Kyocera KM C2525E User Manual

							Troubleshooting
6-25
2Remove any jammed paper.
If the paper tears, remove any loose scraps from the 
machine.
3Close left cover 2.
Fixing Unit
Follow the steps below to clear paper 
jams in the fixing unit. 
1Open left cover 1.
2Remove any jammed paper.
If the paper tears, remove any loose scraps from the 
machine.
3Open duplex unit A1. 
Paper misfeed.
3.Open fixing cover A2 to check
paper i nsi de.
4.Close the cover. 2.Open duplex unit A1 and remove any  1.Remov e pa per .
JAM 00
Downloaded From ManualsPrinter.com Manuals 
						

							Troubleshooting
6-26
4Remove any jammed paper.
If the paper tears, remove any loose scraps from the 
machine.
5Open fixing unit cover A2.
6Remove any jammed paper.
If the paper tears, remove any loose scraps from the 
machine.
7If jammed paper can be seen around the eject section, 
remove by pulling toward you. 
8Set fixing unit A2 and duplex unit A1 securely to each 
original position and close left cover 1. 
IMPORTANT: Push the indicated position to close left 
cover 1 securely.
Caution: The fixing unit of this product is extremely hot. Take sufficient care when 
working in this area, as there is a danger of getting burned.
Downloaded From ManualsPrinter.com Manuals 
						

							Troubleshooting
6-27
Document Processor (option)
Follow the steps below to clear paper 
jams in the document processor.
1Remove any originals on the original table. 
2Open the document processor cover.
3Remove the jammed paper.
If the original cannot be easily removed, turn the feed 
knob. The original will move to a more easily 
accessible location. 
If the original tears, remove any loose scraps from 
inside the machine. 
Paper misfeed.
3.Turn the left dial.
4.Remove the original.
5.Cl ose the document processor  top cov
e
2.Hold up the reverse unit. 1.Open the document processor  top cove
JAM 00
Downloaded From ManualsPrinter.com Manuals 
						

							Troubleshooting
6-28
4Lift up the reverse unit.
5Remove the jammed paper.
If the original tears, remove any loose scraps from 
inside the machine. 
6Return the reverse unit to its original position and close the document processor cover.
7Replace the originals into the original table. 
Document Finisher (option)
If a paper jam occurs in the optional document finisher or 3000 sheet document finisher, clear jams 
according to the corresponding Operation Guide. 
Downloaded From ManualsPrinter.com Manuals 
						

							Appendix-1
Appendix
This section explains the specifications of this device. 
• Body...Appendix-2
• Copying Performance...Appendix-3
• Printing Performance...Appendix-4
• Scanning Performance...Appendix-4
• Document Processor (option)...Appendix-5
• Paper Feeder (option)...Appendix-5
• 3000 Sheet Paper Feeder (option)...Appendix-5
• Document Finisher (option)...Appendix-6
• 3000 Sheet Document Finisher (option)...Appendix-6
• Job Separator (option)...Appendix-7
• Environmental Specifications...Appendix-7
Downloaded From ManualsPrinter.com Manuals 
						

