Kyocera KM 1650 User Manual

							Printer Settings 
ADVANCED OPERATION GUIDE 2-53
Stapling Error Detection
You can select whether or not to display Add Staples and Press GO when 
staples have run out while stapling is performed.
NOTE: This setting is displayed only if the optional Finisher is installed.
1Display the Others screen, refer to Access the Others Screen, on page 2-
48.
2Press S or T to select Finishing 
Error and press [Enter].
3Press S or T to select Staple 
Setting and press [Enter].
4Press S or T to select On or Off 
and press [Enter].
5Press [Reset]. The Printer Basic screen displays. Setting Processing
OnIf you select GO, printing is performed without stapling.
If you select CANCEL, printing is canceled.
OffPrinting is performed without stapling.
Fi ni shi ng  Erro r Auto  Co ntinue
Reso u rc e P ro t. Others
Finishi ng  Erro r
Back
P ro c es.  Du p l ex p ri n t
Staple Setting
Staple Setting
Back
On
Off
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Settings 
2-54 ADVANCED OPERATION GUIDE
Printing a Service Status Page
The Service Status Page contains more detailed printer setting information 
than the Status Page. This page is mainly used by service personnel for 
maintenance. Use the following procedure to print this page if required.
1Display the Others screen, refer to Access the Others Screen, on page 2-
48.
2Press S or T to select Service 
and press [Enter].
3Press S or T to select Print 
Status Page and press [Enter].
4Press S or T to select Print and 
press [Enter]. The Service Status 
page is printed.
5Press [Reset]. The Printer Basic screen displays.
Service Auto  Co ntinue Others
Fi ni shi ng  Erro r
Service
Back
Print Status Page
P ap er Feed
Print Status Page
No
Print
Downloaded From ManualsPrinter.com Manuals 
						

							ADVANCED OPERATION GUIDE 3-1
3 System Settings
This chapter explains the system settings available on the 
machine.
• Copy Default Settings................................................... 3-2
• Machine Default Settings ........................................... 3-14
• Viewing and Printing the Total Counter ...................... 3-28
• Report Output ............................................................. 3-30
• Language Setting ....................................................... 3-32
• User Adjustment ......................................................... 3-33
Downloaded From ManualsPrinter.com Manuals 
						

							System Settings 
3-2 ADVANCED OPERATION GUIDE
Copy Default Settings
Initial Mode is the state the machine enters after warm-up or if Reset is 
pressed. If no operations are performed for a preset period of time, the 
machine returns to initial mode. Any settings that have been selected will 
be cleared. 
In the factory default setting, paper of the same size as the original is 
selected automatically (Auto Paper Selection mode), the copy 
magnification ratio is set to 100 %, the number of copies to be made is set 
to 1 and the Image Quality is set to Te x t + P h o t o  mode.
Use these instructions to customize the settings to meet your 
requirements.
The following settings are available:
• Exposure Mode
• Original Image Quality
• EcoPrint Mode
• Background Color Adjustment
• Paper Selection
• Paper Type in Auto Paper Selection
• Priority Cassette
• Default Magnification
• Auto Exposure Adjustment
• Auto OCR Exposure Adjustment
• Exposure Adjustment for Text + Photo Originals
• Exposure Adjustment for Text Originals
• Exposure Adjustment for Photo Originals
• Sort Copying
• Offset Copying
• Auto Rotation Copy
• Margin Width Default Value
• Border Erase Width Default Value
• Number of Copies Limit
• Black Streaking Reduction Processing
Downloaded From ManualsPrinter.com Manuals 
						

