depends on the amount of memory in the printer,
the size of the other link buffers, and whether the Resource Save setting is On
or Off.
To increase the...