Kyocera TASKalfa 300i User Manual

Copying Functions
4-29
4
EcoPrint
Use EcoPrint to save toner when printing. Use this function for test copies or any other occasion where high 
quality print is unnecessary.
The procedure for making copies us ing EcoPrint is explained below.
1Press the Copy key.
2Place the originals on the platen.
3Press [Image Quality] and then [EcoPrint].
4Press [On].
5Press [OK].
6Press the  Start key to start copying.
Status
Ready to copy.Copies
Cancel OK
EcoPrint
On
Conserve toner when printing.
Use EcoPrint for...

Copying Functions
4-30
Sharpness Adjust
Adjust the sharpness of image outlines. When copying penciled originals with rough or broken lines, clear copies 
can be taken by adjusting sharpness toward [Sharpen]. When copying images made up of patterned dots such 
as magazine photos, in which moire
* patterns appear, edge softening and weakening of the moire effect can be 
obtained by setting the sharpness toward [Unsharpen].
* Patterns that are created by irregular distribution of halftone dots.
Follow the...

Copying Functions
4-31
4
Continuous Scan
When a large number of originals cannot be placed in the document processor at one time, the originals can be 
scanned in separate batches and then copied as one jo b. With this function, originals are scanned until you 
press [Scan Finish].
Any of the following settings can be changed during scanning.
If you use Job Build, you can insert a blank paper duri ng scanning or a blank page during duplex copying.
The procedure for making copies using Continuous Scan is...

Copying Functions
4-32
Auto Image Rotation
Automatically rotates the image when the sizes of the original and the loaded paper matches but the orientations 
are different. The images will be rotated 90 ° counter-clockwise prior to copying.
NOTE: To set Auto Image Rotation as the default mode, refer to Auto Image Rotation on page 8-21 .
The procedure for making copies using Auto Image Rotation is explained below.
1Press the  Copy key.
2Place the originals on the platen.
3Press [Advanced Setup] and then...

Copying Functions
4-33
4
Mirror Image
Copies the mirrored image of the original.
NOTE: This function is only available for black and white copy mode.
Use the procedure below to make mirror image copies.
1Press the  Copy key.
2Place the originals on the platen.
3Press [Advanced Setup] and then [Mirror Image].
4Press [On] to select Mirror Image.
5Press [OK].
6Press the  Start key to start copying.
Downloaded From ManualsPrinter.com Manuals 

Copying Functions
4-34
Job Finish Notice
Sends a notice by e-mail when a job is completed. User can be notified of the completion of a copy job while 
working at a remote desk, saving the time spent  waiting beside the machine for copying to finish.
NOTE: PC should be configured in advance so that E-mail can be used.
Example of Job Finish Notice
Use the procedure below to enable job finish notification when making copies.
1Press the Copy  key.
2Place the originals on the platen.
3Press [Advanced Setup]...

Copying Functions
4-35
4
File Name
Names a copy job. Add other information such as date and time or job number as necessary. You can check a 
job history or job status using the job name, date and time, or job number specified here.
Use the procedure below to assign a name to your copy job.
1Press the  Copy key.
2Place the originals on the platen.
3Press [Advanced Setup] and then [File Name Entry].
4Press [File Name], enter th e name for a copy job, 
and press [OK].
To add date and time, press [Date and...

Copying Functions
4-36
Repeat Copy
Enable additional copies in the desired quantity as necessary after a copy job is completed. For confidential 
documents, you can set up a pass code for the use of Repeat Copy. In such a case, the correct pass code must 
be entered when using  Repeat Copy or copies will not be delivered.
IMPORTANT: A Repeat Copy job is cleared when the main power switch is turned off.
Repeat Copy is not available when the machine is  equipped with the optional Data Security Kit.
Repeat...

Copying Functions
4-37
4
Outputting Repeat Copy Jobs
The Repeat Copy jobs are stored in the Document Box. Refer to Job Box on page 3-31 to print out the Repeat 
Copy jobs.
Maximum Number of Repeat Copy Jobs Retained
You can use the procedure below to change the maximum number of copy jobs that can be retained in the 
document box.
Use the procedure below to change the maximum number of copy jobs retained.
1Press the  System Menu  key.
2Press [Document Box/Removable Memory] and 
then [Next] of Job Box....

Copying Functions
4-38
Downloaded From ManualsPrinter.com Manuals