Konica Minolta bizhub C552 User Manual

							bizhub C652/C652DS/C552/C552DS/C4525-15
5.2 Original Setting5
5.2 Original Setting
Configure the original status or original direction for outputting desired copies.
%Press [Original Setting].
Settings
Mixed Original Loads originals of different sizes into the ADF and scan them at a time.
Z-Folded  Original Correctly detects the original size when folded originals are loaded into the 
ADF and copied.
Original Size Select [Auto] to detect the size of the original automatically.
If the size of the original is not automatically detected, select the original 
size.
Custom Size Enter the original size.
Photo Size Select the photo size.
Binding Position Specify the original binding position (page margin) to prevent the copy 
from being printed upside-down when scanning a 2-sided original, 
Auto Automatically configures the binding position of 
the original.
• A binding margin along the long side of the 
paper is selected if the original length is 11-
11/16 inch (297 mm) or less.
• If the original length is more than 11-11/16 
inch (297 mm), a binding margin along the 
short side of the paper is selected.
Original Direction Specify the original direction to load into the ADF or place on the original 
glass when copying 2-sided originals or making 2-sided or combined cop-
ies.
Despeckle Reduces the influence of a dirt of the slit glass upon a copy output when 
loading an original in the ADF.
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-16
5.2 Original Setting5
Copying mixed originals
Loads originals of different sizes into the ADF and scan them at a time.
To copy onto paper of the same size as the original, select [Full Size] in the Zoom tab and select [Auto] on 
the Paper tab. To copy all original pages on paper of the same size, select [Auto] in the Zoom tab and select 
the desired paper size on the Paper tab.
0When [1-Sided > 2-Sided] is selected together with Auto Paper, the back side becomes blank if its 
paper size is different from that of the front side. For example, if a single-sided original is copied in the 
order of 11 × 17 (A3) and 8-1/2 × 11 (A4), it results in copying of the front side (11 × 17 (A3)) / back side 
(blank) and of the front side (8-1/2 × 11 (A4)) / back side (blank).
NOTICE
Load all of the original pages into the ADF so that the top of the pages is toward the back or the left side of 
the machine.
1Slide the adjustable lateral guides of the ADF to fit the size of the 
largest original page.
2Arrange originals in the order you want them to be scanned and 
load them face up in the ADF.
3In the basic settings screen, press [Original Setting].
4Press [Mixed Original].
%To cancel the setting, press [Mixed Original] again to deselect 
it.
The following chart shows the possible combinations of standard-sized paper that can be used for the Mixed 
Original setting.
 
Original SizeMaximum Original Width
11 e 17 
w (A3 
w)8-1/2 e 
11 v 
(A4 v)8-1/2 e 
14 w 
(B4 w)8-1/2 e 
11 w 
(A4 w)5-1/2 e 
8-1/2 v 
(A5 v)5-1/2 e 
8-1/2 
w (A5 
w)(B5 v)(B5 w)
11 e 17 w (A3 
w)oo------
8-1/2 e 11 v 
(A4 v)oo------
8-1/2 e 14 w 
(B4 w)ooo---o-
8-1/2 e 11 w 
(A4 w)ooooo-
o-
5-1/2 e 8-1/2 
v (A5 v)--ooo-o-
5-1/2 e 8-1/2 
w (A5 w)-----o-o
(B5 v)ooo---o-
(B5 w)--ooo-oo
o Possible to combine
- Not possible to combine
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-17
5.2 Original Setting5
Copying Z-folded originals
Correctly detects the original size when folded originals are loaded into the ADF and copied.
The length of the first page of the original is detected, and the subsequent pages are scanned as pages of 
the same size.
NOTICE
Unfold folded originals before loading them into the ADF. If the original is copied without being unfolded, a 
paper jam may occur.
1Load the original into the ADF.
2In the basic settings screen, press [Original Setting].
3Press [Z-Folded Original].
%To cancel the setting, press [Z-Folded Original] again to 
deselect it.
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-18
5.3 Quality/Density5
5.3 Quality/Density
Select the setting for the image type of the original to better adjust the copy quality/density.
%Press [Quality/Density].
Settings
Original Type Select the original type (text and image type) to obtain better copy quality. 
Text Copies originals containing only text. The edges of 
copied text are reproduced with sharpness, pro-
viding an image that is easy to read.
Text/Photo [Photo Paper]:
Select this setting to print photos from originals 
containing both text and images onto photograph-
ic paper. A smooth copy image is produced.
[Printed Photo]:
Select this setting to copy printed originals con-
taining both text and images, such as pamphlets or 
catalogs.