							Appendix
Appendix-2
Specifications
NOTE: These specifications are subject to change without notice.
Body
Copying System Dry static transfer copy system (Laser), Tandem drum system
Supported Original Types Sheet, Book, 3-dimensional objects (maximum original size: 
11 × 17/A3)
Copy Sizes
Cassette 1, 2
MP Tray
During Duplex Usage
Non-Copying Margin11 × 1 7  ,  8
1/2× 14, 11 × 81/2, 81/2×11, 51/2×81/2, 81/2× 13, 
8
1/2×131/2, A3, B4, A4, A4R, B5, B5R, A5R, Folio, 8K, 16K, 16KR
11 × 1 7   -  5
1/2×81/2, A3 - A6R, 8K, 16K, 16KR, YOUKEI 2, 
YOUKEI 4
11 × 1 7   -  5
1/2×81/2, A3 - A5R
4mm or less
Paper Supply Capacity
Cassette 1
Cassette 2
MP Tray500 sheets (80 g/m
2, 11 × 81/2/A4 or smaller), 250 sheets (80 g/m2, 
8
1/2× 14/B4 or larger)
500 sheets (80 g/m
2)
100 sheets (80 g/m
2, 11 × 81/2/A4 or smaller), 50 sheets (80 g/m2, 
8
1/2× 14/B4 or larger)
Output Tray Capacity 250 Sheets (80 g/m
2)
Warm-up Time Less than 45 seconds
Recovery time from energy save mode: 30 seconds or less
Recovery time from sleep mode: 45 seconds or less
(Room temperature 71.6 °F/22 °C, humidity 60 %)
Memory
For Copying/
For Scanner 
For Printing 
Additional Memory768 MB
256 MB
Printer: 128 MB, 256 MB, 512 MB
Operating Environment
Temperature
Humidity
Altitude
Brightness10 to 32.5 °C (However, the humidity should be 70 % or less when the 
temperature is 90.5 °F (32.5 °C))
15 to 80 % (However, the temperature should be 86 °F or less (30 °C 
or less) when the humidity is 80 %)
2,500 m or less
1,500 lux or less
Power Supply AC 120 V 60 Hz 12 A
AC 220 to 240 V 50 Hz 7.2 A
Dimensions
(W) × (D) × (H)23
13/16×26×295/16
605 × 660 × 745 mm
Weight 215.6 lbs./98 kg (excluding toner containers and waste toner box)
Space Required
(W) × (D)35 × 26
889 × 660 mm
Downloaded From ManualsPrinter.com Manuals 
						

							Appendix
Appendix-3
Copying Performance
Copying Speed (When using the cassette)
25/25 ppm model Black and White copy
11 × 17/A3: 13 sheets/min
8
1/2× 14/B4: 13 sheets/min
11 × 8
1/2/A4: 25 sheets/min
8
1/2× 11/A4R: 17 sheets/min
B5: 25 sheets/min
B5R: 17 sheets/minColor copy
11 × 17/A3: 13 sheets/min
8
1/2× 14/B4: 13 sheets/min
11 × 8
1/2/A4: 25 sheets/min
8
1/2× 11/A4R: 17 sheets/min
B5: 25 sheets/min
B5R: 17 sheets/min
32/25 ppm model Black and White copy
11 × 17/A3: 16 sheets/min
8
1/2× 14/B4: 16 sheets/min
11 × 8
1/2/A4: 32 sheets/min
8
1/2× 11/A4R: 22 sheets/min
B5: 32 sheets/min
B5R: 22 sheets/minColor copy
11 × 17/A3: 13 sheets/min
8
1/2× 14/B4: 13 sheets/min
11 × 8
1/2/A4: 25 sheets/min
8
1/2× 11/A4R: 17 sheets/min
B5: 25 sheets/min
B5R: 17 sheets/min
32/32 ppm model Black and White copy
11 × 17/A3: 16 sheets/min
8
1/2× 14/B4: 16 sheets/min
11 × 8
1/2/A4: 32 sheets/min
8
1/2× 11/A4R: 22 sheets/min
B5: 32 sheets/min
B5R: 22 sheets/minColor copy
11 × 17/A3: 16 sheets/min
8
1/2× 14/B4: 16 sheets/min
11 × 8
1/2/A4: 32 sheets/min
8
1/2× 11/A4R: 22 sheets/min
B5: 32 sheets/min
B5R: 22 sheets/min
40/35 ppm model Black and White copy
11 × 17/A3: 20 sheets/min
8
1/2× 14/B4: 20 sheets/min
11 × 8
1/2/A4: 40 sheets/min
8
1/2× 11/A4R: 28 sheets/min
B5: 40 sheets/min
B5R: 28 sheets/minColor copy
11 × 17/A3: 18 sheets/min
8
1/2× 14/B4: 18 sheets/min
11 × 8
1/2/A4: 35 sheets/min
8
1/2× 11/A4R: 25 sheets/min
B5: 35 sheets/min
B5R: 25 sheets/min
First Copy Time
25/25 ppm model
32/25 ppm model
32/32 ppm modelB/W: 5.9 seconds or less (1:1, 11 × 8
1/2/A4)
Full color - Single color: 7.9 seconds or less (1:1, 11 × 8
1/2/A4)
40/35 ppm model B/W: 5.3 seconds or less (1:1, 11 × 8
1/2/A4)
Full color - Single color: 7.5 seconds or less (1:1, 11 × 8
1/2/A4)
Resolution Scanning: 600 × 600 dpi
Printing: 600 × 600 dpi
Continuous Copying 1 - 999 sheets
Zoom Level Any level of zoom from 25 - 400 % (in 1 % increments)
includes preset zoom levels
Downloaded From ManualsPrinter.com Manuals 
						

