HP PhotoSmart C7283 User Manual

Memory is fullCause: While receiving a fax, the HP All-in-One jammed with paper or ran out of
paper.
Solution: If the HP All-in-One supports faxing and you have  Backup Fax
Reception  enabled, the HP All-in-One might have stored the fax in memory upon
reception.
After clearing the paper jam or loading paper in the input tray, you might be able to
reprint the entire fax from  memory. If you do not have  Backup Fax Reception
enabled, or if the fax was not stored in memory for some reason (for example, if...

Solution:Do not overload the photo tray; make sure the stack of photo paper fits
within the photo tray and is no higher than the top of the paper-width guide.
Cause: Two or more pieces of paper might be stuck together.
Solution: Remove the paper from the photo tray and shuffle the paper so it does
not stick together. Reload the paper into the photo tray and try printing again.
Cause: The photo paper might be curled.
Solution: If the photo paper is curled, place the paper in a plastic bag and gently
bend...

•File format not supported
•
Invalid file name
•
Supported file types for the HP All-in-One
•
File corrupted
Error reading or writing the file Cause: The HP All-in-One software could not open or save the file.
Solution: Check to see if you typed the correct folder and file name.
Unreadable files. NN files could not be read
Cause: Some of the files on the inserted memory card or attached storage device
are damaged.
Solution: Reinsert the memory card in the HP Al l-in-One or try transferring the files
to...

Solution:Open the file in another application, and save it in a format that the HP All-
in-One softwa re recognizes.
For more information, see:
“
Supported file types for the HP All-in-One” on page 263
Invalid file name Cause: The file name you entered is invalid.
Solution: Make sure that you are not using any invalid symbols in the file name.
NOTE:Although the file name might look correct, it could still include invalid
characters. Overwrite the existing file name with a new name.
Supported file types...

•No scan options
•
Out of disk space
•
Memory card mu st be in slot
•
Card access error
•
Use only one card at a time
•
Card is inserted incorrectly
•
Card is not fully inserted
•
Card is damaged
•
Duplicate group speed dial name
•
Duplicate member
•
Invalid speed dial
Cannot crop Cause: The computer does not have enough memory.
Solution: Close all unnecessary applications. Th is includes applications that run in
the background, such as screensavers and virus checkers. (If you turn off your virus...

DisconnectedCause: Several situations can cause this error message to appear.
• Your computer is not turned on.
• Your computer is not connected to the HP All-in-One.
• The software that came with the HP All-in-One was not installed correctly.
• The software that came with the HP All-in-One is installed, but it is not running.
Solution: Make sure your computer is turned on and is connected to the HP All-in-
One. Also make sure you installed the software that came with the HP All-in-One.
For more...

Solution:Remove the memory card and reinsert it correctly. The front label of the
Compact Flash card faces left.
Cause: You have not fully inserted the memory card.
Solution: Remove the memory card and reinsert  it in the memory card slot until it
stops.
Use only one card at a time
Cause: Multiple memory cards are inserted in the HP All-in-One.
Solution: You can insert only one memory card at a time.
If more than one memory card is inserted, the Attention light will blink rapidly, and an
error message...

Solution:Reformat your memory card in your  camera or format your memory card
in a Windows XP computer by selecting the FAT format.
Cause: The file system is corrupted.
Solution: Check the display for an error message telling you that the images on the
memory card  are corrupted.
If the file system on the card  is corrupt, reformat the memory card in your digital
camera.
CAUTION: Reformatting the memory card will delete any photos stored on the
card. If you have previously transferred the photos from...

Cannot load paper from input trayCause: There is not enough paper in the input tray.
Solution: If the HP All-in-One is out of paper or there are only a few sheets
remaining, load more paper in the input tray. If there is paper in the input tray, remove
the paper, tap the stack of paper against a flat surface, and reload the paper into the
input tray. Follow the prompts on the display or the computer screen to continue your
print job.
For more information, see:
“
Load full-size paper” on page 76
Ink is...

For more information, see:
“
Clear paper jams” on page 171
Cause:The print head assembly is blocked.
Solution: Turn the HP All-in-One off and open the ink cartridge door. Remove any
objects that are blocking the print head assembly (including any packing materials),
and then turn the HP All-in-One on again.
Paper mismatch
Cause: The print setting for the print job does not match the paper type or size
loaded in the HP All-in-One.
Solution: Change the print setting or load the appropriate paper in the...