Kyocera KM 1650 User Manual

							System Settings 
ADVANCED OPERATION GUIDE 3-9
Exposure Adjustment for Text + Photo Originals
Adjusts the density of the central value in Manual Exposure mode for Text 
+ Photo originals.
1Display the Copy Default screen, refer to Access the Copy Default Screen, 
on page 3-3.
2Press S or T to select Txt+Photo 
Dens and press [Enter].
3Press < or > to adjust the 
exposure. Move right to darken 
the density, or left to lighten it and 
press [Enter].
4Press [Reset]. The Copier Basic screen returns.
Exposure Adjustment for Text Originals
Adjusts the density of the central value in Manual Exposure mode for Text 
originals.
1Display the Copy Default screen, refer to Access the Copy Default Screen, 
on page 3-3.
2Press S or T to select Txt Ori 
Density and press [Enter].
3Press < or > to adjust the 
exposure. Move right to darken 
the density, or left to lighten it and 
press [Enter].
4Press [Reset]. The Copier Basic screen returns.
Default Magnif.
Adj.  Auto  expo s.
Txt+Photo Dens.
Copy Default:
4 :
:100%
4 :
Text+Photo Orig. Dens. Adj.:
Auto  expo s. ( O CR)
Txt+Photo Dens.
Txt Ori Density
Copy Default:
4 :4 :4 :
Text Original Density Adjust:
Downloaded From ManualsPrinter.com Manuals 
						

							System Settings 
3-10 ADVANCED OPERATION GUIDE
Exposure Adjustment for Photo Originals
Adjusts the density of the central value in Manual Exposure mode for 
Photo originals.
1Display the Copy Default screen, refer to Access the Copy Default Screen, 
on page 3-3.
2Press S or T to select Photo Ori 
Dnsity and press [Enter].
3Press < or > to adjust the 
exposure. Move right to darken 
the density, or left to lighten it and 
press [Enter].
4Press [Reset]. The Copier Basic screen returns.
Sort Copying
If the optional Document Processor is installed, select whether or not to set 
the Sort Copy mode as a default setting.
NOTE: This item is displayed only if the optional Document Processor is 
installed.
1Display the Copy Default screen, refer to Access the Copy Default Screen, 
on page 3-3.
2Press S or T to select Sort and 
press [Enter].
3Press S or T to select On or Off 
and press [Enter].
4Press [Reset]. The Copier Basic screen returns.
Txt+Photo Dens.
Photo Ori Dnsity
Txt Ori Density Copy Default:
4 :4 :4 :
Photo Original Density Adjust:
Sort
Copy Default:
On :4 :4 :
Photo Ori Dnsity Txt Ori Density
Sort:
Off
On*
Downloaded From ManualsPrinter.com Manuals 
						

							System Settings 
ADVANCED OPERATION GUIDE 3-11
Offset Copying
Use to set Offset Copy mode as the default setting.
1Display the Copy Default screen, refer to Access the Copy Default Screen, 
on page 3-3.
2Press S or T to select Offset and 
press [Enter].
3Press S or T to select On or Off 
and press [Enter].
4Press [Reset]. The Copier Basic screen returns.
Auto Rotation Copy
Use to select Auto Rotation Copy mode as the default setting.
1Display the Copy Default screen, refer to Access the Copy Default Screen, 
on page 3-3.
2Press S or T to select Auto 
Rotation and press [Enter].
3Press S or T to select On or Off 
and press [Enter].
4Press [Reset]. The Copier Basic screen returns.
Margin Width Default Value
Use to set the default value of Margin Width.
1Display the Copy Default screen, refer to Access the Copy Default Screen, 
on page 3-3.
2Press S or T to select Margin 
Width and press [Enter].
Copy Default:
Offset
Sort On:
４: Photo Ori Dnsity
Off :
Offset:
Off
On*
Auto Rotation Copy Default:
Offset Sort On
Off :
:
On :
Auto Rotation:
Off
On*
Marg in Wid th Auto Rotation
Offset Off:
1/4 : Copy Default:
On :
Downloaded From ManualsPrinter.com Manuals 
						

