Kyocera FS C5400DN User Manual

Using the Operation Panel 4-55
Paper Feed Mode (Setting the paper feed source)
This mode specifies how the paper should be fed once the paper feed 
source and paper type have been chosen. If Auto is selected, the printer 
searches for a paper feed source that matches the paper size and type, 
and paper is then delivered from that source. If Fixed is selected and 
there is no matching paper feed source, handling proceeds as specified 
by Paper Mismatch for Error Handling. For details on paper 
feeding...

4-56Using the Operation Panel 
Duplex (Setting the duplex printing)
Using the duplexer, you can automatically print on both sides of the paper. 
The duplexer is mounted underneath the printer.
Duplex printing is only available for those media types that can be fed 
from one of the cassettes. 
Duplex printing is available for the following paper(media) types:
PLAIN
PREPRINTED
BOND
RECYCLED
ROUGH
LETTERHEAD
COLOR
COATED
PREPUNCHED
HIGH QUALITY
IMPORTANT  Duplex printing for coated paper (Coated) is...

Using the Operation Panel 4-57
1In the Print Settings menu, press U or V to select Duplex.
2Press [OK]. The Duplex screen  appears showing the list of 
available duplex printing modes.
3Press U or V to select the desired duplex printing mode.
The message display toggles through the following:
Off (default)
Bind Long Edge
Bind Short Edge
Selecting Off disables duplex printing.
4Press [OK]. The duplex printing mode is set and the Print Settings 
menu reappears.
Override A4/LTR (Overriding difference...

4-58Using the Operation Panel 
2Press [OK]. The Emulation Set. menu screen appears.
3Press U or V to select Emulation.
4Press [OK]. The Emulation screen  appears showing a list of the 
available emulations.
The available emulations are as follows:
PCL6
KPDL
KPDL(Auto)
5Press U or V to select the desired emulation.
6Press [OK]. The emulation is set and the Print Settings menu 
reappears.
Error Report (Printing KPDL errors)
The printer can print error descriptions when printing error occurs during 
KPDL...

Using the Operation Panel 4-59
Color Mode (Selecting color or black & white printing)
You can use the Color Mode menu on the operation panel to select the 
Color or Black & White printing mode. By default, the printer is set to print 
in color mode.
1In the Print Settings menu, press U or V to select Color Mode.
2Press [OK]. The Color Mode screen  appears.
3Press U or V to select the desired color mode.
4Press [OK]. The color mode is set and the Print Settings menu 
reappears.
Print Quality (Setting...

4-60Using the Operation Panel 
4Press [OK]. The EcoPrint mode is set and the Print Quality 
menu screen reappears.
Gloss Mode (Selecting the Gloss mode)
Gloss mode, when set to High, increases the effect of glossiness in 
printing by reducing the printing speed by half. Gloss mode is not 
available when Labels and Transparency is selected as the paper 
type setting.
IMPORTANT  Depending on the paper used, printing in gloss mode 
may cause wrinkle in paper. To reduce wrinkle, try using thicker paper.
Use...

Using the Operation Panel 4-61
Copies (Number of copies)
You can set the number of copies of each page to be printed for the 
current interface. 
1In the Page Setting menu, press U or V to select Copies.
2Press [OK]. The Copies screen  appears.
3Use the arrow keys to set the number of copies.
Press U or V to increase or decrease, respectively, the value at the 
blinking cursor. 
Use Y and Z to move the cursor right and left.
4Press [OK]. The setting is stored and the Page Setting menu 
reappears....

4-62Using the Operation Panel 
Wide A4 (Wide A4 pitch)
Turn this to On to increase the maximum number of characters that can 
be printed in a line for an A4 page (78 characters at 10 pitch) and Letter 
size page (80 characters at 10 pitch). This setting is only effective in PCL 
6 emulation.
1In the Page Setting menu, press U or V to select Wide A4.
2Press [OK]. The Wide A4 screen  appears.
3Press U or V to select whether Wide A4 mode is enabled.
4Press [OK]. The wide mode setting is set and the Page...

Using the Operation Panel 4-63
TIFF/JPEG Size (Adjusting the TIFF/JPEG file print out size)
Use this setting to select the printing method used when TIFF or JPEG 
files are printed directly.
1In the Page Setting menu, press U or V to select TIFF/JPEG Size.
2Press [OK]. The TIFF/JPEG Size screen appears.
The options available in TIFF/JPEG Size are as follows:
Paper Size (default)
Images are resized so that they fill the paper size when printed.
Image Resolution
Image files are printed at the resolution...

4-64Using the Operation Panel 
Network (Network settings)
This printer supports TCP/IP and TCP/IP (IPv6) protocols.
IP is an abbreviation for Internet Protocol. This printer routinely uses the 
TCP/IP (IPv4) protocol, but provides a separate setting for the next-
generation IP, IPv6. 
TCP/IP (IPv4) uses 32-bit IP addresses, but the rapid growth in the 
number of Internet users has resulted in a shortage of IP addresses. IPv6 
was developed to expand the range of available IP addresses by using 
128-bit...