HP Photosmart C6383 User Manual

Rotate a photo
Depending on how you were holding your digital camera at the time you took a photo,
the photo might appear sideways or upside down on the display. You might need to rotate
the photo to make it show properly on the display.
NOTE:The HP All-in-One automatically adjusts the rotation so photos print properly
on the page. When printing more than one, the photos are oriented to fit a maximum
number of photos on the page.
To rotate a photo
1. Press the Menu button on the photo selection screen....

An outline appears on the photo to show you an approximate view of the area that
will print.
4. Press the arrows on the directional pad to pan around the photo and select a specific
area to print.
5. Press  OK to crop the photo.
Related topics
•“
Print photos” on page 94
•“
Make reprints of your photos” on page 117
Automatically enhance your photos
The HP All-in-One is set up, by default, to enhance your photos automatically when you
print them. When this feature is enabled, the HP All-in-One uses  HP...

To print a frame around your photo
1.Press the Menu button on the photo selection screen.
2.In the Edit Photos menu, press the up arrow or down arrow button until  Frame is
highlighted, and then press  OK.
3. Press the left arrow or right arrow  button to scroll through the frames.
4. When the frame you want is highlighted, press  OK.
The selected frame is applied to the photo and shown by itself on the display.
Related topics
“
Print photos” on page 94
Adjust the brightness of your photos
You can...

To change the color effects
1.Press the Menu button on the photo selection screen.
2.In the Edit Photos menu, press the up arrow or down arrow button to highlight  Color
Effect , and then press  OK.
3. Press the up arrow or down arrow button to select one of the following color effect
options, and then press  OK:
No EffectDoes not apply any special color effects to your photo.
Black & WhitePrints the photo in black and white.
SepiaApplies brown tones, similar to photos produced in the early 1900s, to...

Chapter 8
102 Use the photo features
Photos
 

9 Use the scan features
Scanning is the process of converting text and pictures into an electronic format for your
computer. You can scan almost anything (photos, magazine articles and text documents)
on the HP All-in-One.
You can use the scanning features of the HP All-in-One to do the following:
• Scan text from an article into your word processor and quote it in a report.
• Print business cards and brochures by scanning a logo and using it in your publishing
software.
• Send photos to friends and...

NOTE:When scanning, the HP Photosmart Software enables you to save an image
in the following file form ats: BMP, DCX, FPX, GIF, JPG, PCD, PCX, and TIF.
To scan to a computer
1.Load your original print side down on the right front corner of the glass.
2.Press  Start Scan  on the control panel.
3. Press the down arrow button to highlight  Scan to Computer, and then press OK.
NOTE: If the product is network-connected, a list of available computers
appears. Select the computer to which you want to transfer...

To save a scan to the memory card or storage device
1.Make sure your memory card is inserted into the appropriate slot on the product, or
a storage device is connected to the front USB port.
2. Load your original print side down on the right front corner of the glass.
3.Press  Start Scan .
4. Press the down arrow button to highlight  Scan to Memory Card or Scan to USB
Flash Drive , and then press  OK.
The product scans the image and saves the file to the memory card or storage device
in the JPEG...

Stop scanning
To stop scanning
▲Press Cancel on the control panel.
Chapter 9
106 Use the scan features
Scan
 

10 Use the copy features
The HP All-in-One enables you to produce high-quality color and black-and-white copies
on a variety of paper types, including transparencies. You can enlarge or reduce the size
of an original to fit a specific paper size, adjust the darkness of the copy, and use special
features to make high-quality copies of photos, including borderless copies.
TIP: For the best copy performance on standard copy projects, set the paper size
to  Letter  or A4, the paper type to  Plain Paper, and...