HP Photosmart C6383 User Manual

2.Load your original print side down on the right front corner of the glass.
3.Press  Start Copy Black  or Start Copy Color  to begin copying.
Preview your copy job
After changing settings on the HP All-in-One for making a copy, you can preview an image
of the expected output on the display before starting the copy.
NOTE:To ensure an accurate preview, change the paper size and type to reflect
the actual paper you have loaded in the input tray. If you use the Automatic settings,
the onscreen preview...

This section contains the following topics:
•
Set the number of copies
•
Set the copy paper size
•
Set the copy paper type
•
Change copy speed or quality
•
Adjust the lightness and darkness of your copy
Set the number of copies
You can set the number of copies from the control panel of the HP All-in-One or from the
HP Photosmart Software. This task explains how to set the number of copies from the
control panel only.
To set the number of copies from the control panel
1. Press  OK when  Copy is...

To set the paper type for copies
1. Press  OK when  Copy is highlighted on the Home Screen.
2. Press the Menu bu tton to select Copy Settings .
3.Press the down arrow button to highlight  Paper Type, and then press  OK.
4. Press the down arrow button until the appropriate paper type appears, and then press
OK.
Refer to the following table to determine which paper type setting to choose based
on the paper loaded in the input tray.
Paper typeControl panel setting
Copier paper or letterheadPlain Paper
HP...

Change copy speed or quality
The HP All-in-One provides three options that affect copy speed and quality:
•Best  produces high quality for all paper and eliminates the banding (striping) effect
that sometimes occurs  in solid areas. Best copies slower than the  Normal or Fast
quality settings.
• Normal  delivers high quality and is the recommended setting for most of your
copying.  Normal copies faster than  Best and is the default setting.
• Fast  copies faster than the  Normal setting. The text is...

To set default copy settings from the control panel
1. Make any needed changes to the Copy settings.
2. Press  OK when  Copy is highlighted on the Home Screen.
3. Press the Menu bu tton to select Copy Settings .
4.Press the down arrow button to highlight  Set as New Defaults, and then press OK.
5. Press  OK to confirm.
NOTE: The settings you specify here are only saved on the product. They do not
adjust the settings in the software. You can save your most frequently used software
settings by using the...

Press the down arrow button or the up arrow button to highlight one of the following, and
then press OK.
• Actual Size : This feature enables you to print an exact copy of the original.
• Fit to Page :This feature enables you to copy an original to fit within the printable
margins of a page without the risk of cropping some part of your original.
NOTE: In order to resize your original without changing the proportions or
cropping the edges, the HP All-in-One might leave an uneven amount of white
space...

Shift the left margin
If you are planning to bind your copies along the left edge (for example, in a 3-ring binder),
you can shift your copy slightly to the right, so that the words or images on the left side
of the page do not extend into the binding margin.
NOTE:The HP All-in-One shifts the words and images approximately 9.5 mm
(0.37 inch) to the right. To reduce the chances of cropping along the right edge as a
result, do not use the  Margin Shift and enlargement features together.
To shift the...

3.Press the down arrow button to highlight  Enhancements, and then press  OK.
4. Press the up arrow or down arrow button to highlight the type of document you are
copying ( Text, Photo , or Mixed ), and then press  OK.
NOTE: You can also try turning off  Enhancements if you are seeing quality
issues when copying.
Stop copying
To stop copying
▲ Press Cancel on the control panel.
Stop copying 115
Copy
 

Chapter 10
116 Use the copy features
Copy
 

11 Use the reprint features
The HP All-in-One enables you to make reprints of photographic originals placed on the
glass.
This section contains the following topics:
•
Make reprints of your photos
•
Edit a photo before reprinting
Make reprints of your photos
You can scan a printed copy of a photo to make reprints in a variety of sizes, up to the
size of letter or A4 paper.
By default, the HP All-in-One is set to detect the type of paper you are using automatically.
For the best results when reprinting...