Kyocera KM 1650 User Manual

							System Settings 
ADVANCED OPERATION GUIDE 3-19
4Press S or T to select On or Off 
and press [Enter].
5When you have finished changing 
the settings, press S or T to 
select End and press [Enter].
6Press [Reset]. The Copier Basic screen returns.
Custom Paper Type
Printing onto prepunched paper, preprinted paper or letterhead in one-
sided mode and two-sided mode from the same paper source may cause 
displacement of hole positions, or reverse orientations on both sides. Set 
Match Print Direction to match the orientation in one-sided printing and 
two-sided printing.
Example: Paper is set as shown in the illustration.
NOTE: Setting of Match Print Direction will decrease the speed of one-
sided printing slightly.
When Match Print Direction is set, load the paper with the side for the first 
page face-down as shown in illustration A. If the optional Finisher is 
installed, load the paper with the side for the first page face-down as shown 
in illustration B.
If the optional Finisher is installed, the stapling mode may cause incorrect 
orientation of printing depending on the stapling position.
Cu sto m 1 :
Off
On*
Select paper type(2sided):
Custo m 2On : End
Custo m 1 O n:
Setting One-sided printing Two-sided printing
Match Print Direction
Fast Mode
AB
Downloaded From ManualsPrinter.com Manuals 
						

							System Settings 
3-20 ADVANCED OPERATION GUIDE
1Display the Machine default screen, refer to Access the Machine Default 
Screen, on page 3-15.
2Press S or T to select Special P. 
type and press [Enter].
3Press S or T to select Match 
Print Direction or Fast Mode and 
press [Enter].
4Press [Reset]. The Copier Basic screen returns.
Original Orientation
Use to set the default Original Orientation.
1Display the Machine default screen, refer to Access the Machine Default 
Screen, on page 3-15.
2Press S or T to select Orig. 
direction and press [Enter].
3Press S or T to select Rear or 
Left top and press [Enter].
4Press [Reset]. The Copier Basic screen returns.
Auto Sleep Time
Use to set the time that elapses before the Auto Sleep function is activated 
if the function has been enabled.
Time that can be set:
• Inch Specification — 1 to 240 minutes (in 1 minute increments)
• Metric Specification — 1 to 120 minutes (in 1 minute increments)
NOTE: It is recommended to set a longer time if you use the machine 
frequently.
1Display the Machine default screen, refer to Access the Machine Default 
Screen, on page 3-15.
Mac h i n e Defau l t:
Specific P. Type P. Type (Weight)
P. Type (2sided)Fast Mo d e :
Specific Paper Type:
Match Print Direction
Fast Mo d e*
Orig. DirectionRear : Mac h i n e Defau l t:
P. Type (2sided)
Specific P. Type Fast Mode:
Orig. Direction:
Rear
Left top*
Downloaded From ManualsPrinter.com Manuals 
						

							System Settings 
ADVANCED OPERATION GUIDE 3-21
2Press S or T to select Sleep 
mode time and press [Enter].
3Press < or > to select the time 
required from 1 to 240 minutes or 
1 to 120 minutes and press 
[Enter].
4Press [Reset]. The Copier Basic screen returns.
Auto Low Power Time
Use to set the time that elapses before Low Power mode is automatically 
activated.
Time that can be set:
• Inch Specification — 1 to 240 minutes (in 1 minute increments)
• Metric Specification — 1 to 120 minutes (in 1 minute increments) 
1Display the Machine default screen, refer to Access the Machine Default 
Screen, on page 3-15.
2Press S or T to select Low power 
time and press [Enter].
3Press < or > to select the time 
required from 1 to 240 minutes or 
1 to 120 minutes and press 
[Enter].
4Press [Reset]. The Copier Basic screen returns.
Copy Output Destination
Use to set the paper output destination with priority for copying.
Mac h i n e Defau l t:
S l eep  Mo d e Ti me Orig. Direction:
Rear :
30 : Specific P. Type Fast Mode
Mi n .
1-240
Sl eep  Mo de Time:
Min.30Min.
Mac h i n e Defau l t:
Orig. Direction Rear:
:
Low Power Time : S l eep  Mo d e Ti me 3 0 Mi n.
15Min.
Low Power Mode Time:
1-240Min.15Min.
Setting Item Output Destination
Top TrayMain body output tray
FinisherOptional Finisher
Job SeparatorOptional Job Separator
Downloaded From ManualsPrinter.com Manuals 
						

