Lexmark E462DTN User Manual

ChooseTo
On (Text/Graphics)
Note: This setting is best suited for printing text and line
graphics.Reduce printer noise.
Print jobs are processed at one‑half the normal
processing speed.
Printer engine motors do not start until a job is ready to
print. There is a short delay before the first page is printed.
Fans run at reduced speed or are turned off.
If your printer has faxing capability, fax sounds are
reduced or disabled, including those made by the fax
speaker and ringer. The fax is placed in standby...

Using the printer control panel
1
Make sure the printer is on and Ready appears.
2Press .
3Press the up or down arrow button until Settings appears, and then press .
4Press the up or down arrow button until General Settings appears, and then press .
5Press the up or down arrow button until Timeouts appears, and then press .
6Press the up or down arrow button until Power Saver appears, and then press .
7Press the up or down arrow button to increase or decrease the number of minutes before the printer...

Returning Lexmark cartridges for reuse or recycling
The Lexmark Cartridge Collection Program diverts millions of Lexmark cartridges from landfills annually by making it
both easy and free for Lexmark customers to return used cartridges to Lexmark for reuse or recycling. One hundred
percent of the empty cartridges returned to Lexmark are either reused or demanufactured for recycling. Boxes used
to return the cartridges are also recycled.
To return Lexmark cartridges for reuse or recycling, follow the...

Loading paper and specialty media
This section explains how to load the 250- and 550-sheet trays and the multipurpose feeder. It also includes information
about paper orientation, setting the Paper Size and Paper Type, and linking and unlinking trays.
Setting the paper size and type
1Make sure that the printer is on and Ready appears.
2From the printer control panel, press .
3Press the up or down arrow button until Paper Menu appears, and then press .
4Press the up or down arrow button until Paper...

Specify the paper height and width
Defining a specific height and width measurement for the Universal paper size (in the portrait orientation) allows the
printer to support the size, including support for standard features such as duplex printing and printing multiple pages
on one sheet.
Note: Select Portrait Height to adjust the paper height setting or Paper Width to adjust the paper width
setting, or adjust both. Instructions to adjust both follow.
1From the Universal Setup menu, press the up or down...

2Squeeze and slide the guides to the correct position for the paper size you are loading.
For long paper like A4 or legal, squeeze and slide the length guide backwards to accommodate the length of paper
you are loading.
Loading paper and specialty media46
Downloaded From ManualsPrinter.com Manuals 

If you are loading A6‑size paper:
aSqueeze and slide the length guide toward the center of the tray to the A5 size position.
bRaise the A6 backstop.
Notes:
Tray 1 accommodates only 150 sheets of A6‑size paper. Notice the maximum fill line on the A6 backstop
which indicates the maximum height for loading A6‑size paper. Do not try to overload the tray.
A6‑size paper cannot be loaded in Tray 2.
Note: Use the size indicators on the bottom of the tray to help position the guide.
3Flex a stack of paper back...

1Maximum fill line
Load letterhead with the top edge of the sheet toward the front of the tray and the design facedown.
5Squeeze and slide the guides to lightly touch the side of the stack.
Loading paper and specialty media48
Downloaded From ManualsPrinter.com Manuals 

6Insert the tray.
7If the paper type you loaded differs from the type that was previously loaded in the tray, then change the Paper
Size/Type setting from the printer control panel Paper menu.
Using the multipurpose feeder
You may want to use the multipurpose feeder when you print on different sizes and types of papers or specialty media,
such as card stock, transparencies, paper labels, and envelopes. You may also want to use the multipurpose feeder for
single‑page print jobs on letterhead or on other...

2Grasp the raised handle, and pull the extension forward.
3Grasp the handle, and pull the extension so it flips forward.
4Guide the extension down gently so the multipurpose feeder is extended fully and open.
Loading paper and specialty media50
Downloaded From ManualsPrinter.com Manuals