Kyocera KM 1650 User Manual

							Printer Settings 
ADVANCED OPERATION GUIDE 2-43
6Press < or > to select the RAM 
disk size, 1 to 1024 Mbyte can be 
selected. Press [Enter].
7Press [Reset]. 
8Press S or T to select Yes and 
press [Enter].
The machine restarts.
RAM Di sk si ze
28Mb yte
Yes
No
Do you want to restart?
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Settings 
2-44 ADVANCED OPERATION GUIDE
Paper Handling
The following settings are available:
• Multi-Bypass Tray Mode
• Paper Source
• Duplex Print Mode
• Output Destination
• Override A4/Letter
Access the Paper Handling Screen
1Press [Printer].
2Press S or T to select MENU 
and press [Enter].
3Press S or T to select Paper 
Handling and press [Enter].
The Paper Handling screen 
displays.
Select the options required.
Multi-Bypass Tray Mode
If you select First, any paper loaded in the Multi-Bypass Tray will be fed.
1Display the Paper Handling screen, refer to Access the Paper Handling 
Screen, on page 2-44.
2Press S or T to select Bypass 
Mode and press [Enter].
3Press S or T to select Cassette 
or First and press [Enter].
4Press [Reset]. The Printer Basic screen displays.
GO
CANCEL
Read y
MENU
Men u
Print Quality
RAM Di sk Mo d e
Paper Handling
Back
Bypass Mode
Paper Handling
Feed  S el ec t
Back
Cassette
Bypass Mode
Fi rst
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Settings 
ADVANCED OPERATION GUIDE 2-45
Paper Source
Use to set the Paper Source to be selected first.
1Display the Paper Handling screen, refer to Access the Paper Handling 
Screen, on page 2-44.
2Press S or T to select Feed 
Select and press [Enter].
3Press S or T to select the paper 
source and press [Enter].
4Press [Reset]. The Printer Basic screen displays.
Duplex Print Mode
Use to set the binding position on finished prints for duplex printing.
NOTE: This setting is displayed only if the optional Duplex Unit is 
installed.
Back
Bypass Mode
Paper Handling
Feed  S el ec t
Back
Bypass
Feed S elec t
Cassette 1
Setting Binding position
Short Edge BindBinding at a short edge
Long Edge BindBinding at a long edge
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Settings 
2-46 ADVANCED OPERATION GUIDE
1Display the Paper Handling screen, refer to Access the Paper Handling 
Screen, on page 2-44.
2Press S or T to select Duplex 
Mode and press [Enter].
3Press S or T to select Short 
edge bind or Long edge bind and 
press [Enter].
4Press [Reset]. The Printer Basic screen displays.
Output Destination
Use to set the paper Output Destination.
NOTE: This item is displayed only if the optional Finisher or Job 
Separator is installed.
1Display the Paper Handling screen, refer to Access the Paper Handling 
Screen, on page 2-44.
2Press S or T to select Stack 
Select and press [Enter].
3Press S or T to select the paper 
output destination and press 
[Enter].
4Press [Reset]. The Printer Basic screen displays.
Paper Handling
Bypass Mode
Feed  S el ec t
Duplex Mo de
Duplex Mode
Back
None
Short Edge Bind
Setting Output destination
Top TrayMain body output tray
FinisherOptional Finisher
Job SeparatorOptional Job Separator
Bypass Mode
Paper Handling
Feed  S el ec t
Stack Select
Back
Top Tray
Select Output Tray
Fi ni sher
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Settings 
ADVANCED OPERATION GUIDE 2-47
Override A4/Letter
The A4 and 81/2× 11 (Letter) sizes can be regarded as the same size.
1Display the Paper Handling screen, refer to Access the Paper Handling 
Screen, on page 2-44.
2Press S or T to select Override 
A4/LT and press [Enter].
3Press S or T to select On or 
Offand press [Enter].
4Press [Reset]. The Printer Basic screen displays.
Paper Handling
Feed  S el ec t
Stack Select
O verri d e A4 / LT
Back
On
Override A4/LT
Off
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Settings 
2-48 ADVANCED OPERATION GUIDE
Other Printer Settings
You can set the following items for other printer settings.
• Form Feed Timeout
• Received Data Dump
• Printer Function Resetting
• Resource Protect Mode
• Auto Continue
• Duplex Error Detection
• Stapling Error Detection
• Printing a Service Status Page
Access the Others Screen
1Press [Printer].
2Press S or T to select MENU 
and press [Enter].
3Press S or T to select Others 
and press [Enter]. The Others 
screen displays.
Select the options required.
GO
CANCEL
Read y
MENU
Men u
RAM Di sk Mo d e
Paper Handling
Others
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Settings 
ADVANCED OPERATION GUIDE 2-49
Form Feed Timeout
If this machine does not receive any information indicating the end of data 
after receiving the last data, the machine waits for a certain time without 
printing the last page. When the preset time elapses, the machine 
automatically performs a form feed. If you set the time to 0, the machine 
does not perform a form feed until GO is manually selected.
