HP P2055 Manual
Have a look at the manual HP P2055 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1114 HP manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
3.Grasp the bottom front of the cover, and then gently separate the cover from the product. Figure 6-31 Remove the left cover (3 of 4) 4.Carefully slide the cover toward the fron t of the product, and then remove it. Figure 6-32 Remove the left cover (4 of 4) ENWW External panels, covers, and doors 119
Rear cover, rear door, and duplex-paper-feed assembly NOTE:Only the HP LaserJet P2050 Series products have a duplex-paper-feed assembly installed. CAUTION:The fuser can be hot while the product is in use. Wait for the fuser to cool before handling it. 1. Remove the following components: ● Right cover. See Right cover on page 115 . ● Left cover. See Left cover on page 118 . 2. HP LaserJet P2050 Series only: Pull down on the green duplex-paper-feed-assembly release tab, and then lower the assembly. NOTE: To locate the assembly release tab, look up into the Tray 2 cavity (where the cassette would be installed). Figure 6-33 Remove the rear cover, rear door, and duplex-paper-feed assembly (1 of 6; HP LaserJet P2050 Series only) 120 Chapter 6 Removal and replacement ENWW
3.Remove five screws (callout 1). Figure 6-34 Remove the rear cover, rear door, and duplex-paper-feed assembly (2 of 6) 1 4.Release one tab (callout 2). Figure 6-35 Remove the rear cover, rear door, and duplex-paper-feed assembly (3 of 6) 2 ENWW External panels, covers, and doors 121
5.Carefully separate the rear cove r and rear door from the product, and then remove them. NOTE:For the HP LaserJet P2050 Series, the duplex-paper-feed assembly is removed with the cover and door Reinstallation tip When you reinstall the rear cover assembly, open the rear door to make sure that the rear cover fits even against the pro duct chassis before you install the mounting screws. Figure 6-36 Remove the rear cover, rear door, and duplex-paper-feed assembly (4 of 6; HP LaserJet P2030 Series) Figure 6-37 Remove the rear cover, rear door, and duplex-paper-feed assembly (5 of 6; HP LaserJet P2050 Series) 122 Chapter 6 Removal and replacement ENWW
6.HP LaserJet P2050 Series only: Carefully release two hinge pins (callout 3), and then separate the rear cover and rear door (callout 4) fr om the duplex-paper-feed assembly (callout 5). Figure 6-38 Remove the rear cover, rear door, and duplex-paper-feed assembly (6 of 6; HP LaserJet P2050 Series only) 3 5 4 ENWW External panels, covers, and doors 123
Top-cover assembly NOTE:The top-cover assembly includes the control panel assembly. 1.Remove the following components: ● Right cover. See Right cover on page 115 . ● Left cover. See Left cover on page 118 . ● Rear cover, rear door, and duplex-paper-feed assembly. See Rear cover, rear door, and duplex-paper-feed assembly on page 120 . NOTE: Only the HP LaserJet P2050 Series prod ucts have a duplex-paper-feed assembly installed. 124 Chapter 6 Removal and replacement ENWW
2.Remove one screw (callout 1), and then disconnect one connector (callout 2). Figure 6-39 Remove the top-cover assembly (1 of 4; HP LaserJet P2030 Series only) 1 2 Figure 6-40 Remove the top-cover assembly (2 of 4; HP LaserJet P2050 Series only) 1 2 ENWW External panels, covers, and doors 125
3.Remove three screws (callout 3). Figure 6-41 Remove the top-cover assembly (3 of 4) 3 4.Lift the top-cover assembly off of the product to remove it. Figure 6-42 Remove the top-cover assembly (4 of 4) 126 Chapter 6 Removal and replacement ENWW
Cartridge-door assembly and front cover NOTE:The cartridge door assembly includes the cartridge door, Tray 1, and the front cover. 1.Remove the following components: ● Right cover. See Right cover on page 115. ● Left cover. See Left cover on page 118. 2. Release two tabs, and then disengage the cartri dge-door assembly link arm (callout 1). TIP:The link arm releases the fuser-pressure lever when the cartridge door is opened. Figure 6-43 Remove the cartridge door assembly and front cover (1 of 4) 1 3.Remove two screws (callout 2). Figure 6-44 Remove the cartridge door assembly and front cover (2 of 4) 2 ENWW External panels, covers, and doors 127
4.Carefully remove the cartridge-door assembly. Figure 6-45 Remove the cartridge door assembly and front cover (3 of 4) 5.Disengage two hinge pins (callout 3), and then ca refully separate the front cover (callout 4) from the cartridge door assembly (callout 5). Figure 6-46 Remove the cartridge door assembly and front cover (4 of 4) 3 4 5 128 Chapter 6 Removal and replacement ENWW