Lexmark E462DTN User Manual

Parallel menu
Menu itemDescription
PCL SmartSwitch
On
OffSets the printer to automatically switch to PCL emulation when a print job received
through a USB port requires it, regardless of the default printer language
Notes:
On is the factory default setting.
When the Off setting is used, the printer does not examine incoming data.
When the Off setting is used, the printer uses PostScript emulation if PS
SmartSwitch is set to On. It uses the default printer language specified in the
Setup menu if PS...

Menu itemDescription
Advanced Status
Off
OnEnables bidirectional communication through the parallel port
Notes:
On is the factory default setting.
The Off setting disables parallel port negotiation.
Protocol
Standard
FastbytesSpecifies the parallel port protocol
Notes:
Fastbytes is the factory default setting. It provides compatibility with most
existing parallel ports and is the recommended setting.
The Standard setting tries to resolve parallel port communication problems.
Honor Init
On
OffDetermines...

SMTP Setup menu
Use the following menu to configure the SMTP server.
Menu itemDescription
Primary SMTP Gateway
Primary SMTP Gateway Port
Secondary SMTP Gateway
Secondary SMTP Gateway PortSpecifies SMTP server and port information
Note: 25 is the factory default setting for each SMTP Gateway Port
menu item.
SMTP Timeout
5–30Specifies the amount of time in seconds before the server stops trying to
send the e‑mail
Note: 30 seconds is the factory default setting.
Reply AddressSpecifies server information....

Security menu
Miscellaneous menu
Menu itemDescription
Login Restrictions
Login failures
Failure time frame
Lockout time
Panel Login timeout
Remote Login timeoutLimits the number and time frames of failed login attempts from the printer control
panel before all users are locked out
Notes:
“Login failures” specifies the number of failed login attempts before users are
locked out. Settings range from 1–50. 3 attempts is the factory default setting.
“Failure time frame” specifies the time frame during which...

Security Audit Log menu
Menu itemDescription
Export LogEnables an authorized user to export the security log
Notes:
To export the log from the printer control panel, a flash drive must be
attached to the printer.
From the Embedded Web Server, the log can be downloaded to a computer.
Delete Log
Delete now
Do not deleteSpecifies whether audit reports of print jobs are deleted
Note: Delete now is the factory default setting.
Configure Log
Enable Audit
Yes
No
Enable Remote Syslog
No
Yes
Remote Syslog...

Set Date/Time menu
Menu itemDescription
View Date/TimeLets you view the current date and time settings for the printer. The format for the
date and time is: YYYY‑MM‑DD HH:MM:
YYYY is the four‑digit year
MM is a two‑digit month
DD is a two‑digit date
HH is a two‑digit hour
MM is a two‑digit minute
Set Date/TimeLets you enter the date and time
Note: Date/Time is set in YYYY-MM-DD HH:MM format.
Time Zone
Lets you select the time zone
Note: GMT is the factory default setting.
Observe DST
On
OffSets the...

Settings menu
General Settings menu
Menu itemDescription
Display Language
English
Francais
Deutsch
Italiano
Espanol
Dansk
Norsk
Nederlands
Svenska
Portuguese
Suomi
Russian
Polski
Magyar
Turkce
Cesky
Simplified Chinese
Traditional Chinese
Korean
JapaneseSets the language of the text appearing on the display
Eco-Mode
Off
Energy
Energy/Paper
PaperMinimizes the use of energy, paper, or specialty media
Notes:
Off is the factory default setting. Off resets the printer to its
factory default settings.
The...

Menu itemDescription
Run Initial setup
Yes
NoInstructs the printer to run the setup wizard
Notes:
Yes is the factory default setting.
After completing the setup wizard by selecting Done at the
country or region select screen, the default setting becomes
No.
Paper Sizes
US
MetricSets paper sizes to use the standard US sizes, which may also be
used in other countries, or to use metric sizes
Notes:
US is the factory default setting.
Changing this setting also changes the Units of Measurement
setting in the...

Menu itemDescription
Timeouts
Print Timeout
Disabled
1 sec–255 secSets the amount of time in seconds the printer waits to receive an
end‑of‑job message before canceling the remainder of the print job
Notes:
90 seconds is the factory default setting.
When the timer expires, any partially printed page still in the
printer is printed, and then the printer checks to see if any
new print jobs are waiting.
Print Timeout is available only when using PCL or PPDS
emulation. This setting has no effect on...

Menu itemDescription
Factory Defaults
Do Not Restore
Restore NowReturns the printer settings to the factory default settings
Notes:
Do Not Restore is the factory default setting. Do Not Restore
keeps the user‑defined settings.
Restore Now returns all printer settings to the factory default
settings except Network/Ports menu settings. All downloads
stored in RAM are deleted. Downloads stored in flash
memory are not affected.
Custom Home Message
Off
IP Address
Hostname
Contact Name
Location
Zero...