Kyocera FS C5400DN User Manual

Using the Operation Panel 4-15
3Press [Yes] ([Left Select]). The message Accepted. appears and 
the printer prints the font list.
Pressing [No] ([Right Select]) returns you to the Report Print menu 
without printing the font list.
RAM File List (Printing a list of the files on the RAM disk)
This allows you to print a list of the files on the RAM disk.
IMPORTANT  This is displayed when RAM Disk Mode is set to ON.
1In the Report Print menu, press U or V to select RAM File List.
2Press [OK]. A confirmation...

4-16Using the Operation Panel 
MemCard FileList (Printing a list of the files on a memory 
card)
This allows you to print a list of the files on a memory card.
IMPORTANT  This message will be displayed only when the memory 
card is installed in the printer and properly formatted.
1In the Report Print menu, press U or V to select MemCard 
FileList.
2Press [OK]. A confirmation message is displayed.
3Press [Yes] ([Left Select]). Accepted. appears and the printer 
prints a list of the files held on the...

Using the Operation Panel 4-17
USB Memory (USB memory selection)
This specifies the settings for removing the USB memory and printing 
USB memory content. 
The USB Memory menu automatically appears when you install the USB 
memory.
IMPORTANT  This message is displayed only when the USB host 
block is set to Unblock. For more information, please refer to I/F 
Block Set. (External interface block setting) on page 4-92
The options available in the USB Memory menu are as follows:
• Print File (Printing and...

4-18Using the Operation Panel 
Print File (Prints the selected file)
You can use this to specify printing for files in the USB memory.
1Use the procedure described in Print File (Printing and checking the 
files in the USB memory) on page 4-17 to display a list of the files in 
the folder containing the file you want to print.
2Press U or V to select the file you want to print.
3Press [OK]. The Copies menu screen appears.
IMPORTANT  To use this feature, an optional hard disk must be 
installed in the...

Using the Operation Panel 4-19
11Press [Yes] ([Left Select]).  The message Accepted. appears and 
printing begins.
Press [No] ([Right Select]) to return to the file list selection screen.
Detail (Shows the details of the selected file)
Use this to view detailed information on the files and folders in the USB 
memory.
1Use the procedure described in Print File (Printing and checking the 
files in the USB memory) on page 4-17 to display a list of the files or 
folders you want to check.
2Press U or V to...

4-20Using the Operation Panel 
2Press [OK]. The printer is now ready for the USB memory to be 
removed and the Mode Selection menu screen appears.
IMPORTANT  If the screen on the left appears, the USB memory is 
still being used. Wait until the relevant job (e.g. printing from the USB 
memory) has ended and then repeat the Remove Memory procedure.Cannot remove the
memory while in use.
 
Downloaded From ManualsPrinter.com Manuals 

Using the Operation Panel 4-21
Custom Box
IMPORTANT  To use a Custom Box, an optional hard disk must be 
installed in the printer. The hard disk must be formatted from the 
printer. For more information, refer to Format Hard Disk on page 4-77.
A Custom Box is a general-purpose box that allows users to store print 
data on the printers hard disk so that it can be reused as required.
Use the COMMAND CENTER to create or delete a Custom Box, or to set 
a Box Password. For more information, refer to the...

4-22Using the Operation Panel 
2When the password has been entered, press [Enter] ([Right 
Select]). 
Box number/Box name (Select a File)
To print/delete a file in the Custom Box, first select the file to be printed or 
deleted.
1Press U or V to select the file to be printed/deleted.
2When [Select] ([Right Select]) is pressed, the file is selected. A 
checkmark will be placed on the right of the selected file.
Select the checkmarked file and press [Select] ([Right Select]) 
again to cancel the...

Using the Operation Panel 4-23
2Press U or V to select Print.
3Press [OK]. The Copies menu screen appears.
If you want to change the number of remaining copies to be printed, 
use the arrow keys to set the number of copies to be printed.
Press U or V to increase or decrease, respectively, the value at the 
blinking cursor.
Use Y and Z to move the cursor right and left.
If Job Accounting is enabled, enter the account ID in the login screen 
that appears. The Copies menu screen appears after login.
4Press...

4-24Using the Operation Panel 
2Press U or V to select Delete.
3Press [OK]. A confirmation screen appears.
4Press [Yes] ([Left Select]). The message Completed. appears 
and the selected file(s) are deleted.
Pressing [No] ([Right Select]) returns you to the Print/Delete 
menu screen without deleting the file.
Check Custom Box Details
Details for the Custom Box that is currently displayed will appear.
1In the file list screen, press [Menu] ([Left Select]).
2Press U or V to select Box Detail.
3Press [OK]....