							System Settings 
3-22 ADVANCED OPERATION GUIDE
NOTE: This item is displayed only if the optional Finisher or Job 
Separator is installed.
1Display the Machine default screen, refer to Access the Machine Default 
Screen, on page 3-15.
2Press S or T to select Copy 
Otput Destn and press [Enter].
3Press S or T to select the output 
destination required and press 
[Enter].
4Press [Reset]. The Copier Basic screen returns.
Fax Output Destination
Use to set the paper output destination with priority for received fax data 
and various reports.
NOTE: This item is displayed only if the optional Fax kit and Finisher or 
Job Separator are installed.
1Display the Machine default screen, refer to Access the Machine Default 
Screen, on page 3-15.
2Press S or T to select Fax 
Output Destn and press [Enter].
3Press S or T to select the output 
destination required and press 
[Enter].
4Press [Reset]. The Copier Basic screen returns.
Mac h i n e Defau l t:
Copy Otput Destn Top Tray: :
Low Power Time : S l eep  Mo d e Ti me 3 0 Mi n .
15Min.
Copy Output Destination:
Top Tray
Fini sher*
Setting Item Output Destination
Top TrayMain body output tray
FinisherOptional Finisher
Job SeparatorOptional Job Separator
Mac h i n e Defau l t:
Fax O utp ut Destn To p  Tray: Copy Otput Destn Top Tray: Low Power Time : 30Min.
Fax Output Destination:
Top Tray
Fini sher*
Downloaded From ManualsPrinter.com Manuals 
						

							System Settings 
ADVANCED OPERATION GUIDE 3-23
Default Operation Mode
Select the default screen to be displayed when the power is switched on. 
The Copy or Fax screen can be displayed.
NOTE: This item is displayed only if the optional Fax kit is installed.
1Display the Machine default screen, refer to Access the Machine Default 
Screen, on page 3-15.
2Press S or T to select Main 
mode and press [Enter].
3Press S or T to select Copy 
mode or Fax mode and press 
[Enter].
4Press [Reset]. The Copier Basic screen returns.
Key Sound
Use to enable a beep sound each time a key on the Operation Panel is 
pressed.
1Display the Machine default screen, refer to Access the Machine Default 
Screen, on page 3-15.
2Press S or T to select Key sound 
On/Off and press [Enter].
3Press S or T to select Off or On 
and press [Enter].
4Press [Reset]. The Copier Basic screen returns.
Main Mo d e Co p y: Mac h i n e Defau l t:
Fax O utp ut Destn To p  Tray: Copy Otput Destn Top Tray:
Sel ec t the Main Mo d e:
Copy Mode
Fax Mo d e*
Key Sound On/Off On: Mac h i n e Defau l t:
:
Low Power Time : S l eep  Mo d e Ti me 3 0Mi n.
15Min.
Key Sound On/Off:
Off
On*
Downloaded From ManualsPrinter.com Manuals 
						

							System Settings 
3-24 ADVANCED OPERATION GUIDE
Date and Time
Use to register the current date and time, the time difference from 
Greenwich Mean Time (GMT), and the summer time setting.
1Display the Machine default screen, refer to Access the Machine Default 
Screen, on page 3-15.
2Press S or T to select Date/Time 
and press [Enter].
3Press S or T to select Time 
Zone.
Press < or > key to set the time 
difference from Greenwich Mean 
Time.
4Press S or T to select Time.
Press the < key or the > key to set 
the current time.
5Press S or T to select DST 
(Summer time).
Press < or > to set On or Off.
6Press S or T to select Year.
Press < or > to set the current 
year.
7Press S or T to select Month.
Press < or > to set the current 
month.
8Press S or T to select Day.
Press < or > to set the current day.
9When the date and time settings 
have been entered, press S or T 
to select End and press [Enter].
10Press [Reset]. The Copier Basic screen displays.
Date/Time
Key Sound On/Off On: Mac h i n e Defau l t:
Low Power Time : 15Min.
06:33 :
Time Zone
06:33
Off
GMT :
:
: Time Date/ Time:
DST
00:00 +
End
Time
Date/ Time:
DST
06:33
Off:
:
06:33
Off:
: End
Time Date/ Time:
DST
Year
Off
7 :
:
: Time Zone Date/ Time:
DST
GMT 00:00+
Mo nth
7
11 :
:
: Year
Time Zone Date/ Time:
GMT 00:00+
Day
7
11
28 :
:
: Mo nth
Year Date/ Time:
06:33
Off :
: End
Time Date/ Time:
DST
Downloaded From ManualsPrinter.com Manuals 
						

							System Settings 
ADVANCED OPERATION GUIDE 3-25
Display Contrast Adjustment
Use to adjust the Display Contrast if required.
1Display the Machine default screen, refer to Access the Machine Default 
Screen, on page 3-15.
2Press S or T to select Display 
Contrast and press [Enter].
3Press < or > to adjust the contrast. 
Move left to darken the contrast, 
or right to lightens the contrast 
and press [Enter].
4Press [Reset]. The Copier Basic screen returns.
Administrator Management Code Change
You can change the 4-digit Management Code for the machine 
administrator.
IMPORTANT: If you change the Management Code, ensure you note it 
down. If you forget the code, contact your Service Representative.
NOTE: The factory default management code varies for each model:
16 ppm model = 1600, 20 ppm model = 2000, and 25 ppm model = 2500.
1Press S or T to select PIN # 
Change or MGMT Code.
NOTE: If using a metric machine, this option displays as MGMT Code 
entry.
2Use the numeric keys to enter the 
new Administrator Management 
Code and press [Enter].
3Press [Reset]. The Copier Basic screen returns.
On :
08:48 :
Display Co ntrast :
Date/Time Key Sound On/Off Mac h i n e Defau l t:
Di sp l ay Co n trast Ad ju stmen t:
*
08:48 :
:
PIN # Change
Display Co ntrast Date/Time Mac h i n e Defau l t:
Management Code Change:
1600
# keys
Downloaded From ManualsPrinter.com Manuals 
						

