HP P2055 Manual
Have a look at the manual HP P2055 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1114 HP manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Menu itemDescription WEBEmbedded Web server accepts communications using HTTPS (Secure HTTP) only, or both HTTP and HTTPS. ● HTTPS : Accept only HTTPS (print server appears as a secure site). ● HTTP/HTTPS : Accept either HTTP or HTTPS. SECURITYReset current security settings to factory defaults. ●KEEP (default): Retain current security settings. ● RESET : Reset security settings to factory defaults. FIREWALLDisable Firewall. ●KEEP (default): Retain Firewall operation as configured. ● DISABLE : Disable Firewall operation. PRINTPrint a configuration page for the selected item. SECURITY : Print the current security settings. CFG LINK Manually configure the HP Jetdirect print servers network link. Set the link speed and communication mode. T hese must match the network. The available settings depend on the print server model. CAUTION: Changing the link setting can cause the loss of network communication with the print server. ● AUTO (default): Use auto negotiation to set the highest link speed and communication mode allowed. If auto negotiation fails, either 100TX HALF or 10TX HALF is set depending on the detected link speed of the hub/switch port. (A 1000T half-duplex selection is not supported.) ● 10T HALF : 10 Mbps, half-duplex operation. ● 10T FULL : 10 Mbps, Full-duplex operation. ● 100TX HALF : 100 Mbps, half-duplex operation. ● 100TX FULL : 100 Mbps, full-duplex operation. ● 100TX AUTO : Limits auto-negotiation to a maximum link speed of 100 Mbps. ● 1000TX FULL : 1000 Mbps, full-duplex operation. ENWW Control panel (HP LaserJet P2050 Series Printers only) 29
Control panel (HP LaserJet P2030 Series Printers only) The printer control panel is comprised of six lights and two buttons. The lights produce patterns that identify the printer status. 1 7 6 5 4 3 2 1Jam light: Indicates a jam in the printer 2Toner light : When the print cartridge is low, the Toner light illuminat es. When the print cartridge is out of the printer, the Toner light blinks. 3Paper out light : Indicates the printer is out of paper 4Attention light: Indicates the print cartridge door is open or other errors exist 5Ready light: Indicates the printer is ready to print 6Go button and light 7Cancel button : To cancel the print job currently printing, press the Cancel button. NOTE: See Status-light patterns (HP LaserJ et P2030 Series Printers only) on page 209 for a description of the light patterns. 30 Chapter 2 Control panel ENWW
3 Paper and print media ●Supported paper and print media ● Load paper and print media ● Configure trays ● Use paper output options ENWW 31
Supported paper and print media Paper for the HP LaserJet P2050 Series Printers Supported paper and print media sizes This product supports a number of paper sizes, and it adapts to various media. NOTE:To obtain best results, select the correct paper size and type in the printer driver before printing. Table 3-1 Supported paper and print media sizes Size and dimensionsTray 1Tray 2Optional 500-sheet Tray 3Duplexer Letter 216 x 279 mm (8.5 x 11 inches) Legal 216 x 356 mm (8.5 x 14 inches) A4 210 x 297 mm (8.27 x 11.69 inches) A5 148 x 210 mm (5.83 x 8.27 inches) A6 105 x 148 mm (4.1 x 5.8 inches) B5 (JIS) 182 x 257 mm (7.17 x 10.12 inches) Executive 184 x 267 mm (7.24 x 10.51 inches) Postcard (JIS) 100 x 148 mm (3.9 x 5.8 inches) Double Postcard (JIS) 148 x 200 mm (5.8 x 7.9 inches) 16K 184 x 260 mm (7.2 x 10.2 inches) 16K 195 x 270 mm (7.7 x 10.6 inches) 16K 197 x 273 mm (7.8 x 10.8 inches) 8.5 x 13 216 x 330 mm (8.5 x 13 inches) 32 Chapter 3 Paper and print media ENWW
Size and dimensionsTray 1Tray 2Optional 500-sheet Tray 3Duplexer Envelope Commercial #10 105 x 241 mm (4.13 x 9.49 inches) Envelope B5 ISO 176 x 250 mm (6.7 x 9.8 inches) Envelope C5 ISO 162 x 229 mm (6.93 x 9.84 inches) Envelope DL ISO 110 x 220 mm (4.33 x 8.66 inches) Envelope Monarch 98 x 191 mm (3.9 x 7.5 inches) Custom 76 x 127 mm to 216 x 356 mm (3.0 x 5.0 inches to 8.5 x 14 inches) Supported paper and print media types For a complete list of specif ic HP-brand paper that this product supports, go to www.hp.com/go/ ljp2050series_software. Paper type (control panel)Paper type (printer driver)Tray 1Tray 2Optional 500- sheet Tray 3Duplexer PLAIN 75–95 GPlain LIGHT 60-74 GLight 60-74g MID-WEIGHTMid-weight HEAVY 111–130 GHeavy 111–130g EXTRA HEAVY 131–175 GExtra heavy 131–175g TRANSPARENCYMonochrome Laser Transparency LABELSLabels LETTERHEADLetterhead PREPRINTEDPreprinted PREPUNCHEDPrepunched COLORColored ROUGHRough BOND Bond Table 3-1 Supported paper and print media sizes (continued) ENWW Supported paper and print media 33
