Kyocera TASKalfa 300i User Manual

Copying Functions
4-19
4
Booklet from Sheets
The Booklet copying option allows you to copy sheet originals and produce booklets such as small brochures 
or pamphlets. A booklet, such as a maga zine, is made by folding at the center.
You can copy the cover page onto colored paper or thick paper. Paper for the cover is supplied from the multi 
purpose tray. To feed the cover pa per from the cassette, refer to Paper Source for Cover Paper on page 8-10.
The supported original and paper sizes are as follows....

Copying Functions
4-20
2Place the originals on the platen.
3Press [Layout/Edit] and then [Booklet].
4Press [1-sided>>Booklet] to produce a booklet 
from single-sided originals.
Press [2-sided>>Booklet] to produce a booklet 
from two-sided originals.
Press [Book>>Booklet] to produce a booklet from 
an open book original.
5If you selected [2-sided>>Booklet] or 
[Book>>Booklet], choose the binding orientation in 
Finishing.
If you selected [1-sided>>Booklet], choose the 
binding orientation in Finishing....

Copying Functions
4-21
4
Cover Mode
Add a cover to the finished copies. You can copy the first page and/or the last page onto colored paper or thick 
paper fed from the different paper source than the regul ar one. The following two options are available. Paper 
for the cover is supplied from the multi purpose tray.
To feed the cover paper from the cassette, refer to Paper Source for Cover Paper on page 8-10 .
The procedure for using Cover mode copying is explained below.
1Press the  Copy key.
2Place the...

Copying Functions
4-22
Form Overlay
Copy the original images onto the form. Once you scan 
and register the form, the form is overlaid onto the 
original. You can also use a form that is already 
registered in the machines memory.
NOTE: To register a form in advance, refer to Form for 
Form Overlay Box on page 6-17 for details.
Follow the steps as below for form overlay.
1Press the  Copy key.
2Press [Layout/Edit] and then [Form Overlay].
3Press [Scan New Form] to  use the first page of 
originals as a...

Copying Functions
4-23
4
Page Numbering
Number multiple pages of originals in sequential order. The formats for numbering are [-1-], [P.1] or [1/n]. The 
format [1/n] prints the total number of pages in the place of  n.
Select  Top Left,  Top Middle , Top Right , Bottom Left , Bottom Middle or  Bottom Right as the page numbering 
position.
Use the procedure below to insert page numbers on your copies.
1Press the  Copy key.
2Place the originals in the document processor or on 
the platen.
3Press...

Copying Functions
4-24
9The total number of pages n in the format [1/n] can 
be changed manually. Press [Denominator #] and 
select [Manual]. Press [+] or [–] to enter the total 
number of pages and press [OK]. You can also 
enter the number with the numeric keys after 
pressing [# Keys].
10Press [Original Orientation] to choose orientation of 
the originals, either [Top Edge Top] or [Top Edge 
Left]. Press [OK].
11Press [OK].
12Press the  Start key to start copying.
Downloaded From ManualsPrinter.com...

Copying Functions
4-25
4
Memo Mode
Delivers copies with a space for adding notes. You can also copy two originals onto the same sheet with a space 
or add lines to indicate page boundaries.
NOTE: Memo mode is available for the copy paper sizes of Ledger, Legal, Oficio II, 8.5×13.5, Letter, Letter-R, 
Statement-R, A3, B4, Folio, A4, A4-R, B5, B5-R, A5-R, 8K, 16K and 16K-R.
Layout A
Reduces images of each original page for printing onto 
half of a page, leaving the other half blank for notes.
Layout B...

Copying Functions
4-26
Types of Page Boundary Lines
The following boundary lines are available.
Use the procedure below to insert page boundary lines on your copies.
1Press the Copy key.
2Place the originals on the platen.
3Press [Layout/Edit] and then [Memo Page].
4Press [Layout A] or [Layout B]. Select the page 
layout from  Layout.
5Press [Border Line] to select the page boundary 
line. Press [OK].
6Press [Original Orientation] to select orientation of 
the originals, either [Top Edge Top] or [Top...

Copying Functions
4-27
4
Image Repeat/Double Copy
Tiles the 1 copied sheet with an original image. You can 
also specify the area of the original to repeat.
Image Repeat Copies the original image multiple times onto 1 sheet at 
a specified magnification.
You can also specify how much of the original is 
repeatedly copied.
Double Copy Makes 2 copies of the same original on a single sheet.
For example, you can double-copy an A4 original onto 
an A3 sheet which you then cut in half to make 2 copies 
that...

Copying Functions
4-28
7Press [+] or [–] to input the area of the original to be 
repeated.
With metric models, you can enter the border width 
directly using the numeric keys after pressing [#-
Keys].
Y1: Length from top left of platen to top edge of 
repeat area
X1 : Length from Height from top left of platen to left 
edge of repeat area
Y2 : Height of repeat area
X2 : Width of repeat area
8Press [OK].
9Press the  Start key. Copying begins.
Downloaded From ManualsPrinter.com Manuals