							System Settings 
3-12 ADVANCED OPERATION GUIDE
3Press S or T to select the default 
margin width. You can select from 
1/8 to 3/4 in 1/8 increments [1 
mm to 18 mm in 1 mm 
increments] and press [Enter].
4Press [Reset]. The Copier Basic screen returns.
Border Erase Width Default Value
Use to set the default value for the Border Erase Width.
1Display the Copy Default screen, refer to Access the Copy Default Screen, 
on page 3-3.
2Press S or T to select Border 
Erase Width and press [Enter].
3Press S or T to select the default 
Border Erase width. You can 
select from 1/8 to 3/4 in 1/8 
increments (1 mm to 18 mm in 1 
mm increments) and press 
[Enter].
4Press [Reset]. The Copier Basic screen returns.
Number of Copies Limit
Use to set the limit for the number of copies that can be selected at a time.
1Display the Copy Default screen, refer to Access the Copy Default Screen, 
on page 3-3.
2Press S or T to select Copy Limit 
and press [Enter].
3Use the numeric keys to enter the 
maximum number of copies (1 to 
999) and press [Enter].
4Press [Reset]. The Copier Basic screen returns.
1/8
Marg i n  Wi d th :
1/43/4
Bo rd erEraseWi d th Marg in Wid th
Auto Rotation
1/4 : Copy Default:
On :
1/4 :
1/8
Bo rder Erase Wi dth :
1/43/4
Co py Limit Bo rd erEraseWi d th
Marg in Wid th 1 / 4 : Copy Default:
1/4 :
999 :Set
Sets
Co p y Li mi t:
999
# ke
ys
Downloaded From ManualsPrinter.com Manuals 
						

							System Settings 
ADVANCED OPERATION GUIDE 3-13
Black Streaking Reduction Processing
If black streaks (streaks that are not contained in the original image) 
appear on copies from the optional Document Processor, you can make 
black streaking less noticeable. Black Streaking Reduction processing 
reduces the reproducibility of fine characters, therefore it is recommended 
to use the factory default setting.
To use the Black Streaking Reduction processing, first select Weak. If 
black streaking is not reduced, select Strong 
1Display the Copy Default screen, refer to Access the Copy Default Screen, 
on page 3-3.
2Press S or T to select Corr. 
Black line and press [Enter].
3Press S or T to select None, 
Weak or Strong and press 
[Enter].
4Press [Reset]. The Copier Basic screen returns.
Corr. Black Line Co py Limit
Bo rd erEraseWi d th Copy Default:
1/4 :
999 :Set
None :
Correct. Fine black line:
None
Weak*
Strong
Downloaded From ManualsPrinter.com Manuals 
						

							System Settings 
3-14 ADVANCED OPERATION GUIDE
Machine Default Settings
The machine enters Initial Mode after warm-up or if Reset is pressed. The 
options and settings which the machine returns to in Initial Mode are the 
default settings.
Use these instructions to customize the default settings to meet your 
requirements.
The following settings are available:
• Auto Cassette Switching
• Paper Size (cassettes 1 to 4)
• Paper Type (cassettes 1 to 4)
• Multi-Bypass Tray Confirmation Display
• Paper Weight for Paper Type
• Duplex Print for Paper Type
• Custom Paper Type
• Original Orientation
• Auto Sleep Time
• Auto Low Power Time
• Copy Output Destination
• Fax Output Destination
• Default Operation Mode
• Key Sound
• Date and Time
• Display Contrast Adjustment
• Administrator Management Code Change
• Auto Sleep
• Auto Clear
• Auto Clear Time
• Silent Mode
Downloaded From ManualsPrinter.com Manuals 
						

							System Settings 
ADVANCED OPERATION GUIDE 3-15
Access the Machine Default Screen
Use the following procedure to access the Machine Default screen.
1Press [System Menu / Counter].
2Press S or T to select Machine 
default and press [Enter].
3Use the keypad to enter the 4 digit 
management code. 
NOTE: The factory default management code varies for each model:
16 ppm model = 1600, 20 ppm model = 2000, and 25 ppm model = 2500.
The four-digit management code can be changed. For further information 
refer to Administrator Management Code Change, on page 3-25.
If the code is accepted, the 
Machine Default screen displays.
4Change the options to the default settings required using the instructions 
starting on page 3-4.
NOTE: An * (asterisk) against a setting indicates the current setting.
Job Accounting
System Menu / Counter:
Co py Default
Mac hine Defaul t
Enter Pin Code using # key.
End
Auto Cassette SW
Mac h i n e Defau l t:
Paper Size(1st)
On
Auto  I :
:
Downloaded From ManualsPrinter.com Manuals 
						