Photo [Photo Paper]:
Select this setting when the original photos are 
printed on photographic paper. Halftone original 
images (photographs, etc.) that cannot be repro-
duced with the usual settings will be reproduced in 
as nearly an original state as possible. A smooth 
copy image is produced.
[Printed Photo]:
Select this setting to copy printed originals, such 
as pamphlets or catalogs. Halftone original images 
(photographs, etc.) that cannot be reproduced with 
the usual settings will be reproduced in as nearly 
an original state as possible.
Map Select this setting to copy originals with a back-
ground color, originals containing pencil markings 
or fine colored lines such as maps. A sharp copy 
image is produced.
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-19
5.3 Quality/Density5
Original Type Dot Matrix Original Select this setting to copy originals containing only 
text that appears faint (such as that written with a 
pencil). The copied text is reproduced so that it is 
darker, making it easier to read.
Copied Paper Select this setting to copy images (originals) print-
ed using this machine.
Density Adjust copy density.
Background Removal Adjust the density of the background area for originals with colored back-
ground (newsprints, recycle paper, etc.) or originals on thin paper showing 
text or images from the back.
Select [Auto] for Background Removal Level to enable automatic back-
ground density adjustment for copying with the optimal background density.
For Background Removal, normally [Bleed Removal] is selected. However, 
when copying an original with colored background, select [Paper Discolor-
ation Adj] to make adjustment for background removal for copying.
Text  Enhancement Adjust the text reproduction level for an original with a photo overlapping the 
text (background text) to clarify the text on the background.
To emphasize the text on the background, press [Daker Text] to adjust the 
setting toward +.
To emphasize the background image, press [Lighter Text] to adjust the set-
ting toward -.
[Text Enhancement] can be configured when an item other than [Photo] is 
selected.
Glossy Makes copies with a glossy finish. Settings
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-20
5.4 Application5
5.4 Application
Configure the application settings for making copies.
Item
Sheet/Cover/Chapter 
InsertInserts another sheet of paper or adds a cover page to the paper 
for copying. You can also scan multiple copies of the original with 
different settings.p. 5-21
Edit  Color Inverts the contrast or gradation of the original or prints the original 
in the mirror image. It also adds a color in the background or adjust 
the quality of a color image. p. 5-29
Book Copy/Repeat Configure the settings for a book or catalog. An image on a single 
sheet of original can be repeatedly copied or divided and enlarged 
in parts to produce copies of the respective parts.p. 5-33
Page Margin Select the binding margin (blank area) of the paper used for copy-
ing.p. 5-37
Image  Adjust Configure the layout for the image when the paper is larger than the 
original.p. 5-39
Booklet Automatically arranges the page order of the scanned original and 
makes 2-sided 2 in 1 copies to produce a page layout for a center-
bound book, such as a magazine.p. 5-40
Erase Erases unnecessary outside portion of the original body text or 
erases the area outside the original placed on the original glass.p. 5-41
Stamp/Composition Prints the date/time, page number or a stamp printed on copies. 
This function also allows you to embed information for preventing 
unauthorized copying in a document.p. 5-43
Card  Copy Copies the contents of the front and back sides of a card-size orig-
inal, for example, insurance card, drivers license, or business card, 
on one sheet.p. 5-59
Save in User Box Saves the scanned original data in a User Box. p. 5-60
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-21
5.4 Application5
5.4.1 Sheet/Cover/Chapter Insert
OHP Interleave
Prevent copies printed onto OHP transparencies from sticking together because of the heat produced during 
copying by having paper (interleaves) inserted between the transparencies.
0Printing on OHP transparencies is possible only in black.
0Use interleaf paper with the same size as the OHP transparencies.
0The number of copies is fixed to one. You cannot change.
0The finishing function cannot be changed.
0Load transparencies into the bypass tray.
0Do not use a transparency that has been through the machine even once. It may lead to reduced print 
quality, a paper jam or a damage to the machine. (Even if a transparency has been discharged without 
printing, it cannot be reused.)
1Load the original.
2Press [Basic] ö [Color] ö [Black].
3Load transparencies into the bypass tray. Load the interleave paper into the desired paper tray.
4Set the paper type of the bypass tray to [Transparency] and press [OK].
5Press [Application] ö [Sheet/Cover/Chapter Insert] ö [OHP Interleave]. 
dReference
Setting Black for Color Settings:
Press [Basic] ö [Color] ö [Black].
Settings
Interleave Paper Select the paper tray loaded with paper with a transparency interleaf.
Transparency Indicates the paper size of the loaded transparency.
