Konica Minolta magicolor 4690MF User Manual

Configuration Menu Overview 29
MACHINE SETTING Menu
MACHINE SETTING AUTO PANEL RESET
PREHEAT MODE
ENERGY SAVE MODE
LCD CONTRAST
KEY SPEED TIME TO START
INTERVAL
LANGUAGE
LAMP OFF TIME
LAMP WARMUP TIME
BUZZER VOLUME
INITIAL MODE
TONER EMPTY
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview 30
Manufacturer’s default settings appear in bold.
TONER NEAR EMPTY
AUTO CONTINUE
CALIBRATION
AUTO PANEL RESETSettingOFF / 30sec / 1min / 2min / 
3min / 4min / 5min
Select whether or not all settings in the control 
panel return to their default settings when no 
operation is performed for a set length of time.
To set the machine to perform the auto panel 
reset operation, select from 30sec, 1min, 2min, 
3min, 4min or 5min for the length of time until 
the auto panel reset...

Configuration Menu Overview 31
KEY 
SPEEDTIME TO 
STARTSetting0.1sec / 0.3sec / 0.5sec / 
1.0sec / 1.5sec / 2.0sec / 
2.5sec / 3.0sec
Specify the length of time until the cursor begins 
to move continuously when a key is held down.
INTERVALSetting0.1sec / 0.3sec / 0.5sec / 
1.0sec / 1.5sec / 2.0sec / 
2.5sec / 3.0sec
Specify the length of time until the cursor contin-
uously moves between settings or characters.
LANGUAGESettingENGLISH / FRENCH / GERMAN / 
ITALIAN / SPANISH / PORTU-
GUESE
 / RUSSIAN /...

Configuration Menu Overview 32
LAMP WARMUP TIMESettingAUTO / FIX
Specify the warm-up time for the lamp of the 
scanner unit.
If 
AUTO is selected, the length of time to 
recover from Energy Save mode when the 
machine is turned on is adjusted according to 
the room temperature. Since the machine can-
not be used until its condition is completely sta-
bilized, select this setting, for example, if you 
wish to scan at a high image quality from the 
first page.
If 
FIX is selected, the machine can be used...

Configuration Menu Overview 33
CALIBRATIONSettingON / OFF
Select whether or not to perform image stabili-
zation. If 
ON is selected, image stabilization is 
started.
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview 34
PAPER SETUP Menu
PAPER SETUP TRAY1 PAPER
TRAY2 PAPER
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview 35
Manufacturer’s default settings appear in bold.
TRAY1 PAPERMedia typePLAIN PAPER / THICK PAPER / 
THICK PAPER2 / TRANSPARENCY / 
LABELS / LETTERHEAD / GLOSSY / 
GLOSSY2 / ENVELOPE / POSTCARD
Paper size
When a setting other than ENVELOPE 
or 
POSTCARD is selected: A4 / A5 / B5 
/ 
LEGAL / LETTER / G LETTER / 
STATEMENT / EXECUTIVE / FOLIO / 
G LEGAL / OFICIO (Mexico only) / 
CUSTOM
When ENVELOPE is selected: COM10 / 
C6 / DL / MONARCH / CHOU#3 / CUS-
TOM
When POSTCARD is...

Configuration Menu Overview 36
TRAY2 PAPERPaper sizeA4 / A5 / B5 / LETTER / G LETTER / 
STATEMENT / EXECUTIVE / CUSTOM
Select the size of the media loaded into Tray 2. If 
CUSTOM is selected as the paper size, specify settings 
for 
LENGTH and WIDTH separately.
The Setting range for 
LENGTH is 5.83 to 11.69 
inches (
148 to 297 mm).
The default setting is 
11.00 inches (279 mm) for 
USA and Canada, and 
11.69 inches (297 mm) for 
other countries.
The Setting range for 
WIDTH is 3.63 to 8.50 inches 
(
92...

Configuration Menu Overview 37
ADMIN. MANAGEMENT Menu
The ADMIN. MANAGEMENT menu is accessible only by the adminis-
trator. To display the settings for this menu, select 
ADMIN. MANAGE-
MENT
, use the keypad to type in the 6-digit administrator access code 
(default: 000000), and then press the Select key.
ADMIN. MAN-
AGEMENTADMINISTRATOR 
NO.
REMOTE MONITOR
NETWORK SET-
TINGTCP/IP
IP ADDR. SET-
TING
*1
DNS CONFIG.*1
DHCP*1
BOOTP*1
ARP/PING*1
HTTP*1
FTP*1
SMB*1
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview 38
BONJOUR*1
IPP*1
SLP*1
SNMP*1
SPEED/
DUPLEX*1
E-MAIL SETTING SMTP
SENDER NAME
E-MAIL ADDRESS
DEFAULT SUBJECT
SMTP SERVER 
ADDR.
SMTP PORT NO.
SMTP TIMEOUT
TEXT INSERT
Downloaded From ManualsPrinter.com Manuals