Konica Minolta bizhub C35 User Manual

[Admin Settings] 3-44
[Authentication Setting]
All factory default values are shown in bold. [Group] Specify settings for printing the list of group 
destinations.
[Start Number]: Specify the starting group des-
tination number.
[Number of Addresses]: Specify the number of 
group destinations.
[List Output]: Prints the list of group destina-
tions.
[Program] Specify settings for printing the list of program 
destinations.
[Fax]/[E-mail]/[FTP]/
[WebDAV]/[SMB]/
[Internet Fax]/
[Address Book]/
[Group...

[Admin Settings]3-45 [Ethernet]
All factory default values are shown in bold.
Item Description
[TCP/IP] Specify network settings for the machine.
[Enable] Settings[ON] / [OFF]
Select the setting for connecting to this 
machine through a network.
If [OFF] is selected, the TCP/IP 
parameters do not appear.
[IP Address] Settings [0.0.0.0]
Specify the IP address used by this machine on 
the network.
[Subnet Mask] Settings [0.0.0.0]
Specify the subnet mask.
[Gateway] Settings [0.0.0.0]
Specify the gateway...

[Admin Settings] 3-46
[Telnet] Settings[Enable] / [Disable]
Select whether or not to enable Telnet trans-
missions.
[Bonjour] Settings[Enable] / [Disable]
Select whether or not to enable Bonjour.
[Dynamic DNS] Settings [Enable] / [Disable]
Select whether or not to enable Dynamic DNS.
[IPP] Settings[Enable] / [Disable]
Select whether or not to enable IPP.
[RAW Port] Specify the RAW port settings.
[Enable] Settings[Yes] / [No]
Select whether or not to enable the RAW port.
[Bidirectional] Settings [ON] /...

[Admin Settings]3-47
[IPv6] Specify IPv6 settings.
[Enable] Settings[ON] / [OFF]
Select whether or not to enable IPv6.
[Auto Setting] Settings[Enable] / [Disable]
Select whether or not to enable the IPv6 auto 
setting.
[Link Local] Displays the link-local address.
[Global Address] Displays the global address.
[Gateway Address] Displays the gateway address.
[Netware] Settings [Enable] / [Disable]
Select whether or not to enable NetWare.
[AppleTalk] Settings[Enable] / [Disable]
Select whether or not to...

[Admin Settings] 3-48
[External Memory Print]
[Job Timeout]
[Copy Settings]
All factory default values are shown in bold. [Auto. Obtain Certifi-
cates]Settings [Yes] / [No]
Select whether or not to automatically obtain 
certificates.
[Print S/MIME Informa-
tion]Settings [Yes] / [No]
Select whether or not to print S/MIME informa-
tion.
Description
Settings[Enable] / [Disable]
Select whether or not to enable the External Memory Print 
function.
Description
Settings 5 to 300(Default:15)
Specify the length...

[Admin Settings]3-49 [Print Settings]
All factory default values are shown in bold.
Item Description
[Startup Page Setting] Settings [ON] / [OFF]
Select whether or not a startup page is printed 
when the machine is turned on.
[Auto Continue] Settings [ON] / [OFF]
Select whether or not printing continues when 
a size error occurs during printing.
Downloaded From ManualsPrinter.com Manuals 

[Admin Settings] 3-50
[Paper] Specify settings for the paper used for printing.
[Default Paper] Specify settings for the paper that is normally 
used.
[Paper Size] Settings[Letter] / [Legal] / [Executive] / [A4] 
/ [A5] / [A6] / [B5 (JIS)] / [B6] / [Govt 
Letter] / [Statement] / [Folio] / [SP 
Folio] / [UK Quarto] / [Foolscap] / 
[Govt Legal] / [16K] / [4×6] / [Kai 16] 
/ [Kai 32] / [Env C6] / [Env DL] / 
[Env Monarch] / [Env Chou#3] / 
[Env Chou#4] / [B5 (ISO)] / 
[Env#10] / [J Postcard] / [J Post-...

[Admin Settings]3-51
[Measurement Unit Set-
ting]Settings[Inch] / [mm]
Select the measurement units.
[Hold Job Timeout] Settings[Disable] / [1 Hour] / [4 Hours] / [1 
Day] / [1 Week]
Specify the length of time until print jobs saved 
on the hard disk are deleted. If [Disable] is 
selected, print jobs are not deleted at a specific 
time.
[Quality Settings] Specify settings for the print quality.
[Color Mode] Settings[Color Mode] / [Gray Scale]
[Color Mode]: The pages are printed in full 
color.
[Gray...

[Admin Settings] 3-52
[Graphics Printing] Settings [Line Art] / [Detail] / [Smooth]
Select how halftones in graphics are repro-
duced.
[Line Art]: Halftones are reproduced with high 
precision.
[Detail]: Halftones are reproduced with detail.
[Smooth]: Halftones are reproduced with 
smoothness.
[Edge Enhancement] Select how edges in images, text and graphics 
are emphasized.
[Image Printing] Settings [ON] / [OFF]
Select whether image edges are emphasized.
[ON]: The edges are emphasized.
[OFF]: The edges...

[Admin Settings]3-53
[Economy Print] Settings [ON] / [OFF]
Select whether to print graphics with a reduced 
density by reducing the amount of toner that is 
used.
[ON]: The amount of toner used is reduced 
when printing.
[OFF]: The amount of toner used is not 
reduced when printing.
[PCL Settings] Specify settings for PCL printing.
[Contrast] Settings -15 to 15%(Default: 0%)
The contrast of the image can be adjusted.
[Image Printing] Specify settings for RGB image data.
[RGB Source] Settings [Device...