Kyocera FS C5400DN User Manual

Machine Parts 1-1
1 Machine Parts
This chapter provides explanations and illustrations for you to 
determine the parts and their functions. Try to be familiar with 
the names and functions of these parts for correct use and 
optimal performance.
This chapter contains explanations on the following topics:
Components at the Front of the Printer 1-2
Components at the Left of the Printer 1-2
Internal Components 1-3
Components at the Rear of the Printer 1-3
Operation Panel 1-4
Downloaded From...

1-2Machine Parts 
Components at the Front of the Printer
1 Operation Panel
2 Front Cover
3 Paper Stopper
4 Top Cover (Top Tray)
5 MP (Multi-Purpose) Tray
6 Paper Cassette
7 Power Switch
Components at the Left of the Printer
8 Left Cover
9 Waste Toner Box
10 Magenta Toner Container (M)
11 Cyan Toner Container (C)
12 Yellow Toner Container (Y)
13 Black Toner Container (K)
2
5
613
7
4
8
9
10 11 12 13
Downloaded From ManualsPrinter.com Manuals 

Machine Parts 1-3
Internal Components
14 Paper Transfer Unit
15 Paper Ramp
16 Duplex Unit
Components at the Rear of the Printer
17 USB Memory Slot
18 Power Cord Connector
19 Option Interface Slot
20 Network Indicators
21 Network Interface Connector
22 USB Interface Connector
23 Rear Cover
17
1819 2021
22
23
14
16
15
Downloaded From ManualsPrinter.com Manuals 

1-4Machine Parts 
Operation Panel
24 Message Display
25 Ready Indicator
26 Data Indicator
27 Attention Indicator
28 Arrow Keys
29 [MENU] Key
30 [Left Select] Key
31 [Right Select] Key
32 [Back] Key
33 [OK] Key
34 [Cancel] Key
24 25 26
2728 29
33 30 31 32 34
Downloaded From ManualsPrinter.com Manuals 

Printing Operation 2-1
2 Printing Operation
This chapter contains explanations on the following topics:
Changing Network Interface Parameters 2-2
Printing a Status Page 2-3
Installing the Printer Driver 2-4
Printing from Application Software 2-9
Status Monitor 2-10
Uninstalling Software (Windows PC) 2-13
Downloaded From ManualsPrinter.com Manuals 

2-2Printing Operation 
Changing Network Interface Parameters
This printer supports TCP/IP, TCP/IP (IPv6), NetWare, AppleTalk, IPP, 
SSL Server and the IPSec protocols and Security Level. 
The table below shows the items required for each of the settings. 
Configure the printers network parameters as appropriate for your PC 
and your network environment. 
For details of the procedure, refer to the Using the Operation Panel on 
page 4-1.
MenuSubmenuSetting
Network TCP/IP Set. TCP/IP On/Off
IPv4...

Printing Operation 2-3
Printing a Status Page
After completing the network settings, print a status page. The status 
page allows you to confirm a range of information, including network 
addresses and network protocols. 
To print a status page, select Status Page from the Report Print menu. 
Refer to Report Print on page 4-11 for detailed information.
Downloaded From ManualsPrinter.com Manuals 

2-4Printing Operation 
Installing the Printer Driver
Ensure the printer is plugged in and connected to the PC before installing 
the printer driver from the CD-ROM.
Installing the Software in Windows
If you are connecting this printer to a Windows PC, follow the next steps 
to install the printer driver. The example shows you how to connect your 
printer to a Windows Vista PC.
You can use either Express Mode or Custom Mode to install the software. 
Express Mode automatically detects connected printers...

Printing Operation 2-5
Express Mode
In Express Mode, the installer automatically detects the printer when it is 
turned on. Use Express Mode for standard connection methods.
1In the installation method selection window, select Express Mode. 
The print system detection window appears and the installer detects 
the connected printers. If the installer does not detect a print system, 
check that the print system is connected via USB or a network and 
that it is turned on. Then return to the print system...

2-6Printing Operation 
Custom Mode 
Use Custom Mode if you want to specify the printer port and select the 
software to be installed.
For example, if you do not want fonts installed on your computer to be 
replaced, select Custom Mode and deselect the Fonts checkbox in the 
utility tab.
1Select Custom Mode.
2Following the instructions in the install wizard window, select the 
software packages to be installed and the specify the port, etc.
For details, refer to Custom Installation in the printer driver...