Konica Minolta bizhub C35 User Manual

[Finishing] 7-10
[Finishing]
Specify any settings for finishing outputted copies.
[Proof Copy]
Before printing a large number of copies, a single finished proof copy can be 
printed in order to be checked. Select whether or not to print a proof copy.
Proof Copy operation
When printing a proof copy, specify multiple copies.
1In the home screen, press [Copy].
2Place the document on the original glass or load it into the ADF.
For details on positioning the document, refer to “Placing a document 
on the...

[Separate Scan]7-11
5Press [ON].
6Press [OK].
7Press the [Start (Color)] key or the [Start (B&W)] key.
A single proof copy is printed.
8Check the proof copy.
If the proof copy was printed as desired, continue with step 9.
Using the keypad, the number of copies can be changed.
To print another proof copy, press [Proof Copy].
To change the settings, press [Cancel], and then perform steps 2 
through 8.
9Press [Print].
The remaining number of copies is printed.
[Separate Scan]
The scan operation can be...

[Separate Scan] 7-12
Scanning the document in separate batches
Do not load more pages into the ADF than the maximum number of 
pages allowed, otherwise a document misfeed or damage to the docu-
ment may occur.
When sorting or making double-sided or combined copies using the 
original glass, instead of using the Separate Scan operation, the docu-
ment can be scanned as a multiple-page document.
1In the home screen, press [Copy].
2Place the document on the original glass or load it into the ADF.
For...

[ID Copy]7-13
[ID Copy]
The back and front of a card, such as an insurance card, driver’s license or 
business card, can be scanned separately and printed together on a single 
page.
With the ID Copy operation, the zoom ratio is set to 100%.
The paper sizes that are available for copying are Letter, Legal and 
A4.
The card can only be placed on the original glass. Position the card to 
be scanned aligned at the upper-left corner of the original glass. Since 
the image is printed 4 mm from the top and...

[Paper Margin] 7-14
[Paper Margin]
Copies can be printed with a binding margin so they can easily be stored in 
filing binders.
If part of the image is lost due to the binding margin setting, reduce the 
zoom ratio before printing copies. Item Description
[+]/[-] Specify the width of the binding margin between 
0.1 mm and 20.0 mm (0.001 inches and 0.787 
inches).
[None] Select this setting to leave no binding margin.
Downloaded From ManualsPrinter.com Manuals 

[Image Quality]7-15
[Image Quality]
The quality can be adjusted for the document to be scanned.
Item Description
[Background removal] Adjust the background density when copying docu-
ments with a colored background (such as newspa-
pers or recycled paper) or thin documents where 
the back side is visible from the front side.
Adjust the background density to one of nine lev-
els. Select a setting in the + direction to darken the 
background, or select a setting in the - direction to 
lighten the...

[Image Quality] 7-16
Downloaded From ManualsPrinter.com Manuals 

8Additional copy
operations
Downloaded From ManualsPrinter.com Manuals 

Interrupting a copy job 8-2
Interrupting a copy job
The current jobs can be temporarily interrupted so a document can be copied 
with different copy settings.
This is convenient for quickly making a copy.
The [Interrupt] key cannot be pressed while a document is being 
scanned.
When the [Interrupt] key is pressed, the copy settings return to their 
defaults.
1In the home screen, press [Copy].
2Place the document on the original glass or load it into the ADF.
For details on positioning the document,...

Copy programs8-3
Copy programs
Frequently used copy settings can be stored together as a program to easily 
be recalled later.
Storing a copy program
A maximum of 15 copy programs can be stored.
1In the home screen, press [Copy].
2Specify the copy settings.
3Press the [Mode Memory] key.
The copy programs screen appear.
4Press [Register].
5Press [Name].
6Type in the name of the copy program, and then press [OK].
For details on entering text, refer to “Entering text” on page A-8.
7Press [OK].
8Press...