Key System U.S. Atlas Avm Jr Installation Programming Instruction Manual

 DTMF Programming  
Atlas AVM JR. Installation and Programming Manual 3-7 OPERATION COMMAND DEFAULT Delete a specific 
procedural code *380 + X + # 
 
X = 1; LED 1 notification code 
X = 2; LED 2 notification code 
X = 3; LED notification off code 
X = 4; Transfer code 
X = 5; Recall from Busy 
X = 6; Recall from No Answer  Answer number of 
samples *386 + X 
Where: 
X = number of samples (0-9) 5 1
 Refers to Key System codes. Each code contains digits 0-9, *, #, Flash-1, 
 Flash-2, Pause and Extension...

DTMF Programming  
3-8 Atlas AVM JR. Installation and Programming Manual 3.4 3.4   Setting the Time and Date Setting the Time and Date   
Table 3-2 presents commands used to set the AVM JR. clock and calendar. 
Table 3-2 Commands to Set the AVM JR. Clock and Calendar OPERATION COMMAND Setting the time and day of the week 
*420 + HH + MM 
where 
  
HH = hour (00-23) 
MM = minutes (00-59) 
Example: *420 15 25 stands for 3:25 P.M.  Setting the date 
*430 + DD + MM + YY 
where 
DD = date of the month (01-31)...

 DTMF Programming  
Atlas AVM JR. Installation and Programming Manual 3-9 Table 3-3 Programming the Operational Modes OPERATION COMMAND Selecting an Operational 
Mode *400 + X  
where X stands for the operational mode. 
Day mode = 0 (default mode) 
Night mode = 1 
Holiday mode = 2 
Auto mode = 3 
Break mode = 4 Selecting time stamp format (Applicable to English only) *410 + X 
where 
X = 0 means the time stamp is in 12-hour format (default) 
X = 1 means the time stamp is in 24-hour format Setting the...

DTMF Programming  
3-10 Atlas AVM JR. Installation and Programming Manual OPERATION COMMAND Setting the Break Time 
(for Auto mode only) *460 + D + HH MM + HH MM 
where 
D is the day of the week (1-7)1
 
First HH MM = start of break time 
Second HH MM = end of break time 
Repeat for all days of the week. 
Example 1: *460 1 13 15 14 30 
AVM JR. will play the Break mode opening 
greeting (script message 15) on Monday, from 
13:15 until 14:30. 
Note: Day 1 is Monday day 2 is Tuesday day 3 is 
Wednesday day...

 DTMF Programming  
Atlas AVM JR. Installation and Programming Manual 3-11 OPERATION COMMAND External Notification Active 
Time *490 + hh:mm + hh:mm 
Where: 
hh:mm = Start time; Hour and minutes in 24 hour format 
hh:mm = End Time; Hour and minutes in 24 hour format 
Example 1: *490 09 00 20 00 
                    AVM JR will activate the external notification                          between 9 am to 8 pm. 
 3.6 3.6   Programming the Voice Mail Programming the Voice Mail   
3.6.1 Creating Mailboxes 
You...

DTMF Programming  
3-12 Atlas AVM JR. Installation and Programming Manual Table 3-4 Commands to Create Mailboxes OPERATION COMMAND Creating a range of mailboxes 
*500 + First Mailbox + Last Mailbox + # Creating one mailbox 
*501 + Mailbox Number + # Selecting an announcer mailbox 
*502 + XXXX + Y + # 
Where: 
XXXX = existing mailbox number 
Y = 0; Regular mailbox (default) 
Y = 1; Announcer mailbox Deleting a mailbox 
*510 + Mailbox Number + # 
Make sure to remove any transfer to the deleted 
mailbox...

 DTMF Programming  
Atlas AVM JR. Installation and Programming Manual 3-13 Table 3-5 Commands to Create Mailbox Groups OPERATION COMMAND Adding a mailbox to a group 
*540 + Group Number + Mailbox Number + # 
Note: You must define the mailbox before adding 
it to a group. Changing the number of the first 
digit in the mailbox groups *545 + X 
where X is the first digit of the mailbox groups. 
Default is 0. Deleting a mailbox from a group 
*550 + Group Number + Mailbox Number + # Resetting a group *560 +...

DTMF Programming  
3-14 Atlas AVM JR. Installation and Programming Manual Remote Notification 
The mailbox owner may choose to be notified at a remote location (i.e., his mobile 
or home telephone number) by entering a remote telephone number of up to 20 
digits.  You can use any combination of *, #, A-D, 0-9, and Pause (*1) when 
setting the remote notification telephone number. 
After remote notification is enabled, the AVM JR. will dial the remote telephone 
number and notify the mailbox owner of any...

 DTMF Programming  
Atlas AVM JR. Installation and Programming Manual 3-15 Table 3-6 Commands to Program Notification for Mailboxes OPERATION COMMAND Setting local notification for a range 
of real mailboxes *700 +First Mailbox + Last Mailbox + X+#  
where 
X = 0 means notification is disabled 
X = 1 means Message Light On 1 is selected 
X = 2 means Message Light On 2 is selected 
X = 4 means Rings is selected Setting local notification for one real 
mailbox *701 + Mailbox + X + #  
where X is defined as...

DTMF Programming  
3-16 Atlas AVM JR. Installation and Programming Manual 3.7 3.7   Programming the Automated Attendant Script Menu Programming the Automated Attendant Script Menu   
The AVM JR. supports up to 21 script messages (00-20) for building the 
Automated Attendant menu.  The AVM JR. also supports another five script 
messages (21-25) for Busy, No Answer and Do Not Disturb menus (see Section 
3.7.5). 
The following numbers are dedicated to specific script messages: 
· 
Script message number 00...