							System Settings 
3-16 ADVANCED OPERATION GUIDE
Auto Cassette Switching
If multiple cassettes contain the same size paper and the paper in one 
cassette runs out during copying, the Automatic Cassette Switching 
function will switch paper feed from the empty cassette to another cassette 
containing paper of the same size and orientation.
To prohibit switching to a cassette that has a different paper type, select 
On/Only Same Paper Type.
NOTE: To use this function on the 16 ppm model, the Optional Paper 
Feeder must be installed.
1Display the Machine default screen, refer to Access the Machine Default 
Screen, on page 3-15.
2Press S or T to select Auto 
Cassette SW and press [Enter].
3Press S or T to select On/All 
types of paper, On/Only same 
paper type, or Off and press 
[Enter].
4Press [Reset]. The Copier Basic screen returns.
Paper Size (cassettes 1 to 4)
Use to set the paper sizes for cassettes 1 to 4. To detect the paper size 
automatically, set to Auto Detection Metric or Auto Detection Inch.
NOTE: For the 16 ppm model, cassettes 2 to 4 are included in the 
optional paper feeder. For the 20 and 25 ppm model, cassettes 3 and 4 
are included in the optional Paper Feeder. This setting is displayed only if 
the optional Paper Feeder is installed.
1Display the Machine default screen, refer to Access the Machine Default 
Screen, on page 3-15.
2A Paper Size option is available 
for each cassette. Press S or T 
to select the Paper Size option 
required, and press [Enter].
3Press S or T to select Auto 
Detection Metric, Auto Detection 
Inch or a paper size and press 
[Enter].
End
Auto Cassette SW
Mac h i n e Defau l t:
Paper Size(1st)
On
Auto  I :
:
Automatic Cassette Switching:
Off
On/All types of paper*
On/Only same paper type
End
Auto Cassette SW Mac h i n e Defau l t:
Paper Size(1st)On
Auto  I :
:
P ap er S i ze ( 1 st c assette) :
Auto Detection Metric
Auto Detection Inch*
Downloaded From ManualsPrinter.com Manuals 
						

							System Settings 
ADVANCED OPERATION GUIDE 3-17
4Press [Reset]. The Copier Basic screen returns.
Paper Type (cassettes 1 to 4)
Use to set the paper types for cassettes 1 to 4.
Paper types that can be set: Plain, Preprinted, Bond, Recycled, Rough, 
Letterhead, Color, Prepunched, High quality and Custom 1 to 8.
NOTE: For the 16 ppm model, cassettes 2 to 4 are included in the 
optional paper feeder. For the 20 and 25 ppm model, cassettes 3 and 4 
are included in the optional Paper Feeder. This setting is displayed only if 
the optional Paper Feeder is installed.
1Display the Machine default screen, refer to Access the Machine Default 
Screen, on page 3-15.
2A Paper Type option is available 
for each cassette. Press S or T 
to select the Paper Type option 
required and press [Enter].
3Press S or T to select the paper 
type and press [Enter].
4Press [Reset]. The Copier Basic screen returns.
Multi-Bypass Tray Confirmation Display
Use to select to display the Bypass Paper Size screen when pressing the 
Paper Select key to select the Multi-Bypass Tray.
1Display the Machine default screen, refer to Access the Machine Default 
Screen, on page 3-15.
2Press S or T to select Check 
Bypass and press [Enter].
3Press S or T to select On or Off 
and press [Enter].
4Press [Reset]. The Copier Basic screen returns.
Mac h i n e Defau l t:
Paper Type(1st)Plain : P ap er Si ze( 3 rd ) Auto  I:
Paper Size(4th) Auto I:
P ap er Typ e ( 1 st c assette) :
Plain
P rep ri n ted
*
Bond
Mac h i n e Defau l t:
Chec k BypassOff : Paper Type(3rd) Plain:
Paper Type(4th) Plain:
Chec k Bypass Sizing :
Off
On*
Downloaded From ManualsPrinter.com Manuals 
						

							System Settings 
3-18 ADVANCED OPERATION GUIDE
Paper Weight for Paper Type
Use to set the Paper Weight for each Paper Type.
Paper weight types that can be set: Super-Heavy, Heavy3, Heavy2, 
Heavy1, Middle3, Middle2, Middle1 and Light.
1Display the Machine default screen, refer to Access the Machine Default 
Screen, on page 3-15.
2Press S or T to select P.type 
(Weight) and press [Enter].
3Press S or T to select the paper 
type and press [Enter].
4Press S or T to select the paper 
weight and press [Enter].
Repeat the procedure to set the 
weight for each paper type.
5When you have finished changing 
the settings, press S or T to 
select End and press [Enter].
6Press [Reset]. The Copier Basic screen returns.
Duplex Print for Paper Type
Use to set the use of custom paper (1 to 8) for duplex printing.
1Display the Machine default screen, refer to Access the Machine Default 
Screen, on page 3-15.
2Press S or T to select P.type 
(Duplex) and press [Enter].
3Press S or T to select the paper 
type and press [Enter].
: :
P. Type (Weight)
Mac h i n e Defau l t:
Chec k Bypass O ff: Paper Type(4th) Plain:
Paper type (Paper Weight):
Tran sp aren c yS. Heavy : End
Plain Middle 2:
Plain:
Heavy 1
Middle 3
*
Middle 2
Tran sp aren c y: End
Plain Middle 2: Paper type (Paper Weight):
S. Heavy
Mac h i n e Defau l t:
Chec k Bypass
P. Type (Weight)
P. Type (2sided)
Off :
Select paper type(2sided):
Custo m 2On : End
Custo m 1 O n:
Downloaded From ManualsPrinter.com Manuals