							System Settings 
3-26 ADVANCED OPERATION GUIDE
Auto Sleep
Use to set the machine to enter sleep mode automatically when a preset 
period of time of non-use elapses.
NOTE: This setting is displayed only on the inch specification machine.
If the Auto Sleep function causes inconvenience, it is recommended to try 
a longer time period before disabling the function. If you disable this 
function, it is not displayed.
1Display the Machine default screen, refer to Access the Machine Default 
Screen, on page 3-15.
2Press S or T to select Auto 
Sleep and press [Enter].
3Press S or T to select On or Off 
and press [Enter].
4Press [Reset]. The Copier Basic screen returns.
Auto Clear
Using Auto Clear, once a specified amount of time has passed after 
copying stops (between 10 and 270 seconds), the machine returns to the 
current default settings. Copies can be made continually using the same 
settings (e.g. copy mode, number of copies, and exposure mode) if each 
job is started before the Auto Clear function is activated.
1Display the Machine default screen, refer to Access the Machine Default 
Screen, on page 3-15.
2Press S or T to select Auto Clear 
and press [Enter].
3Press S or T to select On or Off 
and press [Enter].
4Press [Reset]. The Copier Basic screen returns.
On : :
Au to  S l eep
Mac h i n e Defau l t:
PIN # Change Display Co ntrast
Auto  S leep :
Off
On*
On :
On : Auto  ClearAu to  S l eep Mac h i n e Defau l t:
PIN # Change
Auto  Clear:
Off
On*
Downloaded From ManualsPrinter.com Manuals 
						

							System Settings 
ADVANCED OPERATION GUIDE 3-27
Auto Clear Time
Use to set the time that elapses from completion of copying to activation of 
the Auto Clear function, if it is enabled.
Time that can be set: 10 to 270 seconds (in 10 second increments)
NOTE: This item is not displayed if the Auto Clear function is Off.
1Display the Machine default screen, refer to Access the Machine Default 
Screen, on page 3-15.
2Press S or T to select Auto Clear 
Time and press [Enter].
3Press < or > to select the time 
from 10 to 270 seconds and press 
[Enter].
4Press [Reset]. The Copier Basic screen returns.
Silent Mode
This mode reduces the operating noise caused by the machine.
1Display the Machine default screen, refer to Access the Machine Default 
Screen, on page 3-15.
2Press S or T to select Silent 
Mode and press [Enter].
3Press S or T to select On or Off 
and press [Enter].
4Press [Reset]. The Copier Basic screen returns.
On :
On :
: Auto  Clear Time
Auto  Clear Au to  S l eep Mac h i n e Defau l t:
:90Sec.
Auto  Clear Time:
10-270Sec.90Sec.
Silent Mode
Auto  Clear Au to  S l eep Mac h i n e Defau l t:
On :
:
:OnOff
Silent Mode:
Off
On*
Downloaded From ManualsPrinter.com Manuals 
						

							System Settings 
3-28 ADVANCED OPERATION GUIDE
Viewing and Printing the Total Counter
You can view the total counts on the Operation Panel and print a counter 
report.
Viewing the Total Counter
NOTE: You can view the Output Counter and the Scanning Counter.
1Press [System Menu / Counter].
2Press S or T to select Counter 
check and press [Enter].
3Press S or T to select Output 
count or Scan count and press 
[Enter].
4Press S or T to view the counter.
5When you have finished viewing the counters, press S or T to select End 
and press [Enter].
6Press [Reset]. The Copier Basic screen returns.
Printing the Counter Report
NOTE: Ensure that A4/11 × 81/2 paper is loaded in the cassette when 
printing the counter report.
1Press [System Menu / Counter].
2Press S or T to select Counter 
check and press [Enter].
3Press S or T to select Print 
counter report and press [Enter].
The counter report is printed.
Co u n ter Ch ec k System Menu / Counter:
Language
Byp ass Setti ng
Scan Count
Co u n ter Ch ec k:
End
Output Count
End
Co py
Output Count:
Printer1.234.567
0.001.234 :
:
Co u n ter Ch ec k System Menu / Counter:
Language
Byp ass Setti ng
Scan Count
Co u n ter Ch ec k:
Output Count
P ri n t c o u n ter rep o rt
Downloaded From ManualsPrinter.com Manuals