Konica Minolta bizhub C35 User Manual

[Admin Settings] 3-54
[Text Printing] Specify settings for RGB text data.
[RGB Source] Settings [Device Color] / [sRGB]
Select the color space for RGB text data.
If [Device Color] is selected, no color space is 
specified.
RGB source profiles downloaded with Down-
load Manager or PageScope Web Connection 
are available as RGB Source.
[RGB Intent] Settings[Vivid] / [Photographic]
Select the characteristic applied when convert-
ing RGB text data to CMYK data.
[Vivid]: A vivid output is produced....

[Admin Settings]3-55
[RGB Gray] Settings [Bk=CMYK Gray=CMYK] / [Bk=K 
Gray=K] / [Bk=K Gray=CMYK]
Select how black and grays are reproduced in 
RGB graphics data.
[Bk=CMYK Gray=CMYK]: Black is reproduced 
using the CMYK colors.
[Bk=K Gray=K]: Black and gray are reproduced 
using black only.
[Bk=K Gray=CMYK]: Black is reproduced using 
only black.
[PS Settings] Specify settings for PostScript printing.
[Image Printing] Specify settings for RGB image data.
[RGB Source] Settings [Device Color] / [sRGB] /...

[Admin Settings] 3-56
[RGB Gray] Settings [Bk=CMYK Gray=CMYK] / [Bk=K 
Gray=K] / [Bk=K Gray=CMYK]
Select how black and grays are reproduced in 
RGB image data.
[Bk=CMYK Gray=CMYK]: Black is reproduced 
using the CMYK colors.
[Bk=K Gray=K]: Black and gray are reproduced 
using black only.
[Bk=K Gray=CMYK]: Black is reproduced using 
only black.
[Destination Pro-
file]Settings[Auto]
Select the destination profile.
[Auto]: A destination profile that the machine 
automatically adapts is selected based on a...

[Admin Settings]3-57
[RGB Intent] Settings[Vivid] / [Photographic] / [Relative 
Color] / [Absolute Color]
Select the characteristic applied when convert-
ing RGB text data to CMYK data.
[Vivid]: A vivid output is produced.
[Photographic]: A brighter output is produced.
[Relative Color]: Relative color is applied to the 
RGB source profile.
[Absolute Color]: Absolute color is applied to 
the RGB source profile.
[RGB Gray] Settings [Bk=CMYK Gray=CMYK] / [Bk=K 
Gray=K] / [Bk=K Gray=CMYK]
Select how black...

[Admin Settings] 3-58
[Graphics Printing] Specify settings for RGB graphics data.
[RGB Source] Settings [Device Color] / [sRGB] / 
[AppleRGB] / [AdobeRGB1998] / 
[ColorMatchRGB] / [BlueAdjus-
tRGB]
Select the color space for RGB graphics data.
If [Device Color] is selected, no color space is 
specified.
RGB source profiles downloaded with Down-
load Manager or PageScope Web Connection 
are available as RGB Source.
[RGB Intent] Settings[Vivid] / [Photographic] / [Relative 
Color] / [Absolute Color]
Select...

[Admin Settings]3-59
[Destination Pro-
file]Settings[Auto]
Select the destination profile.
[Auto]: A destination profile that the machine 
automatically adapts is selected based on a 
combination of the specified color matching, 
halftones and other profiles.
Destination profiles downloaded with Down-
load Manager or PageScope Web Connection 
are available as Destination Profile.
[Simulation] Specify settings for the simulation profile.
[Simulation Pro-
file]Settings[NONE] / [SWOP] / [Euroscale] /...

[Admin Settings] 3-60
[Gradation Adjustment] Specify settings for gradation level adjust-
ments.
[Tone Calibration] Settings[ON] / [OFF]
[ON]: Image adjustments are applied.
[OFF]: Image adjustments are not applied.
[AIDC Process] Settings [Execute] / [Cancel]
[Execute]: Image adjustments are performed 
immediately.
[Cancel]: Image adjustments are not per-
formed.
AIDC processing consumes toner.
[CMYK Density] Specify fine adjustment settings for cyan, 
magenta, yellow and black.
[Cyan]/
[Magenta]/...

[Admin Settings]3-61
[PS] Specify settings for PostScript errors and data 
transmissions.
[Wait Timeout] Settings 0 to 300 (Default: 0)
Specify the time until an error is determined to 
be a PostScript error.
If [0] is selected, no timeout is performed.
[Print PS Errors] Settings [ON] / [OFF]
Select whether or not an error page is printed 
when a Postscript error occurs.
[PS Protocol] Settings[Auto] / [Normal] / [Binary]
Select the protocol for data transmissions with 
a PostScript data stream.
If [Auto]...

[Admin Settings] 3-62
[Font Setting] Specify font settings for the PCL language.
[Font Number] Settings 0 to 102 (Default: 000)
Specify the default font in the PCL language.
The font numbers that appear correspond to 
the PCL font list.
For details on printing the font list, refer to 
“[Print Settings]” on page 3-17.
[Pitch Size] Settings 0.44 to 99.99 (Default: 10.00)
Specify the font size in the PCL language.
If the setting selected for [Font Number] is for a 
bitmap font, [Pitch Size] appears. If the...

[Admin Settings]3-63 [Fax Settings]
Specify the fax settings. For details on specifying the fax settings, refer to the 
[Facsimile User’s Guide].
[Maintenance Menu]
All factory default values are shown in bold. [XPS] Specify XPS settings.
[Digital Signature] Settings [Enable] / [Disable]
Select whether or not to enable XPS digital sig-
natures.
[Enable]: XPS digital signatures are enabled.
[Disable]: XPS digital signatures are disabled.
[Print XPS Errors] Settings[ON] / [OFF]
Select whether or not an...