EFGH
EFGH
EFGH EFGH
EFGH
EFGHEFGH
EFGH
EFGH
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-22
5.4 Application5
Cover Sheet
Copies the front and back cover sheets onto separate paper when copying an original with a front/back cover 
sheet. When the original to copy does not have a front and back cover, you can insert blank sheets of paper 
as the front and back covers.
0Use paper of the same size for the body text and cover sheets, and ensure the same orientation of 
paper for both purposes.
%Press [Application] ö [Sheet/Cover/Chapter Insert] ö [Cover Sheet]. 
dReference
To configure the 2-sided copy mode:
Press [Basic] ö [Duplex/Combine].
Settings
None Disables copying of the front/back cover and blank sheet insertion.
Front (Copy) For 1-sided copy:
Copies the first page of the original onto paper for the front cover sheet.
For 2-sided copy:
Copies the second page of the original onto the back of the paper for the 
front cover sheet.
Front (Blank) Adds paper for the front cover sheet as the first page of the copy.
Back (Copy) For 1-sided copy:
Copies the last page of the original onto the back cover page.
For 2-sided copy:
Copies the last two pages of the original the 2-sided copy mode onto both 
sides of the paper for the back cover when copying an original with an even 
number of pages.
Back (Blank) Add paper for the back cover sheet to the last page of the copy.
Paper Select the paper tray loaded with the paper for the front/back cover page or 
blank cover pages.
You can select the paper tray of the Post Inserter when [Front(Blank)] or 
[Back(Blank)] is selected while the optional Post Inserter is installed.
4
43
32
21
1
REPORT
4
43
32
21
1
REPORTREPORT
4
43
32
22
21
1
REPORT
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-23
5.4 Application5
Insert Sheet
A different sheet of paper (such as colored paper) can be inserted as specified pages in the copies. You can 
select from two options: [Copy] and [Blank] to enable or disable copying to the inserted sheet.
0You can specify up to 30 positions for insert sheets.
0Use paper of the same size for the sheets to be inserted and for the original copies, and ensure the 
same orientation of paper for both.
%Press [Application] ö [Sheet/Cover/Chapter Insert] ö [Insert Sheet].
Settings
P --- Specify where to insert sheets of a different paper type.
Sort Sorts specified pages in the ascending order.
Insert  Paper Select the paper tray loaded with the paper to be inserted. You can select the 
paper tray of the Post Inserter when [Blank] is selected while the optional Post 
Inserter is installed.
Copy Copies the original with the specified paper inserted for the specified pages.
When setting the specified page to 2
For 1-sided copy:
Inserts the specified paper as the second page of the copies, and copies the 
second page of the original onto it.
For 2-sided copy:
Leaves the back side of the first page of the copy blank, inserts the specified 
paper for the second page of the copy, and makes a 2-sided copy of the sec-
ond and third pages of the original onto the inserted sheet.
6
64
452
23
6
65
54
43
32
21
1REPORT
6
65
54
43
32
21
1REPORT
1
1REPORT
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C652/C652DS/C552/C552DS/C4525-24
5.4 Application5
dReference
To configure the 2-sided copy mode:
Press [Basic] ö [Duplex/Combine].
Insert Image
A multi-page original scanned on the original glass can be inserted at the pre-set location in an original first 
scanned with the ADF.
0With the Insert Image function, the inserted original is added after the specified page.
0You can specify up to 30 positions for the original to be inserted.
0If the document scanned on the original glass has more pages than the number of pages specified in 
the Insert Image screen, the remaining pages of the inserted original are printed at the end of the 
original.
0The original on the original glass is scanned with the same settings as for the original scanned in the 
ADF.
0If the original scanned on the original glass has fewer pages than the number of pages specified in the 
Insert Image screen, the missing insertion pages will not be printed. 
0If the same page number is specified twice, two insertion original pages are added at the specified 
location.
0If the specified page number is greater than the total number of pages in the main original, the 
corresponding insertion original page is added at the end of the copy.
1Load the original into the ADF. Blank Select this option to insert the specified paper sheet after the page you have 
specified.
When setting the specified page to 3
For 1-sided copy:
Inserts the specified paper as the fourth page of the copy.
For 2-sided copy:
Leaves the back side of the second page of the copy blank, and inserts the 
specified paper for the third page of the copy. Settings
6
64
45
6
65
54
4
3
3
6
65
54
43
32
21
1REPORT
3
32
21
1REPORT
1
12REPORT
4
43
32
21
1
REPORT
BA
43
B
2
A11
REPORT
Downloaded From ManualsPrinter.com Manuals