Kyocera TASKalfa 300i User Manual

Copying Functions
4-9
4
Selecting How to Copy Originals
Select whether you wish to create individual copies on different size paper matching the original sizes or to 
produce all copies on the same size paper.
NOTE: This function is available regardless of whether originals have the same width or not.
The table below shows the finished document sizes for the different original size options.
Use the procedure below to copy mixed size originals.
1Press the  Copy key.
2Place originals on the document...

Copying Functions
4-10
Original Orientation
Select the original orientation to use the following functions.
•Zoom (XY Zoom)
•Duplex
• Margin/Centering originals
• Border erase
• Combine mode
• Memo mode
• Page numbering
• Booklets
• Stapling (optional feature)
* If [On] is selected as the Orientation Confirmation on page 8-14  setting in the System Menu, the selection 
screen for original orientation appears when you select any of the above functions.
When placing originals on the platen
When placing...

Copying Functions
4-11
4
Use the procedure below to select the orientation when placing the originals on the platen.
1Press the Copy key.
2Place the originals on the platen.
3Press [Org./Paper/Finishing] and then [Original 
Orientation].
4Select [Top Edge Top] or [Top Edge Left] as the way 
the original is oriented.
5Press [OK].
6Press the  Start key to start copying.
Original Orientation
Top Edge Left
Select the orientation of the
original document's top edge.
Top Edge Top
Ready to copy.Copies...

Copying Functions
4-12
Output Destination
You can use the procedure below to select an output destination such as the optional document finisher for your 
copies.
NOTE: Optional output destinations include the job sepa rator, built-in finisher, and document finisher.
The table below shows the av ailable output destinations.
NOTE: To change default destination for copies, refer to  Paper Output on page 8-13 for details.
Use the procedure below to select the output destination.
1Press the  Copy key.
2Place...

Copying Functions
4-13
4
Combine Mode
This mode allows you to copy 2 or 4 originals combined onto a single page. 2-in-1 mode or 4-in-1 mode. The 
page boundary of each original can be indicated.
NOTE: Combine mode is available for the copy paper sizes of A3, B4, Folio, A4, A4-R, B5, B5-R, A5-R, 
Ledger, Legal, Oficio II, 8.5×13.5, Letter, Letter-R, Statement-R, 8K, 16K and 16K-R.
2-in-1 Mode
For copying two originals onto a single sheet. This mode  can be used with Duplex mode to copy four originals...

Copying Functions
4-14
Types of Page Boundary Lines
The following types of the boundary lines are available.
The procedure for using Combine mode copying is explained below.
1Press the Copy key.
2Place the originals on the platen.
3Press [Layout/Edit] and then [Combine].
4Press [2 in 1] or [4 in 1], and choose the page layout 
of Layout.
5Press [Border Line] to choose the type of the lines 
to indicate page boundaries. Press [OK].
6Press [Original Orientation] to choose orientation of 
the originals,...

Copying Functions
4-15
4
Margin/Centering Mode
Shift the original image to make space on the copy for binding on the left (right) or top (bottom) side.
When you copy onto paper different from the original size, you can center the original image on the paper.
The following margin  widths are available.
Margin on the Back Side
When duplex copying, you can also specify the margin on the back side.
Auto
When [Auto] is selected, an appropriate margin is applie d automatically on the rear page depending on a...

Copying Functions
4-16If you selected [Auto], press [OK]. If you pressed 
[Manual], enter the margins in the displayed screen 
and then press [OK].
Press [Centering] to center the original image on 
the paper.
5Press [Original Orientation] to choose orientation of 
the originals, either [Top Edge Top] or [Top Edge 
Left]. Then press [OK].
6Press [OK].
7Press the 
Start key to start copying.
Status 08/08/2009    10:10
Ready to copy.Copies
Cancel OK
Margin/Centering - Back Page
Place original.
Add Shortcut...

Copying Functions
4-17
4
Border Erase
Use Border Erase to remove black shadows that appear around the outside of the original when making copies. 
The following options can be selected.
Border Erase Sheet
Erases black borders around the single sheet original.
Border Erase Book
Erases black borders around the edges and in the 
middle of the original such as a thick book. You can 
specify the widths individually to erase the borders 
around the edges and in the center of the book.
Individual Border Erase...

Copying Functions
4-18
Border Erase to Back Page
When scanning a 2-sided original, this allows you to erase the borders on the back of the original. The table 
below shows the available settings.
NOTE: You can change the default setting for Border Erase to Back Page. For details, refer to  Paper 
Selection on page 8-25.
Use the procedure below to erase borders when copying.
1Press the  Copy key.
2Place the originals on the platen.
3Press [Layout/Edit] and then [Border Erase].
4Select [Border Erase Sheet]...