Konica Minolta bizhub C35 User Manual

Loading Media
4-16
 Do not load so much 
paper that the top of the 
stack is higher than the 
maximum limit guide. Up 
to 100 sheets (80 g/m
2) of 
plain paper can be 
loaded into the tray at 
one time.
5Slide the media guides against 
the edges of the paper.
6Select [User Settings]/[Print Settin gs]/[Paper Settings]/[Paper Tray Set-
tings]/[Tray1] in the configuration menu, and then select the setting for the 
size and type of paper that are loaded. See also “[Paper]” on page 7-5.
Other Media
When...

Loading Media4-17
Loading Envelopes
1Open Tray 1.
2Slide the media guides to pro-
vide more space between them.
3Press down on the center of the 
paper-lifting plate until the left 
and right locking tabs (white) 
lock into place.
Downloaded From ManualsPrinter.com Manuals 

Loading Media 4-18
4Load the envelopes flap side up 
in the tray. 
Before loading enve-
lopes, press them down 
to make sure that all air is 
removed, and make sure 
that the folds of the flaps 
are firmly pressed; other-
wise the envelopes may 
become wrinkled or a 
media misfeed may 
occur.
Up to 10 envelopes can be loaded into the tray at one time.
For envelopes with the 
flap along the long edge 
(Envelope C6, Envelope 
Monarch, Envelope You 
#6, Envelope You #2, 
and Envelope DL), load 
the...

Loading Media4-19
6Select [User Settings]/[Print Settings]/[Paper Settings]/[Paper Tray Set-
tings]/[Tray1] in the configuration menu, and then select the setting for the 
size and type of paper that are loaded. See also “[Paper]” on page 7-5.
Loading Label Sheets/Letterhead/Postcards/Thick Stock 
and Glossy Media
1Open Tray 1.
2Slide the media guides to pro-
vide more space between them.
Downloaded From ManualsPrinter.com Manuals 

Loading Media
4-20
3Press down on the center of the 
paper-lifting plate until the left 
and right locking tabs (white) 
lock into place.
4Load the media face down in the 
tray.
 Up to 20 sheets can be 
loaded into the tray at 
one time.
5Slide the media guides against 
the edges of the media.
6Select [User Settings]/[Print Settin gs]/[Paper Settings]/[Paper Tray Set-
tings]/[Tray1] in the configuration menu, and then select the setting for the 
size and type of paper that are loaded. See also...

Loading Media4-21 Tray 2
Loading Plain Paper, Single Side Only and Special Paper
1Pull out Tray 2.
2Press down the media pressure 
plate to lock it into place.
3Slide the media guides to pro-
vide more space between them.
Downloaded From ManualsPrinter.com Manuals 

Loading Media 4-22
4Turn the paper selection dial to 
select the size of paper to be 
loaded.
5Load the paper face up in the 
tray.
Do not load above the  
mark. Up to 250 sheets 
(80 g/m2) of plain paper 
can be loaded into the 
tray at one time.
Downloaded From ManualsPrinter.com Manuals 

Loading Media4-23
6Slide the media guides against 
the edges of the paper.
7Close Tray 2.
8Select [User Settings]/[Print Settings]/[Paper Settings]/[Paper Tray Set-
tings]/[Tray2] in the configuration menu, and then select the setting for the 
size and type of paper that are loaded. See also “[Paper]” on page 7-5.
Downloaded From ManualsPrinter.com Manuals 

Loading Media 4-24
Loading Label Sheets/Letterhead/Postcards/Thick Stock 
and Glossy Media
1Pull out Tray 2.
2Press down the media pressure 
plate to lock it into place.
3Slide the media guides to pro-
vide more space between them.
Downloaded From ManualsPrinter.com Manuals 

Loading Media4-25
4Turn the paper selection dial to 
select the size of paper to be 
loaded.
5Load the paper face up in the 
tray.
Up to 20 sheets can be 
loaded into the tray at 
one time.
Downloaded From ManualsPrinter.com Manuals