Konica Minolta bizhub C35 User Manual

Copy programs 8-4
Copying using stored settings (copy programs)
1In the home screen, press [Copy].
2Place the document on the original glass or load it into the ADF.
For details on positioning the document, refer to “Placing a document 
on the original glass” on page 4-36 and “Loading a document into the 
ADF” on page 4-37.
3Press the [Mode Memory] key.
The copy programs screen appear.
4Select the copy program to be recalled.
5Press [Detail].
The settings screen appears.
6Check the copy settings stored...

9Scanning From a
Computer
Application
Downloaded From ManualsPrinter.com Manuals 

Basic Scanning Operation 9-2
Basic Scanning Operation
Documents can be scanned from a computer connected to this machine via a 
network. Scanning settings can be specified and the scanning operation can 
be performed from TWAIN- or WIA-compatible applications. From the scan-
ner driver, a preview can be displayed and various adjustments, such as the 
size of the scan area, can be specified.
For details on the installation of the scanner driver or network TWAIN 
settings, refer to the Installation Guide...

Windows TWAIN Driver Settings9-3
Windows TWAIN Driver Settings
Mode settings
„[Mode Settings]
Select [Basic Mode] for specifying basic settings, or select [Advanced Mode] 
for specifying detailed settings.
The settings that can be specified differ for each mode.
When [Basic Mode] is selected
The following parameters can be set when [Basic Mode] is selected.
„[Help] icon
Click to display Help information.
„[About] icon
Click to display the software version information.
„[Scan Objective]
Specify the...

Windows TWAIN Driver Settings 9-4
If the [Rotate back side] check box is selected, the back side of the 
image is rotated 180° and scanned. (Applies only if [ADF (2-sided)] is 
selected.)
„[Image size]
Shows the data size of the scan image.
„[Close]
Click to close the TWAIN driver window.
„[Prescan]
Click to begin scanning a preview image.
„[Scan]
Click to begin scanning.
„[Clear] icon
Click to erase the preview image.
When [Advanced Mode] is selected
The following parameters can be set when [Advanced...

Windows TWAIN Driver Settings9-5
„[Resolution]
Specify the resolution.
„[Scale]
Specify the enlargement or reduction ratio for the selected area.
If the resolution is set at 1200 × 1200dpi or higher, a setting larger 
than 100% cannot be specified.
„Scanning Mode
Select [Auto] or [Manual]. When [Manual] is selected, a tab appears so that 
detailed settings can be specified, for example, for [Brightness/Contrast], [Fil-
ter], [Curves], [Levels], [Color Balance], and [Hue/Saturation].
The parameters that...

Windows TWAIN Driver Settings 9-6
„[Zoom Prescan] icon
Click to rescan the area selected in the preview window and enlarge it to fit 
the window.
„[Mirror] icon
Click to display a mirror image of the preview image.
„[Tone Reversal] icon
Click to reverse the colors of the preview image.
„[Clear] icon
Click to erase the preview image.
„[Preview] window
Displays a preview image. Drag the rectangle over the image to select an 
area.
„[Before (RGB)]/[After]
Move the pointer in the preview window to display...

Windows WIA Driver Settings9-7
Windows WIA Driver Settings
„[Paper source]
Select the paper source.
„[Color picture]
Select this setting when scanning in color.
„[Grayscale picture]
Select this setting when scanning in grayscale.
„[Black and white picture or text]
Select this setting when scanning in black and white.
„[Custom Settings]
Select this setting when scanning with [Adjust the quality of the scanned pic-
ture] settings applied.
If settings have been specified with [Adjust the quality of the...

Macintosh TWAIN Driver Settings 9-8
Macintosh TWAIN Driver Settings
Mode settings
„[Mode Settings]
Select [Basic Mode] for specifying basic settings, or select [Advanced Mode] 
for specifying detailed settings.
The settings that can be specified differ for each mode.
When [Basic Mode] is selected
The following parameters can be set when [Basic Mode] is selected.
„[Help] icon
Click to display Help information.
„[About] icon
Click to display the software version information.
„[Scan Objective]
Specify the...

Macintosh TWAIN Driver Settings9-9
If the [Rotate back side] check box is selected, the back side of the 
image is rotated 180° and scanned. (Applies only if [ADF (2-sided)] is 
selected.)
„[Image size]
Shows the data size of the scan image.
„[Close]
Click to close the TWAIN driver window.
„[Prescan]
Click to begin scanning a preview image.
„[Scan]
Click to begin scanning.
„[Clear] icon
Click to erase the preview image.
When [Advanced Mode] is selected
The following parameters can be set when [Advances...