Lexmark E462DTN User Manual

You can set an expiration time for confidential print jobs. When a user has not printed the jobs within the designated
time period, all of the jobs for that user are deleted.
Note: This functionality is available only on network printers.
To modify the confidential print settings:
1Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP
address in the TCP/IP section.
2Click Settings....

4Press the up or down arrow button until Factory Defaults appears, and then press .
5Press the up or down arrow button until Restore Now appears, and then press .
Restoring Factory Defaults appears. Administrative support122
Downloaded From ManualsPrinter.com Manuals 

Clearing jams
By carefully selecting paper and specialty media and loading it properly, you should be able to avoid most jams. For
more information, see “Avoiding jams” on page 123. If jams do occur, follow the steps outlined in this chapter.
Warning—Potential Damage: Never use any tool to remove a jam. Doing so could permanently damage the fuser.
To resolve jam messages, you must clear the entire paper path, and then press 
 to clear the message and resume
printing. The printer prints a new copy of the...

Identifying jams in the paper path
The following illustration shows the path that paper travels through the printer. The path varies depending on the input
source (tray or feeder) and depending on whether a duplex (two‑sided) print job is being sent.
When a jam occurs, a jam message appears, indicating the region of the jam or the number of jammed sheets. The
three‑digit jam prefix numbers are given in the following illustration to show where each jam occurs.
24x
233, 234,
24x233, 234,
24x
251
200 201...

1Standard exit bin
2Front door
3Multipurpose feeder door
4Tray 1
5Tray 2
6Rear door
Jam message numbers and how to access each jam
Jam numberTo access the jam
200 Try one or more of the following:
Remove Tray 1.
Open the front door, and then remove the photoconductor kit.
201 Open the front door, and then remove the photoconductor kit.
202 Open the front door, and then open the rear door.
231 Open the front door, and then open the rear door.
Note: For alternative access to the jam, remove Tray 1, and...

Jam numberTo access the jam
234 Try one or more of the following:
Open the front door, and then open the rear door.
Remove Tray 1, and then depress the lever.
235 Remove the jam from the standard exit bin.
24x Remove Tray 2.
251 Try one or more of the following:
If the sheet is visible in the multipurpose feeder, gently pull it from the front of the multipurpose
feeder.
If it is not visible, open the front door, and then remove the unit. Lift the flap at the front of the
printer, and then remove any...

3If you do not see it, open the front door, and then remove the photoconductor kit and toner cartridge (unit).
Note: When the photoconductor kit and toner cartridge are together, they are called a unit.
4Lift the flap in front of the printer, and remove any jammed sheets.
5Align and insert the unit.
6Close the front door.
7Insert the tray.
8Press . Clearing jams127
Downloaded From ManualsPrinter.com Manuals 

201 paper jam
CAUTION—HOT SURFACE: The fuser and the inside of the printer near the fuser may be hot. To reduce the risk
of injury from a hot component, allow the surface to cool before removing paper from this area.
1Open the front door, and then remove the unit.
2Lift the flap in front of the printer, and then remove any jammed sheets.
3Align and insert the unit.
4Close the front door.
5Press . Clearing jams128
Downloaded From ManualsPrinter.com Manuals 

202 paper jam
CAUTION—HOT SURFACE: The fuser and the inside of the printer near the fuser may be hot. To reduce the risk
of injury from a hot component, allow the surface to cool before removing paper from this area.
1Open the front door, and then remove the unit.
2Lift the flap in front of the printer, and then remove any jammed sheets.
3Open the rear door.
Clearing jams129
Downloaded From ManualsPrinter.com Manuals 

4Remove the jam.
5Align and insert the unit.
6Close the rear door.
7Close the front door.
8Press .
231 paper jam
CAUTION—HOT SURFACE: The fuser and the inside of the printer near the fuser may be hot. To reduce the risk
of injury from a hot component, allow the surface to cool before removing paper from this area.
1Open the front door.
2Open the rear door. Clearing jams130
Downloaded From ManualsPrinter.com Manuals