Konica Minolta bizhub 131f User Manual

							Layout and installation3
bizhub 131f/190f 3-35
2
Note
Be sure to use a shielded USB cable. Use of an unshielded cable may re-
sult in radio interference.
2Turn your machine on.
3The driver software will be installed automatically.
4When the drivers have been installed correctly, the message Your de-
vices are ready to use will appear.
2
Note
After the driver installation, you need to configure the Device Option 
setting to activate either or both the 2nd Paper Cassette or/and Duplex 
Unit (The Duplex Unit is available only for bizhub 190f.) See Activating 
your device option(s) on the next page for instructions on how to do this.
Activating your device option(s)
If your machine has device options, you must open the printing preferences 
and activate them.
To activate the device option(s):
1Click [Start] % [Control Panel].
2Click [Hardware and Sound].
3Click [Printers].
4Right-click the KONICA MINOLTA GDI printer icon, then click [Printing 
Preferences...].
5Click the [Device Option] tab.
6Select the device(s) installed on your machine.
7Click [OK] and close the printing preferences.
2
Note
The duplex unit is available only for bizhub 190f.
Downloaded From ManualsPrinter.com Manuals 
						

							3Layout and installation
3-36 bizhub 131f/190f
3.6.3 Local install: Windows Parallel port (option)
2
Note
The optional parallel interface is required.
A parallel interface available only for using, Windows 98/98SE, Windows 
Me and Windows NT 4.0 workstation. 
For Windows NT 4.0, you need to log on as an administrator.
If you have previously installed the KONICA MINOLTA 131f/190f GDI 
Printer/Scanner Driver, you can update it by simply clicking a [Update] 
button on the maintenance window.
1Turn on your computer.
2Insert the supplied CD into your CD-ROM drive.
2
Note
If this window does not appear, run the setup.exe located on the root 
directory of the supplied CD-ROM.
3Choose your language, then click [Next].
4On the next window, click [Next].
5The Software License Agreement window appears. After reading and 
accepting the contents, click [Yes].
6Select your machine and click [Next].
7Select the Parallel and click [Next].
Confirm the displayed contents.
Click [Next] to start installing on your computer.
8When the next window appears, click [Finish] to complete installation.
If an error message appears during the installation process, you will have to 
uninstall it. (See page 3-37.)
Downloaded From ManualsPrinter.com Manuals 
						

							Layout and installation3
bizhub 131f/190f 3-37Activating your device option(s)
If your machine has device options, you must open the printer properties and 
activate them. See page 3-29 for instructions on how to do this.
3.6.4 Uninstalling the driver
Uninstall is required if you are upgrading the software or if your installation 
fails.
2
Note
For Windows NT4.0/2000/XP/Server 2003/Vista, you need to log on as an 
administrator.
For Windows 98/98SE and Windows Me
1Select Start, Settings, Control Panel, Add/Remove Programs and 
the Install/Uninstall tab.
2Select KONICA MINOLTA 131f/190f GDI Printer/Scanner Driver and 
click the [Add/Remove] button.
3Follow the instructions that appear on the window.
For Windows 2000 Professional
1Select Start, Settings, Control Panel and Add/Remove Pro-
grams and Change or Remove Programs icon.
2Select KONICA MINOLTA 131f/190f GDI Printer/Scanner Driver and 
click the [Change/Remove] button.
3Follow the instructions that appear on the window.
Downloaded From ManualsPrinter.com Manuals 
						

							3Layout and installation
3-38 bizhub 131f/190fFor Windows XP and Windows Server 2003
1Select Start, Control Panel, Add or Remove Programs and the 
Change or Remove Programs icon.
2Select KONICA MINOLTA 131f/190f GDI Printer/Scanner Driver and 
click the [Change/Remove] button.
3Follow the instructions that appear on the window.
For Windows Vista
1Select [Start], [Control Panel], [Programs], [Programs and Features].
2Select KONICA MINOLTA 131f/190f GDI Printer/Scanner Driver and 
click the [Uninstall] button.
3Follow the instructions that appear on the window.
Downloaded From ManualsPrinter.com Manuals 
						

							4Getting started
Downloaded From ManualsPrinter.com Manuals 
						

							Downloaded From ManualsPrinter.com Manuals 
						

							Getting started4
bizhub 131f/190f 4-3
4 Getting started
4.1 Operating tips
4.1.1 Switching the machine mode
To switch the machine mode, press the Copy/Fax/Scan button.
The mode light indicates the current mode machine is in.
2
Note
You cannot switch the mode in any of the following cases:
When scanning a document.
During the realtime transmission.
When programming any function settings.
Downloaded From ManualsPrinter.com Manuals 
						

							4Getting started
4-4 bizhub 131f/190f
4.1.2 Entering character
Some settings give you a chance to enter characters; for your TTI (your 
name), remote fax’s name or others. To enter letters or other characters, use 
the following guidelines:
By pressing the numeric key repeatedly, you can access the following char-
acters as shown in the table below.
Character Table
When you want to enter a character that shares the same numeric key, press 
[)] to move the cursor to the right.
Numeric keypadCharacter
1 . @ - _ , / : & ‘ o ! ?
Note: o means space
A B C 2
D E F 3
G H I 4
J K L 5
M N O 6
P Q R S 7
T U V 8
W X Y Z 9
0
Special Characters
Caps Lock
Downloaded From ManualsPrinter.com Manuals 
						

							Getting started4
bizhub 131f/190f 4-5To change upper and lower case
Press [#] key to toggle upper case and lower case.
The word Upper means the machine will enter only upper-case letters.
The word Lower means the machine will enter only lower-case letters.
Entering the symbol
You can also enter special characters or symbols.
1When the machine prompts you to 
enter a name, press [1] key.
The LCD changes to:
2Select the character you want to enter using [*], [)], [+] or [,] key.
3To enter the character, press [Enter] key.
4If you want to enter other character, repeat steps 1 to 3.
Otherwise, go to next step.
5Press [Enter] to save it.
Correct the character
If you entered an incorrect letter or digit, press [Cancel] to erase to the left.
To change just one character or digit, press [*] or [)] to move the cursor to 
that character or digit. Then press [Cancel] to erase it. Re-enter the character 
or digit correctly.
Downloaded From ManualsPrinter.com Manuals 
						

							4Getting started
4-6 bizhub 131f/190f
4.1.3 Memory back-up [CD]
For further information, see “4 Getting started” in the extended manual 
on the CD-R.
4.1.4 How to select the function [CD]
For further information, see “4 Getting started” in the extended manual 
on the CD-R.
4.1.5 Function table [CD]
For further information, see “4 Getting started” in the extended manual 
on the CD-R.
Downloaded From ManualsPrinter.com Manuals