Konica Minolta bizhub C35 User Manual

[Admin Settings] 3-64
[Halftone 256] Settings[Print] / [Cancel]
Prints the halftone pattern using a 100% den-
sity for each CMYK color.
[Cyan 256]/
[Magenta 256]/
[Yellow 256]/
[Black 256]
[Gradation] Settings[Print] / [Cancel]
Prints the gradation pattern.
[Activity Report] Settings[Print] / [Cancel]
Prints the communications activity report.
[Scan Send Report 
Print]Settings[Print] / [Cancel]
Prints the scanning operations activity report.
[Scan Event Log] Settings[Print] / [Cancel]
Prints the scanning...

[Admin Settings]3-65
[Tray2] Settings -15 to 15
Adjust the left margin of media fed from Tray 2 
for simplex (single-sided) printing.
[Tray3] Settings -15 to 15
Adjust the left margin of media fed from Tray 3 
for simplex (single-sided) printing.
[Tray4] Settings -15 to 15
Adjust the left margin of media fed from Tray 4 
for simplex (single-sided) printing.
[Left ADJ Duplex] Adjust the left margin for media fed from each 
paper tray with duplex (double-sided) printing.
[Tray1] Settings -15 to 15
Adjust...

[Admin Settings] 3-66
[Thick 2] Settings -8 to 7
Adjust the 2nd image transfer output (ATVC) 
for simplex (single-sided) printing of Thick 2 
paper.
[Postcard] Settings -8 to 7
Adjust the 2nd image transfer output (ATVC) 
for simplex (single-sided) printing of postcards.
[Envelope] Settings -8 to 7
Adjust the 2nd image transfer output (ATVC) 
for simplex (single-sided) printing of envelopes.
[Label] Settings -8 to 7
Adjust the 2nd image transfer output (ATVC) 
for simplex (single-sided) printing of...

[Admin Settings]3-67
[Postcard] Settings -8 to 7
Adjust the 2nd image transfer output (ATVC) 
for printing on the back side of postcards that 
has already been printed on.
[Envelope] Settings -8 to 7
Adjust the 2nd image transfer output (ATVC) 
for printing on the back side of envelopes that 
has already been printed on.
[Label] Settings -8 to 7
Adjust the 2nd image transfer output (ATVC) 
for printing on the back side of labels that has 
already been printed on.
[Glossy 1] Settings -8 to 7
Adjust the...

[Admin Settings] 3-68
[Fine Line ADJ] Settings -3 to 2 (Default: 0)
Adjust how fine lines are reproduced by chang-
ing the applied voltage (VC) to the electrostatic 
roller.
[AIDC Mode] Settings [Mode 1] / [Mode 2]
Select the AIDC operation mode.
[Mode 1]: Standard mode
[Mode 2]: Low mode
[Thick Mode] Settings[Quality Mode] / [Speed Mode]
In order to prevent toner from clogging within 
the developer unit as a result of it being driven 
at half-speed, select the timing for driving the 
developer unit at...

[Admin Settings]3-69
[Folder Settings]

All factory default values are shown in bold.
[Main Scan Adjust] Adjust the scanning settings.
[Main Scan Page] Settings [Print] / [Cancel]
Print the test pattern for fine adjustment of the 
color ratios in the main scanning direction.
[Scan Adjust Value] Specify color  adjustments for yellow, magenta 
and cyan.
[Yellow] Settings -42 to 42 (Default:  0)
Finely adjust the ratio of yellow in the main 
scanning direction.
[Magenta] Settings -42 to 42 (Default:  0)...

[Admin Settings]
3-70
[Security Settings]
 All factory default values are shown in bold.
[Auto Document Delete 
Time]
Settings [Erase Disabled] / [12 Hours] / 
[1 
Day]  / [2 Days] / [3 Days] / [7 Days] 
/ [30 Days]
Select the time period after which to automati-
cally delete each file saved on the hard disk 
using the Scan to HDD function.
[Document Hold Setti ng] Settings [Enable] /  [Disable]
Select whether or not a file is deleted after it is 
retrieved.
Item Description
[Administrator Password]...

[Admin Settings]3-71
[Manual Destination 
Input]Settings[Allow] / [Restrict]
Select whether or not to prohibit manual input 
of a destination. If [Restrict] is selected, desti-
nations for fax and scan operations cannot be 
entered directly.
[Hide Personal Data] Settings [ON] / [OFF]
Select whether or not to display transmission 
destinations in the job log. If [ON] is selected, 
transmission destinations are not displayed.
[Disable Job History 
Display]Settings [ON] / [OFF]
Select whether or not to...

[Admin Settings] 3-72
[Mode] Settings[Mode 1] / [Mode 2] / [Mode 3] / 
[Mode 4] / [Mode 5] / [Mode 6] / 
[Mode 7] / [Mode 8]
Select the method for overwriting the data on 
the hard disk.
[Mode 1]: Overwritten with 0x00
[Mode 2]: Overwritten with 1-byte random num-
bers   Overwritten with 1-byte random num-
bers   Overwritten with 0x00
[Mode 3]: Overwritten with 0x00   Overwritten 
with 0xff   Overwritten with 1-byte random 
numbers  Verified
[Mode 4]: Overwritten with 1-byte random num-
bers...

[Admin Settings]3-73
[Execute] Press to delete all data on the hard disk by 
overwriting it, and then press [OK].
Perform this operation when disposing 
of this machine.
While the data is being deleted by being 
overwritten, do not use the power switch 
to turn the machine off and on.
After the machine is restarted, all data is 
deleted by being overwritten.
The following data is deleted.
– Registered user and account data
– Registered information for secured print-
ing and saved files
– Image files...