							System Settings 
ADVANCED OPERATION GUIDE 3-3
Access the Copy Default Screen
Use the following procedure to access the Copy Default screen.
1Press [System Menu / Counter].
2Press S or T to select Copy 
default and press [Enter].
3Use the keypad to enter the 4 digit 
management code. 
NOTE: The factory default management code varies for each model:
16 ppm model = 1600, 20 ppm model = 2000, and 25 ppm model = 2500.
The four-digit management code can be changed. For further information 
refer to Administrator Management Code Change, on page 3-25.
If the code is accepted, the Copy 
Default screen displays.
4Change the options to the default settings required using the instructions 
starting on page 3-4.
NOTE: An * (asterisk) against a setting indicates the current setting.
Print Report
Job Accounting
System Menu / Counter:
Co py Default
Enter Pin Code using # key.
End
Exposure Mode
Copy Default:
Orig Quality
Manual :
:Text+Photo
Downloaded From ManualsPrinter.com Manuals 
						

							System Settings 
3-4 ADVANCED OPERATION GUIDE
Exposure Mode
Set the default Exposure mode to Auto or Manual.
1Display the Copy Default screen, refer to Access the Copy Default Screen, 
on page 3-3.
2Press S or T to select Exposure 
Mode and press [Enter].
3Press S or T to select Auto or 
Manual as the default setting and 
press [Enter].
4Press [Reset]. The Copier Basic screen returns.
Original Image Quality
Use to set the default Original Image Quality mode.
1Display the Copy Default screen, refer to Access the Copy Default Screen, 
on page 3-3.
2Press S or T to select Orig 
Quality and press [Enter].
3Press S or T to select 
Text+Photo, Text or Photo as the 
default setting and press [Enter].
4Press [Reset]. The Copier Basic screen returns.
EcoPrint Mode
Use to select EcoPrint mode as the default setting.
1Display the Copy Default screen, refer to Access the Copy Default Screen, 
on page 3-3.
2Press S or T to select EcoPrint 
and press [Enter].
End
Exposure Mode
Copy Default:
Orig Quality
Manual :
:Text+Photo
Exposure Mode:
Auto
Manu al*
End
Exposure Mode
Copy Default:
Orig Quality
Manual :
:T e x t + P h o t o
O ri g in al  Imag e Q u al ity:
Text+Photo
Text*
Photo
Exposure Mode
Orig Quality
Copy Default:
EcoPrintOff :
:Manual :
Text+Photo
Downloaded From ManualsPrinter.com Manuals 
						

							System Settings 
ADVANCED OPERATION GUIDE 3-5
3Press S or T to select On to 
enable Ecoprint Mode as the 
default. If you do not wish to use 
EcoPrint Mode as the default, 
select Off. Press [Enter].
4Press [Reset]. The Copier Basic screen returns.
Background Color Adjustment
If the Background Color is too dark or light, use this option to adjust it.
1Display the Copy Default screen, refer to Access the Copy Default Screen, 
on page 3-3.
2Press S or T to select 
Background adjst and press 
[Enter].
3Press < or > to adjust the 
background color to the required 
default. Move right to darken the 
background color, or left to lighten 
the background color. Press 
[Enter].
4Press [Reset]. The Copier Basic screen returns.
Paper Selection
Use to automatically select the cassette that contains the same size paper 
as the original, or to have a fixed cassette with priority.
1Display the Copy Default screen, refer to Access the Copy Default Screen, 
on page 3-3.
2Press S or T to select Paper 
Select and press [Enter].
3Press S or T to select Auto or 
Default cassette and press 
[Enter].
4Press [Reset]. The Copier Basic screen returns.
EcoPrint:
Off
On*
Orig Quality
EcoPrint
Copy Default:
Background Adjst
Off :
:Text+Photo
:
3
Background Adjustment:
45 3
12*
EcoPrint
Background Adjst
Copy Default:
Paper Select
Off
: :
Auto 3 :
Paper Select:
Auto
Default Cassette*
Downloaded From ManualsPrinter.com Manuals 
						

