Home
>
Land Rover
>
Automobile
>
Land Rover Range Rover 2002my On Workshop Procedures Lm 6th Edition Nas Rover Manual
Land Rover Range Rover 2002my On Workshop Procedures Lm 6th Edition Nas Rover Manual
Here you can view all the pages of manual Land Rover Range Rover 2002my On Workshop Procedures Lm 6th Edition Nas Rover Manual. The Land Rover manuals for Automobile are available online for free. You can easily download all the documents as PDF.
Page 81
GENERAL DATA 04-16 Wheels and tyres WARNING: The following precautions must be observed when using the space saver spare wheel: lThe space saver spare wheel is for temporary use only, it must be replaced with the repaired standard wheel as soon as possible. lOnly one space saver is to be used on the vehicle at any one time with a maximum speed of 50 mph (80 km/h) being observed. lThe inflation pressure of the space saver tyre must be maintained at 4.2 bar (60 lbf.in2). lThe use of snow chains is not...
Page 82
GENERAL DATA 04-17 Air conditioning Type CFC free, sealed closed loop Compressor: ⇒ Displacement 177.7 cm 3/rev (10.84 in3/rev) ⇒ Relief valve operating pressure 34.3 to 41.4 bar (497 to 600 lbf.in 2) ⇒ Refrigerant oil quantity 110 cc (3.8 fl.ozs) ⇒ Refrigerant oil Nippon Denso ND-8 ⇒ Refrigerant HFC - R134A ⇒ Refrigerant charge quantity 510 ± 10 grammes (17.8 ± 0.8 ozs) Oil quantities lost when changing individual components: ⇒ Condenser/receiver drier ⇒ Evaporator ⇒ Pipe/hose30 ml 20 ml 10 ml
Page 83
GENERAL DATA 04-18 Electrical - Td6 Electrical - V8 System 12 volt, negative earth Battery: ⇒ Type 12 volt ⇒ Capacity 110 amp hour Alternator: ⇒ Type Valeo A14V, air cooled ⇒ Maximum output 150 amp Starter motor: ⇒ Type Nippon Denso, E95 RL ⇒ Power 2.2 kW System 12 volt, negative earth Battery: ⇒ Type 12 volt ⇒ Capacity 110 amp hour Alternator: ⇒ Type Bosch KF, water cooled ⇒ Maximum output 150 amp Starter motor ⇒ Type Nippon Denso, 112V RA ⇒ Power 1.8 kW
Page 84
GENERAL DATA 04-19 Dimensions * Measurement taken with vehicle at unladen weight. Weights CAUTION: Axle weights are non additive. The individual maximum weights and gross vehicle weight must not be exceeded. Overall length 4950 mm (193.1 in) Overall width (including mirrors) 2191 mm (85.4 in) Overall width (mirrors folded) 2009 mm (78.4 in) Overall height *: ⇒ Access ⇒ Motorway ⇒ Standard ⇒ Off road1820 mm (71.1 in) 1840 mm (71.7 in) 1863 mm (73.1 in) 1913 mm (74.6 in) Minimum ground clearance - Off...
Page 86
IDENTIFICATION NUMBERS 05-1 IDE NTIFICATION NUMBERS Vehicle Identification Number Location The Vehicle Identification Number (VIN) plate is on a label; attached to the inner wing, in front of the LH suspension turret. The VIN is also stamped in the following locations: lOn a plate behind the LH lower corner of the windscreen. lOn the front of the RH suspension turret. RH Suspension turret VIN Windscreen VINInner wing VIN On NAS, Canadian and Gulf models, the inner wing VIN plate is replaced by a...
Page 87
IDENTIFICATION NUMBERS 05-2 VIN plate content The VIN plate contains the following information: aModel name bEngine description cCountry text dDiesel indicator eColour code/group fReserved gHeadlight code hLand Rover iEU type approval jVehicle Identification Number (VIN) kTotal weight lTowing weight mFront axle weight nRear axle weight oExterior paint stickerVehicle identification number - except NAS and Canada Example: SALLMAMA41A001099 Vehicle identification number - NAS and Canada Example:...
Page 88
IDENTIFICATION NUMBERS 05-3 Identification Number Locations Engine number Td6 Engine The Td6 engine serial number is stamped on the LH side of the cylinder block V8 Engine The V8 engine serial number is stamped on the top of the cylinder block at the front of the engine, beneath the throttle housing.Td6 automatic gearbox number The GM automatic gearbox serial number is on a plate attached to the LH side of the gearbox. V8 automatic gearbox number The ZF automatic gearbox serial number is on a plate...
Page 89
IDENTIFICATION NUMBERS 05-4 Transfer box number The New Venture Gears transfer box serial number is etched on a boss located at the rear of the unit above the oil drain plug.Paint code - NAS, Canadian and Gulf markets only The vehicle paint colour is shown on the LH inner wing. NOTE: Only the paint colour is shown, and not the paint code. M01 0318
Page 90
TORQUE WRENCH SETTINGS 06-1 TORQUE WRE NCH SETTINGS Maintenance TORQUE DESCRIPTION METRIC IMPERIAL Spark plugs31 Nm 23 lbf.ft Td6 oil sump drain plug 23 Nm 17 lbf.ft Td6 oil filter cap 25 Nm 18 lbf.ft V8 oil sump drain plug 17 Nm 13 lbf.ft V8 oil filter cap 25 Nm 18 lbf.ft Td6 (GM) Automatic gearbox oil filler/level plug 20 Nm 15 lbf.ft V8 (ZF) Automatic gearbox oil filler/level plug 35 Nm 26 lbf.ft Road wheel nuts 140 Nm 103 lbf.ft