							Appendix
Appendix-4
Printing Performance
Scanning Performance
Printing Speed Same as Copying Speed (When using the cassette)
First Print Time  Same as First Copy Time
Resolution  600 dpi (2/4 bit)
Supported Operating 
SystemsWindows 95 OSR2, Windows 98 Second Edition, 
Windows NT 4.0 Service Pack 5 or later, 
Windows 2000 Service Pack 2 or later, Windows Me, Windows XP, 
Windows Server 2003, Apple Macintosh OS 9.x/OS X 10.x
Interface Parallel port interface: 1 IEEE1284
Network interface: 1
USB: 1 Hi-Speed USB
Network interface cards (option): 1
Serial interface (option): 1
Hardware IBM PC/AT Compatible
Supported Operating 
SystemsWindows 95 OSR2, Windows 98 Second Edition, 
Windows NT 4.0 Service Pack 5 or later, 
Windows 2000 Service Pack 2 or later, Windows Me, Windows XP, 
Windows Server 2003, Mac OS 9.1-9.2.2, Mac OS 10.1.5-10.4 
(TWAIN: Mac OS 10.2-10.4)
Operating Environment CPU Pentium 133 MHz or higher (Windows Me 150 MHz or 
higher, Windows XP Celeron 600 MHz or higher, 
Macintosh PowerPC G3 or higher)
RAM 64 MB or greater (Windows XP 128 MB)
HDD 20 MB or greater
Recommended 
EnvironmentCPU Celeron 266 MHz or higher (Windows XP Celeron 
800 MHz or higher)
RAM 64 MB or greater
HDD 300 MB or greater
CD-ROM 1 drive
Ethernet 10BASE-T/100BASE-TX
Network Protocol TCP/IP
Communications Protocols Proprietary (image transferring, setting via utility), SMTP (e-mail 
sending), HTTP (setting via web), FTP (When sending FTP), TWAIN 
(When using TWAIN)
Downloaded From ManualsPrinter.com Manuals 
						

