HP Photosmart C6383 User Manual

To reverse an image for iron-on transfers
1.On the  File menu in your software application, click  Print.
2. Make sure the product is  the selected printer.
3. Click the button that opens the  Properties dialog box.
Depending on your software application, this button might be called  Properties,
Options , Printer Setup , Printer , or Preferences .
4. Click the  Features  tab.
5. In the  Paper Type  drop-down list, click  More, and then select  HP Iron-on Transfer
from the list.
6. If the selected size...

To print a group of addresses on labels or envelopes
1.Print a test page on plain paper first.
2. Place the test page on top of the label sheet or envelope, and hold both up to the
light. Check the spacing for each block of text. Make adjustments as needed.
3. Load the labels or envelopes into the main input tray.
CAUTION: Do not use envelopes with clasps or windows. They can get stuck in
the rollers and cause paper jams.
4. Slide the paper-width guide inward against the stack of labels or envelopes...

7.In the  Poster Printing  drop-down list, click either  2x2 (4 sheets), 3x3 (9 sheets) ,
4x4 (16 sheets) , or 5x5 (25 sheets) .
This selection tells the product to enlarge your document so that it fits on 4, 9, 16, or
25 pages.
If your originals are of multiple pages, each  of those pages will be printed on 4, 9, 16,
or 25 pages. For example, if you have a one-page original and you select 3x3, you
will get 9 pages; if you select 3x3 for a two-page original, 18 pages will print.
8. Click  OK, and then...

3.Double-click the product icon.
TIP: You can also double-click the printer icon in the Windows taskbar.
4.Select the print job you want to cancel.
5. On the  Document  menu, click  Cancel Printing  or Cancel , or press the  Delete key
on your keyboard.
It can take a few moments for the print job to be cancelled.
Stop a print job 91
Print
 

Chapter 7
92 Print from your computer
Print
 

8 Use the photo features
The HP All-in-One is equipped with memory card slots and a front USB port that enable
you to print or edit photos from a memory card or storage device (such as a keychain
drive, portable hard drive, or a digital camera in storage mode) without uploading your
photos to a computer first. Additionally, if the HP All-in-One is network-connected or
connected to a computer with a USB cable, you can also transfer your photos to the
computer to print, edit, or share.
You can print...

1Memory Stick, Memory Stick Pro, Memory Stick Select, Me mory Stick Magic Gate, Memory
Stick Duo or Duo Pro (adapter optional), or Memory Stick Micro (adapter required)
2MultiMediaCard (MMC), MMC Plus, Secure MultiMedia Card, MMC Mobile (RS-MMC; adapter
required), Secure Digital (SD), Secure Digital  Mini, Secure Digital High Capacity (SDHC),
TransFlash MicroSD Card (adapter required), or xD-Picture card
3CompactFlash (CF) types I and II
4Front USB port (for storage devices)
To insert a memory card
1....

TIP:To achieve the best print quality, HP recommends using HP papers that are
specifically designed for the type of project you are printing along with genuine HP
ink. HP papers and HP ink are specifically designed to work well together to provide
high-quality output.
To print photos
1. Load photo paper in the appropriate input tray.
• Load up to 13 x 18 cm (5 x 7 inch) photo paper in the photo tray.
• Load full-size photo paper in the main input tray.
2. Insert a memory card into the appropriate slot...

Create special projects from your photos
The HP All-in-One enables you to create spec ial projects from your photos, including:
• Photo albums
• Panorama prints
• Wallet-size photos
• Passport-size photos
To create special projects
1. Insert a memory card into the appropriate slot on the product or connect a storage
device to the front USB port.
NOTE: If there are camera-selected photos on the memory device, the  DPOF
Found  screen appears. Select  Yes to print the camera-selected photos, or select
No...

To save photos
1.Insert a memory card into the appropriate slot on the product or connect a storage
device to the front USB port.
2. Press the right arrow button until  Save is highlighted, and then press  OK.
NOTE: If the product is network-connected, a list of available computers
appears. Select the computer to which you want to transfer the photos, and then
continue to the next step.
3. Follow the onscreen prompts on your computer to save the photos to your computer.
Edit photos using  the control...