1Display the Others screen, refer to Access the Others Screen, on page 2-
48.
2Press S or T to select Form 
Feed Time Out and press [Enter].
3Press < or > to set the time, 0 to 
495 seconds in 5 second 
increments can be selected. 
Press [Enter].
4Press [Reset]. The Printer Basic screen displays.
Received Data Dump
You can print data received as hexadecimal codes for debugging 
programs and files.
1Display the Others screen, refer to Access the Others Screen, on page 2-
48.
2Press S or T to select Print HEX-
DUMP and press [Enter].
3Press S or T to select OK and 
press [Enter].
Waiting displays and then the 
Printer Basic screen.
4Send data to the printer, dump pages are printed.
5Press S or T to select GO and press [Enter]. 
6Press [Reset]. The Printer Basic screen displays.
Back
Fo rm Feed  Ti me-O ut
Others
Print HEX-DUMP
(0
Fo rm Feed Time-O ut
30495)sec .
Back
Fo rm Feed  Ti me-O ut
Others
Print HEX-DUMP
Back
OK
Print HEX-DUMP
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Settings 
2-50 ADVANCED OPERATION GUIDE
Printer Function Resetting
This function resets the printer’s temporary settings (such as the current 
page orientation and font) to the default settings.
1Display the Others screen, refer to Access the Others Screen, on page 2-
48.
2Press S or T to select Printer 
Reset and press [Enter].
3Press S or T to select OK and 
press [Enter].
The printer functions are reset.
Resource Protect Mode
The Resource Protect Mode protects the resource data such as 
downloaded fonts and macros and memorizes the PCL resources even if 
the emulation mode is switched off. If you select Permanent, temporary 
resources are not protected. If you select Perm/Temp, temporary 
resources are protected.
1Display the Others screen, refer to Access the Others Screen, on page 2-
48.
2Press S or T to select Resource 
Prot and press [Enter].
3Press S or T to select Off, 
Permanent or Perm/Temp and 
press [Enter].
4Press [Reset]. The Printer Basic screen displays.
Fo rm Feed  Ti me-O ut
Others
Print HEX-DUMP
Printer Reset
Printer Reset
Back
OK
Reso u rc e P ro t. Others
Print HEX-DUMP
Printer Reset
Back
Off
Reso u rc e P ro t.
Permanent
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Settings 
ADVANCED OPERATION GUIDE 2-51
Auto Continue
If any of the following error messages appear, the error can be cleared and 
printing can be continued after the preset recovery time elapses (auto 
continue).
• Memory Overflow
• Print overrun
• KPDL error
• File not found
• HARD DISK error
• RAM disk error
• MemoryCard err
• Illegal Account
• Exceeded Max.out
• Account error
• Duplex disabled
•Add Staples
• e-MPS not stored
• Opt. ROM error
You can also set the time that elapses before Auto Continue is activated.
1Display the Others screen, refer to Access the Others Screen, on page 2-
48.
2Press S or T to select Auto 
Continue and press [Enter].
3Press S or T to select On or Off 
and press [Enter]. If you have 
selected On, Change # displays.
4To set the time that elapses 
before Auto Continue is activated, 
press S or T to select Change # 
and press [Enter].
The Auto Continue (time) screen displays.
5Press < or > to select the time, 0 
to 495 seconds in 5 second 
increments can be selected. 
Press [Enter].
6Press [Reset]. The Printer Basic screen displays.
Auto  Co ntinue Reso u rc e P ro t. Others
Printer Reset
Back
On
Auto Continue
Off
Change #
On Auto Continue
Off
(0
Auto Continue (Time)
30495)sec .
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Settings 
2-52 ADVANCED OPERATION GUIDE
Duplex Error Detection
This setting is available if the optional Duplex Unit is installed. You can 
select whether or not to display Duplex disabled Press GO when you select 
duplex printing and specify a paper type that cannot be used for duplex 
printing, such as label.
1Display the Others screen, refer to Access the Others Screen, on page 2-
48.
2Press S or T to select Finishing 
Error and press [Enter].
3Press S or T to select Proces. 
Duplex print and press [Enter].
4Press S or T to select On or Off 
and press [Enter].
5Press [Reset]. The Printer Basic screen displays. Setting Processing
OnIf you select GO, one-sided printing is performed.
If you select CANCEL, printing is canceled.
OffOne-sided printing is performed.
Fi ni shi ng  Erro r Auto  Co ntinue
Reso u rc e P ro t. Others
Finishi ng  Erro r
Back
P ro c es.  Du p l ex p ri n t
Staple Setting
Back
On
Duplex Print Process
Off
Downloaded From ManualsPrinter.com Manuals