							Appendix
Appendix-5
Document Processor (option)
Paper Feeder (option)
3000 Sheet Paper Feeder (option)
Original Feed Method Automatic feed
Supported Original Types Sheet originals
Paper Size Maximum: 11 × 17/A3
Minimum: 5
1/2×81/2/A5R
Paper Weight 1-sided original: 45 - 160 g/m
2
2-sided original: 50 - 120 g/m2
Original No. of Sheets 11 × 81/2/A4 or smaller: 100 sheets or less 50 - 80 g/m2
81/2× 14/B4 or larger: 70 sheets or less 50 - 80 g/m2
Device Dimensions
(W) × (D) × (H)221/2×193/16×51/4
571 × 488 × 134 mm
Weight Approx. 25.3 lbs./Approx. 11.5 kg
Paper Supply Method Friction Feed (No. Sheets: 500, 80 g/m2, 2 cassettes)
Paper Size 11 × 17, 8
1/2×14, 11×81/2, 81/2× 11, 101/2×71/4, 71/4×101/2, 
5
1/2×81/2, 81/2×13, 81/2×131/2, A3, B4, A4, A4R, B5, B5R, A5R, 
Folio, 8K, 16K, 16KR
Supported Paper Paper weight: 60 - 105 g/m
2
Paper types: standard, recycled, color 
Dimensions
(W) × (D) × (H)23
5/16×231/4×123/8
585 × 590 × 315 mm
Weight Approx. 57.2 lbs. / Approx. 26 kg
Paper Supply Method Friction retard method (No. sheets: 3000, 80 g/m2)
Paper Size 11 × 8
1/2, A4
Supported Paper Paper weight: 60 - 105 g/m
2
Paper types: standard, recycled, color 
Dimensions
(W) × (D) × (H)23
5/16×235/8×123/8
585 × 600 × 314 mm
Weight Approx. 50.6 lbs. / Approx. 23 kg
Downloaded From ManualsPrinter.com Manuals 
						

							Appendix
Appendix-6
Document Finisher (option)
NOTE: When using the document finisher or 3000 sheet document finisher, the optional job 
separator must be installed.
Only paper that can be fed from the cassette can be ejected from the document finisher or 3000 
sheet document finisher.
3000 Sheet Document Finisher (option)
NOTE: When using the document finisher or 3000 sheet document finisher, the optional job 
separator must be installed.
Only paper that can be fed from the cassette can be ejected from the document finisher or 3000 
sheet document finisher. Number of Trays 1 tray
Paper Size
(Non-stapling)11 × 17, 8
1/2× 14, A3, B4: 500sheets
11 × 8
1/2, 81/2× 11, A4, A4R, B5, B5R, Folio: 1000 sheets
Supported Paper 
WeightStapling: 80 g/m
2 or less
Maximum Sheets for 
Stap l in g
†
† When using color copy paper, stapling up to the number of allowed sheets may not be 
possible due to paper quality. 11 × 17, 8
1/2× 14, A3, B4: 20 sheets, 11 × 81/2, 81/2× 11, A4, A4R, 
B5: 30 sheets (Paper weight 80 g/m2 or less)
Dimensions
(W) × (D) × (H)22 × 20
11 / 1 6×361/16
558 × 526 × 916 mm
Weight Approx. 55 lbs./Approx. 25 kg
Number of Trays 3 tray
Paper Size
Tray A (Non-stapling)
Tray B
Tray C11 × 17, 8
1/2× 14 A3, B4, 8K: 1500 sheets
11 × 8
1/2, 81/2× 11, A4, A4R, B5, Folio, 16K: 3000 sheets
11 × 17, 8
1/2× 14 A3, B4, 8K: 100 sheets
11 × 8
1/2, 81/2×11, 51/2×81/2, A4, A4R, B5, B5R, A5, A5R, B6R, A6R, 
Folio, 16K, 16KR: 200 sheets
Postcard: 50 sheets
11 × 8
1/2, 51/2×81/2, A4, B5, A5, A5R, B6R, A6R, 16K: 50 sheets
Postcard: 10 sheets
Supported Paper 
WeightStapling: 90 g/m
2 or less
Punchingoption: 45 - 200 g/m
2
Maximum Sheets for 
Stap l in g†
† When using color copy paper, stapling up to the number of allowed sheets may not be 
possible due to paper quality. 11 × 17, 8
1/2× 14, A3, B4: 30 sheets, 11 × 81/2, 81/2× 11, A4, A4R, 
B5: 50 sheets (Paper weight 90 g/m2 or less)
Dimensions
(W) × (D) × (H)26 
15/16×223/16×4213/16
684 × 563 × 1087 mm
Weight Approx. 105.6 lbs. or less/Approx. 48 kg or less
Downloaded From ManualsPrinter.com Manuals