Kyocera FS C5400DN User Manual

Using the Operation Panel 4-45
1Pull the cassette out of the printer and set the paper size using the 
paper size dial.
2Adjust the paper guides in the cassette to the size of the paper to be 
used for printing and load the paper into the cassette. 
Custom Paper Size
If you use a non-standard size paper, load the paper and turn the paper 
size dial to Other (refer to Loading Paper on page 3-14).
Selecting the Size Dial Setting
1Pull the cassette out of the printer and set the paper size dial to Other....

4-46Using the Operation Panel 
4Press [OK]. The Other Paper screen appears listing the paper sizes 
that can be used in the cassette. 
The available paper sizes are as follows:
Envelope Monarch (#2)
Envelope #10 (#2)
Envelope DL (#2)
Envelope C5
Executive
Letter
Legal
A4
B5
A5
A6 (#1)
Envelope #9 (#2)
Envelope #6 (#2)
ISO B5
Custom
Oufuku Hagaki (#2)
Oficio II
16K
Statement
Folio
Youkei 2 (#2)
Youkei 4 (#2)
(#1): Cassette 1 only
(#2): Only when optional paper feeder PF-510 is  installed.
5Press U or V to...

Using the Operation Panel 4-47
Setting a Custom Paper Size
In the procedure below, select the units to be used for entering the custom 
paper size and then enter the paper width and length. As shown in the 
figure, enter the Y and X values for the paper size, using the selected 
units.
1In the Cassette # Set menu, press U or V to select Custom 
PaperSize.
# shows the number of the cassette installed in the printer (1 to 5).
2Press [OK]. The Custom PaperSize menu screen appears.
3Press U or V to select...

4-48Using the Operation Panel 
8Use the arrow keys to enter the paper length.
Press U or V to increase or decrease, respectively, the value at the 
blinking cursor. 
Use Y and Z to move the cursor right and left.
The range of paper lengths you can set for each cassette is as 
follows:
• Cassette: 
148 to 356 mm (5-13/16 to 14 inches)
• Paper Feeder PF-500/PF-510: 
162 to 356 mm (6-25/64 to 14 inches)
9Press [OK]. The entered paper length is set and the Custom 
PaperSize menu screen reappears.
10Press U...

Using the Operation Panel 4-49
2Press [OK]. The Cassette # Set. menu screen appears.
# shows the number of the cassette installed in the printer (1 to 5).
3Press U or V to select Media Type.
4Press [OK]. The Media Type screen appears listing the media types 
that can be used with the selected cassette.
The available Media Types are as follows:
5Press U or V to select the desired media type.
6Press [OK]. The media type for the cassette is set and the Paper 
Settings menu screen reappears.
Media Type Set....

4-50Using the Operation Panel 
Setting the Paper Thickness
You set the paper thickness by selecting a paper weight. 
The available paper weights are as follows (grammages are provided as 
a guide)
Extra Heavy (OHP)
Heavy 3 (170 to 220 g/m
2)
Heavy 2 (135 to 170 g/m
2)
Heavy 1 (120 to 135 g/m
2)
Normal 3 (90 to 120 g/m
2)
Normal 2 (75 to 90 g/m
2)
Normal 1 (64 to 75 g/m
2)
Light (60 to 64 g/m
2)
The default setting is Normal 2 for plain paper. When using any paper 
other than plain paper, you should...

Using the Operation Panel 4-51
1In the Paper Settings menu, press U or V to select Media Type 
Set..
2Press [OK]. The Media Type Set. screen appears listing the 
media types that can used with the printer.
3Press U or V to select the media type for which you want to set the 
paper weight. 
4Press [OK]. A menu for the selected media is displayed.
5Press U or V to select Paper Weight.
6Press [OK]. The Paper Weight screen appears listing the paper 
weights that can used with the printer.
7Press U or V to...

4-52Using the Operation Panel 
4Press [OK]. A menu for the selected media is displayed.
5Press U or V to select Paper Weight.
6Press [OK]. The Paper Weight screen appears listing the paper 
weights that can used with the printer.
7Press U or V to select the desired paper weight.
8Press [OK]. The paper weight is set and the Media Type Set. 
screen reappears.
Use the procedure below to specify whether duplex printing is 
permitted with custom paper.
1In the Paper Settings menu, press U or V to select Media...

Using the Operation Panel 4-53
8Press [OK]. The duplex printing permission is set and the Media 
Type Set. screen reappears.
Reset Type Adj. (Resets customized settings)
This resets all the settings specified in Media Type Set. (Paper type 
settings) on page 4-49.
1In the Paper Settings menu, press U or V to select Reset Type 
Adj..
2Press [OK]. A confirmation screen appears.
3Press [Yes] ([Left Select]). The message Completed. appears 
and the Paper Settings menu reappears.
Pressing [No] ([Right...

4-54Using the Operation Panel 
Print Settings
These settings specify the following printing parameters: paper feed 
source, paper feed mode, duplex printing, override A4/LTR, emulation 
mode, color mode, print quality, and setting pagination.
The options available in Print Settings are as follows:
• Paper Selection (Selecting the paper feed source)
• Paper Feed Mode (Setting the paper feed source)
• Duplex (Setting the duplex printing)
• Override A4/LTR (Overriding difference between A4 and Letter)
•...