Konica Minolta magicolor 2590MF User Manual

10
10Troubleshooting
Downloaded From ManualsPrinter.com Manuals 

Introduction 158
Introduction
This chapter provides information to aid you in resolving machine problems 
you may encounter, or at least guide you to the proper sources for help. 
Preventing Media Misfeeds page 159
Understanding the Media Path page 160
Clearing Media Misfeeds page 160
Solving Problems with Media Misfeeds page 175
Solving Other Problems page 178
Solving Problems with Printing Quality page 184
Status, Error, and Service Messages page 191
Downloaded From ManualsPrinter.com Manuals 

Preventing Media Misfeeds 159
Preventing Media Misfeeds
Make sure that...
Media matches the machine specifications.
Media is flat, especially on the leading edge.
The machine is on a hard, flat, level surface.
You store media in a dry location away from moisture and humidity.
The output bin is positioned horizontally when postcards are being printed.
You remove transparencies from the output bin immediately after printing to 
avoid static buildup.
You always adjust the media guides in Tray 1 after...

Understanding the Media Path 160
Understanding the Media Path
Understanding the media path will help you locate media misfeeds.
1. ADF media feed rollers
2. Document feed tray
3. Document output tray
4. Fuser unit
5. Duplex option
6. Tray 2 (optional)
7. Tray 1
8. Toner cartridge carousel
9. Drum cartridge
10. Transfer belt unit
11. Output bin
Clearing Media Misfeeds 
To avoid damage, always remove misfed media gently, without tearing it. Any 
piece of media left in the machine, whether large or small,...

Clearing Media Misfeeds 161
CAUTION
If you get toner in your eyes, wash it out immediately with cool water 
and consult a doctor.
If, after clearing the media misfeed, the misfeed message in the message 
window persists, open and close the engine cover. This should clear the mis-
feed message. 
Media Misfeed Messages and Clearing Procedures
Media Misfeed Message Page Reference
PAPER MISFEED
(Displaying alternately)
OPEN FRONT COVER
page 162
PAPER JAM
(Displaying alternately)
OPEN FRONT COVER
page 162...

Clearing Media Misfeeds 162
Clearing a Media Misfeed in the Machine
1Pull the scanner unit release 
lever.
The scanner unit cannot 
be released if the ADF 
has been opened. Be 
sure to gently close the 
ADF first, then release 
the scanner unit.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds 163
2Open the scanner unit.
Be careful not to touch 
the plate on the back of 
the scanner unit.
3Pull the lever, and then open the 
engine cover.
Do not touch the transfer 
belt.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds 164
If there is media in the 
output bin, remove it.
Before opening the 
engine cover, be sure to 
fold up the output bin.
4Carefully pull out the drum car-
tridge.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds 165
Note
Position the removed drum cartridge as 
shown in the illustration at the right.
Be sure to keep the drum cartridge 
horizontal and place it where it will not 
become dirty. Do not leave the drum 
cartridge removed for more than 15 
minutes, and do not place the removed 
drum cartridge in a location where it 
would be exposed to light directly (such 
as sunlight).
5Push the fuser separator levers 
back as far as possible.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds 166
6Remove any misfed media.
Always remove the mis-
fed media in the feed 
direction as shown only.
7Return the fuser separator 
levers to their original positions.
Downloaded From ManualsPrinter.com Manuals