Paper type (control panel)Paper type (printer driver)Tray 1Tray 2Optional 500- sheet Tray 3Duplexer RECYCLEDRecycled ENVELOPEEnvelope Tray and bin capacity Tray or binPaper typeSpecificationsQuantity Tray 1PaperRange: 60 g/m 2 (16 lb) bond to 200 g/m2 (54 lb) bond Maximum stack height: 5 mm (0.3 inch) Equivalent to 50 sheets of 75 g/ m 2 (20 lb) bond EnvelopesLess than 60 g/m2 (16 lb) bond to 90 g/m2 (24 lb) bond Up to 5 envelopes LabelsMaximum 0.23 mm (0.009 inch) thickMaximum stack height: 5 mm (0.3 inch) TransparenciesMinimum 0.13 mm (0.005 inch) thickMaximum stack height: 5 mm (0.3 inch) Tray 2PaperRange: 60 g/m 2 (16 lb) bond to 135 g/m2 (36 lb) bond Equivalent to 250 sheets of 75 g/ m2 (20 lb) bond Maximum stack height for A6 paper: 15 mm (0.59 inch) TransparenciesMinimum 0.13 mm (0.005 inch) thickMaximum stack height: 26 mm (1.0 inch) Optional 500-sheet Tray 3PaperRange: 60 g/m 2 (16 lb) bond to 135 g/m2 (36 lb) bond Equivalent to 500 sheets of 75 g/ m2 (20 lb) bond Maximum stack height for A6 paper: 40 mm (1.6 inches) TransparenciesMinimum 0.13 mm (0.005 inch) thickMaximum stack height: 54 mm (2.1 inches) Standard top bin Paper Up to 125 sheets of 75 g/m2 (20 lb) bond Paper for the HP Laser Jet P2030 Series Printers Supported paper and print media sizes This product supports several paper si zes, and it adapts to various media. NOTE:To obtain the best print result s, select the appropriate paper size and type in the print driver before printing. 34 Chapter 3 Paper and print media ENWW
Table 3-2 Supported paper and print media sizes Size and dimensionsTray 1Tray 2 Letter 216 x 279 mm (8.5 x 11 inches) Legal 216 x 356 mm (8.5 x 14 inches) A4 210 x 297 mm (8.27 x 11.69 inches) A5 148 x 210 mm (5.83 x 8.27 inches) A6 105 x 148 mm (4.1 x 5.8 inches) B5 (JIS) 182 x 257 mm (7.17 x 10.12 inches) Executive 184 x 267 mm (7.24 x 10.51 inches) Postcard (JIS) 100 x 148 mm (3.9 x 5.8 inches) Double Postcard (JIS) 148 x 200 mm (5.8 x 7.9 inches) 16K 184 x 260 mm (7.2 x 10.2 inches) 16K 195 x 270 mm (7.7 x 10.6 inches) 16K 197 x 273 mm (7.8 x 10.8 inches) 8.5 x 13 216 x 330 mm (8.5 x 13 inches) Envelope Commercial #10 105 x 241 mm (4.13 x 9.49 inches) Envelope B5 ISO 176 x 250 mm (6.7 x 9.8 inches) Envelope C5 ISO 162 x 229 mm (6.93 x 9.84 inches) Envelope DL ISO ENWW Supported paper and print media 35
Size and dimensionsTray 1Tray 2 110 x 220 mm (4.33 x 8.66 inches) Envelope Monarch 98 x 191 mm (3.9 x 7.5 inches) Custom 76 x 127 mm to 216 x 356 mm (3.0 x 5.0 inches to 8.5 x 14 inches) Supported paper and print media types For a complete list of specific HP-brand paper that this product supports, go to www.hp.com/support/ ljp2030series. Paper type (printer driver)Tray 1Tray 2 Plain Paper Light 60–74 g/m2 Midweight (96–110 g/m2) Heavy (111–130 g/m2) Extra Heavy (131–175 g/m2) Transparency Labels Letterhead Preprinted Prepunched Color Rough Bond Recycled Envelope HP Multipurpose Paper HP Office Paper HP LaserJet Paper HP Premium Choice Paper Table 3-2 Supported paper and print media sizes (continued) 36 Chapter 3 Paper and print media ENWW
Tray and bin capacity Tray or binPaper typeSpecificationsQuantity Tray 1PaperRange: 60 g/m 2 (16 lb) bond to 200 g/m2 (54 lb) bond Maximum stack height: 5 mm (0.3 inch) Equivalent to 50 sheets of 75 g/ m 2 (20 lb) bond EnvelopesLess than 60 g/m2 (16 lb) bond to 90 g/m2 (24 lb) bond Up to 5 envelopes LabelsMaximum 0.23 mm (0.009 inch) thickMaximum stack height: 5 mm (0.3 inch) TransparenciesMinimum 0.13 mm (0.005 inch) thickMaximum stack height: 5 mm (0.3 inch) Tray 2PaperRange: 60 g/m 2 (16 lb) bond to 135 g/m2 (36 lb) bond Equivalent to 250 sheets of 75 g/ m2 (20 lb) bond Maximum stack height for A6 paper: 15 mm (0.59 inch) TransparenciesMinimum 0.13 mm (0.005 inch) thickMaximum stack height: 26 mm (1.0 inch) Standard top bin Paper Up to 125 sheets of 75 g/m2 (20 lb) bond ENWW Supported paper and print media 37
Load paper and print media Load trays Paper orientation for loading trays If you are using paper that requires a specific orientation, load it according to the information in the following table. TraySingle-sided printingDuplex printing (HP LaserJet P2050 Series Printers only)Envelope printing Tray 1Face-up Top edge leading into the productFace-up Top edge leading into the productFront of envelope face-up Short edge with postage leading into the product Tray 2Face-down Top edge at the front of the trayFace-down Top edge at the front of the trayUse only Tray 1 for printing envelopes. Optional Tray 3 (HP LaserJet P2050 Series Printers only) Face-down Top edge at the front of the trayFace-down Top edge at the front of the trayUse only Tray 1 for printing envelopes. 38 Chapter 3 Paper and print media ENWW