HP Officejet 7413 User Manual

Copy a two-page black-and-white document 
You can use the HP all-in-one to copy a single- or multiple-page document in color or
black and white. In this example, the HP all-in-one is used to copy a two-page black-
and-white original.
To copy a two-page document from the control panel
1 Make sure you have paper loaded in the input tray.
2 Load your letter- or A4-sized originals in the document feeder tray. Place the pagesso that the top of the document goes in first.
3 Press  Copy, if not already lit.
4...

NoteDo not take the paper out of the tray until both sides of the copy are
complete.
Collate copies     
You can use the  Collate feature to produce sets of copies in the exact order that they
are scanned from the document feeder tray. You  must copy more than one original to
use the collate feature.
Note The collate feature is available only on certain models.
To collate copies from the control panel
1 Make sure you have paper loaded in the input tray.
2 Load your originals face up in the document...

color and photo print cartridges installed, you have a six-ink system. See Use a photo
print cartridge  for more information.
WarningIn order to make a borderless copy, you must have photo paper (or
other specialty paper) loaded. If the HP all-in-one detects plain paper in the
input tray, it will not make a borderless copy. Instead, your copy will have
borders.
1 Load 10 by 15 cm (4 by 6 inch) photo paper in the input tray. Note If your HP all-in-one has more than one  input tray, you might need to...

WarningIn order to make a borderless copy, you must have photo paper (or
other specialty paper) loaded. If the HP all-in-one detects plain paper in the
input tray, it will not make a borderless copy. Instead, your copy will have
borders.
Note This feature will not work correctly if the glass and lid backing are not clean. For
more information, see  Clean the HP all-in-one .
1 Load letter or A4 photo paper in the input tray. If your HP all-in-one has more than one  input tray, you might need to select...

To copy a photo several times on one page
1 Make sure you have paper loaded in the input tray.
2 Load your original photo face down on the right front corner of the glass.Position the photo on the glass so the long edge of the photo is along the front
edge of the glass.
3 In the Copy area, press  Reduce/Enlarge, and then press 5.
This displays the  Reduce/Enlarge menu and then selects  Image Sizes.
4 Press 
 to highlight the size in which you  want to copy the photo, and then press
OK .
Depending on the...

Resize an original using custom settings       
You can use your own custom settings to reduce or enlarge a copy of a document.
1 Make sure you have paper loaded in the input tray.
2 Load your original face down on the right front corner of the glass or face up in the document feeder tray.
Place the page in the document feeder tray so that the top of the document goes in
first.
3 In the Copy area, press  Reduce/Enlarge, and then press 5.
This displays the  Reduce/Enlarge menu and then selects  Custom...

If you use the document feeder tray, place the pages so that the top of the
document goes in first.
3 In the Copy area, press  Menu.
This displays the  Copy Menu.
4 Press 
 to highlight  Lighter/Darker , and then press  OK.
This displays the  Lighter/Darker screen. The range of  Lighter/Darker values
appears as a scale on the color graphics display.
5 Press 
 to darken the copy, and then press  OK.
Note You can also press 
 to lighten the copy.
6 Press 
 to highlight  Color Intensity , and then press...

Enhance light areas of your copy     
You can use Photo enhancements to enhance light colors that might otherwise appear
white. You can also use  Photo enhancements to eliminate or reduce any of the
following that might occur when copying with  Text enhancements:
● Stray dots of color surround some text on your copies
● Large, black typefaces look splotchy (not smooth)
● Thin, colored objects or lines contain black sections
● Horizontal grainy or white bands appear in light- to medium-gray areas
To copy...

1 Make sure you have paper loaded in the input tray.
2 Load your original face down on the right front corner of the glass.If you are copying a photo, position the photo on the glass so the long edge of the
photo is along the front edge of the glass.
3 Press  Reduce/Enlarge  and then press 0.
This displays the  Reduce/Enlarge menu and then selects  Poster.
4 Press 
 to highlight a page width for the poster, and then press  OK.
The default poster size is two pages wide.
5 Press  Start Copy Black  or...

Stop copying     
➔To stop copying, press  Cancel on the control panel.
User Guide 67
Use the copy features