Konica Minolta bizhub C35 User Manual

Print Media 4-6
Envelope
Print on the front (address) side only. Some parts of the envelope consist of 
three layers of paper—the front, back, and flap. Anything printed in these lay-
ered regions may be lost or faded.
You can print continuously with envelope. However, this could affect the 
media feed, depending on the media quality and printing environment. If 
problems occur, stop the continuous printing and print one sheet at a time.
Use envelopes that are
„Common office envelopes approved for laser...

Print Media4-7
Label
A sheet of labels consists of a face sheet (the printing surface), adhesive, and 
a carrier sheet:
„The face sheet must follow the plain paper specification.
„The face sheet surface must cover the entire carrier sheet, and no adhe-
sive should come through on the surface.
You can print continuously with label sheets. However, this could affect the 
media feed, depending on the media quality and printing environment. If 
problems occur, stop the continuous printing and print one sheet...

Print Media 4-8
„Are precut or perforated
Letterhead
You can print continuously with letterhead. However, this could affect the 
media feed, depending on the media quality and printing environment. If 
problems occur, stop the continuous printing and print one sheet at a time.
Check your application documentation for more information on printing 
letterhead.
Postcard
You can print continuously with postcard. However, this could affect the 
media feed, depending on the media quality and printing...

Print Media4-9
Use postcards that are
„Approved for laser printing
DO NOT use postcards that are
„Coated
„Designed for inkjet printers
„Precut or perforated
„Preprinted or multicolored
If the postcard is warped, press on the warped 
area before putting it in the tray 1/2.
„Folded or wrinkled
Glossy Media
You can print continuously with glossy media. However, this could affect the 
media feed, depending on the media quality and printing environment. If 
problems occur, stop the continuous printing and...

Print Media 4-10
Single Side Only
Print on the single side only.
You can print continuously with single side only paper. However, this could 
affect the media feed, depending on the media quality and printing environ-
ment. If problems occur, stop the continuous printing and print one sheet at a 
time.
Select this setting when paper that should not be used with double sided 
copying (for example, when on side has already been printed on) is loaded as 
plain paper with a weight of 60–90 g/m².
Use single...

Print Media4-11 Special Paper
You can print continuously with special paper. However, this could affect the 
media feed, depending on the media quality and printing environment. If 
problems occur, stop the continuous printing and print one sheet at a time.
Select this setting when special paper, for example, color high-quality paper 
(color paper), is loaded as plain paper with a weight of 60–90 g/m².
Use special paper that is
„Approved for laser printers
DO NOT use special paper that is
„Not approved...

Print Media 4-12
Printable Area
The printable area on all media sizes is 
up to 4.2 mm (0.165) from the edges 
of the media.
Each media size has a specific image-
able area, the maximum area on which 
the printer can print clearly and without 
distortion. 
This area is subject to both hardware 
limits (the physical media size and the 
margins required by the printer) and 
software constraints (the amount of 
memory available for the full-page frame buffer). The guaranteed imageable 
(printable) area for...

Print Media4-13 Envelopes
Envelopes can only be printed on their front sides (side where the recipient’s 
address is written). In addition, printing on the front side in the area overlap-
ping the back flap cannot be guaranteed. The location of this area differs 
depending on the envelope type.
The envelope print orientation is determined by your application.
Page Margins
Margins are set through your application. Some applications allow you to set 
custom page sizes and margins while others have only...

Loading Media 4-14
Loading Media 
How do I load media?
Note
Do not mix media of different types and sizes, as this will cause media 
misfeeds or machine trouble.
Note
Paper edges are sharp and may cause injuries.
When refilling media, first remove any media remaining in the tray. Stack it 
with the new media, even the edges, then reload it. 
Tray 1 (Manual Feed Tray)
For details on the types and sizes of media that can be printed from Tray 1, 
refer to “Specifications” on page 4-2.
Loading Plain Paper,...

Loading Media4-15
2Slide the media guides to pro-
vide more space between them.
3Press down on the center of the 
paper-lifting plate until the left 
and right locking tabs (white) 
lock into place.
4Load the paper face down in the 
tray.
Downloaded From ManualsPrinter.com Manuals