Konica Minolta magicolor 2590MF User Manual

Clearing Media Misfeeds 167
8Reinstall the drum cartridge.
9Carefully close the engine cover.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds 168
10Carefully close the scanner unit.
11Remove the lid from Tray 1.
12Remove any misfed paper.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds 169
13Reattach the lid.
If the paper in Tray 2 is 
being used, perform the 
procedure starting from 
step 14 for clearing a 
media misfeed.
14Pull out Tray 2 as far as possi-
ble.
15Lift up Tray 2 to remove it.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds 170
16Remove any misfed paper.
17Remove the lid from Tray 2, and 
then remove all paper from the 
tray.
18Fan the paper, and align its 
edges.
19Load the media in Tray 2, and 
attach the lid.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds 171
20Reinsert Tray 2.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds 172
Clearing a Media Misfeed from the Duplex Option
1Open the duplex cover.
2Carefully pull out the misfed 
media.
Always remove the mis-
fed media in the feed 
direction as shown only.
3Carefully close the duplex cover.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds 173
Clearing a Media Misfeed from the ADF
1Open the ADF feed cover.
2Remove the document into the 
ADF document feed tray.
3Lift to open the ADF cover.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds 174
4Remove any misfed media.
5Close the ADF cover.
6Close the ADF feed cover.
Downloaded From ManualsPrinter.com Manuals 

Solving Problems with Media Misfeeds 175
Solving Problems with Media Misfeeds
Frequent misfeeds in any area indicate that area should be checked, 
repaired, or cleaned. Repeated misfeeds may also happen if you’re 
using unsupported print media or original media.
Symptom Cause Solution
Several 
sheets go 
through the 
machine 
together.The front edges of 
the media are not 
even.Remove the media and even up the 
front edges, then reload it.
The media is moist 
from humidity.Remove the moist media and...

Solving Problems with Media Misfeeds 176
Media is mis-
fed in the 
ADF.The loaded document 
does not meet the 
specifications.Load the correct document. For details 
on the documents that can be loaded, 
refer to “Documents that can be loaded 
into the ADF” on page 69.
The loaded document 
exceeds the maxi-
mum capacity.Load the document so that it does not 
exceed the maximum capacity. For 
details on the documents that can be 
loaded, refer to “Documents that can 
be loaded into the ADF” on page 69....