							System Settings 
3-6 ADVANCED OPERATION GUIDE
Paper Type in Auto Paper Selection
Paper selected in Auto Paper Selection mode can be limited to a certain 
paper type.
Paper types that can be set: Plain, Transparency, Preprinted, Labels, 
Bond, Recycled, Vellum, Rough, Letterhead, Color, Prepunched, 
Envelope, Cardstock, Thick paper, High quality, and Custom 1 (to 8)
NOTE: You can select a paper type from the paper types that are 
currently set for the cassettes, refer to Paper Type (cassettes 1 to 4), on 
page 3-17.
1Display the Copy Default screen, refer to Access the Copy Default Screen, 
on page 3-3.
2Press S or T to select Paper type 
(Auto) and press [Enter].
3Press S or T to select Off or On 
and press [Enter].
4If you have selected On, press S 
or T to select the paper type 
required and press [Enter].
5Press [Reset]. The Copier Basic screen returns.
Background Adjst
Paper Select
Copy Default:
Paper Type(Auto)Plain :
:Auto 3 :
Paper Type(Auto):
Off
On*
Plain
Paper Type(Auto):
P rep ri n ted
Downloaded From ManualsPrinter.com Manuals 
						

							System Settings 
ADVANCED OPERATION GUIDE 3-7
Priority Cassette
You can select the cassette (1 to 4) that is automatically selected with 
priority.
NOTE: For the 16 ppm model, cassettes 2 to 4 are included in the 
optional Paper Feeder. For the 20 and 25 ppm models, cassettes 3 and 4 
are included in the optional Paper Feeder. This setting displays only if the 
optional Paper Feeder is installed.
IMPORTANT: You cannot set the Multi-Bypass Tray as the priority 
cassette.
1Display the Copy Default screen, refer to Access the Copy Default Screen, 
on page 3-3.
2Press S or T to select Default 
Cassette and press [Enter].
3Press S or T to select the priority 
cassette and press [Enter].
4Press [Reset]. The Copier Basic screen returns.
Default Magnification
Select whether or not to set the Auto Zoom Ratio selection mode when a 
cassette is selected.
1Display the Copy Default screen, refer to Access the Copy Default Screen, 
on page 3-3.
2Press S or T to select Default 
Magnif and press [Enter].
3Press S or T to select 100% or 
Auto % and press [Enter].
4Press [Reset]. The Copier Basic screen returns.
Paper Select
Paper Type(Auto)
Copy Default:
Defau l t Cassette
Plain :
:Auto
Casset. 1 :
Default Cassette:
Cassette 1
Cassette 2*
Cassette 3
Paper Type(Auto)
Defau l t Cassette
Copy Default:
Default Magnif.
Plain
: :
100% Casset. 1 :
Default Magnification:
100%
Auto  %*
Downloaded From ManualsPrinter.com Manuals 
						

							System Settings 
3-8 ADVANCED OPERATION GUIDE
Auto Exposure Adjustment
Adjusts the overall density in Auto Exposure mode.
1Display the Copy Default screen, refer to Access the Copy Default Screen, 
on page 3-3.
2Press S or T to select Adj.Auto 
expos and press [Enter].
3Press < or > to adjust the 
exposure. Move right to darken 
the density, or left to lighten it and 
press [Enter].
4Press [Reset]. The Copier Basic screen returns.
Auto OCR Exposure Adjustment
Adjusts the overall density of scanning for OCR when using the optional 
Scanner functions.
1Display the Copy Default screen, refer to Access the Copy Default Screen, 
on page 3-3.
2Press S or T to select Auto 
expos.(OCR) and press [Enter].
3Press < or > to adjust the 
exposure. Move right to darken 
the density, or left to lighten it and 
press [Enter].
4Press [Reset]. The Copier Basic screen returns.
Defau l t Cassette
Copy Default:
Default Magnif.
Adj.  Auto  expo s.4 :
:100% Casset. 1 :
Ad ju st au to  exp o su re:
Copy Default:
Default Magnif.
Adj.  Auto  expo s.
Auto  expo s. ( O CR)
4 :
:100%
4 :
Ad just Auto  O CR Densi ty:
Downloaded From ManualsPrinter.com Manuals