HP Officejet 7413 User Manual

APrint photos from your PictBridge-compatible digital camera
BPrint photos from your camera using a software application on your computer.
CPrint photos from a memory card using the control panel on the HP all-in-one.
DPrint photos from a memory card by transferring photos to your Windows PC
and printing them using the HP Image Zone software.
Print photos using a Macintosh
The graphic below shows several methods for printing photos using a Macintosh. For
more information, see the list below the...

APrint photos from your PictBridge-compatible digital camera.
BPrint photos from your camera using a software application on your computer.
CPrint photos from a memory card using the control panel on the HP all-in-one.
DPrint photos from a memory card by transferring photos to your Macintosh and
printing them using the HP Gallery software or the  HP Director software.
User Guide 29
Work with photos
 

5Load originals and load paper
This chapter provides instructions for loading originals in the automatic document
feeder or on the glass to copy, scan, or fax; choosing the best paper type for your job;
loading paper in the input tray; and avoiding paper jams.
Load originals 
You can load an original for a copy, fax, or scan job in the automatic document feeder
or on the glass. Originals that are loaded in the automatic document feeder will
automatically be fed into the HP all-in-one.
Load an original...

Load an original on the glass   
You can copy, scan, or fax up to letter-, A4-, or legal-size single-page originals by
loading them on the glass, as described here. If your original contains multiple full-size
pages, load it in the automatic document feeder. For more information, see Load an
original in the automatic document feeder .
You should also follow these instructions when  loading a proof sheet on the glass for
photo printing. If your proof sheet contains multiple pages, load each page on the...

load glossy or matte photo paper in the input tray. If you are printing a brochure or
presentation, use a type of paper specifically designed for that purpose.
For more information about HP papers, see the onscreen HP Image Zone Help, or go
to  www.hp.com/support .
Papers to avoid 
Using paper that is too thin, paper that has a slick texture, or paper that stretches easily
can cause paper jams. Using paper that has a heavy texture or does not accept ink can
cause printed images to smear, bleed, or not...

To load full-size paper in the main input tray
1 Remove the output tray, and slide the paper-width and paper-length guides to theiroutermost positions.
2 Tap a stack of paper on a flat surface  to align the edges, and then check the paper
for the following:
– Make sure it is free of rips, dust, wrinkles, and curled or bent edges.
– Make sure all the paper in the stack is the same size and type.
3 Insert the stack of paper into the input tray with the short edge forward and the print side down. Slide the...

6 Fully extend the output tray extender to catch completed copy, print, or fax jobs.
To load full-size plain paper in the optional lower tray
➔The HP 250 Sheet Plain Paper Tray is available as an accessory for this product.
For information on loading paper in this accessory, read and follow the instructions
that came with the accessory.
Load 10by 15cm (4by 6inch) photo paper        
You can load 10 by 15 cm (4 by 6  inch) photo paper into the main input tray of your
HP all-in-one, or into an optional...

Do not overload the input tray; make sure the stack of photo paper fits within the
input tray and is no higher than the top of the paper-width guide.
5 Replace the output tray.
To load 10 by 15 cm (4 by 6 inch) photo paper in the optional rear tray
➔The HP Auto Two-sided Print Accessory with Small Paper Tray and the
Hagaki Tray with Auto Two-sided Print Accessory are available for this product.
For information on loading paper in either of these accessories, read and follow the
instructions that came...

To load postcards or Hagaki cards in the optional rear tray
➔The HP Auto Two-sided Print Accessory with Small Paper Tray and the
Hagaki Tray with Auto Two-sided Print Accessory are available for this product.
For information on loading paper in either of these accessories, read and follow the
instructions that came with the accessory.
Load envelopes   
You can load one or more envelopes into the input tray of your HP all-in-one. Do not
use shiny or embossed envelopes or envelopes that have clasps or...

PaperTips
HP papers●HP Premium Paper: Locate the gray arrow on the nonprinting side
of the paper, and then slide the paper into the input tray with the
arrow side facing up.
● HP Premium Inkjet Transparency Film: Insert the film so that the
white transparency strip (with arrows and the HP logo) is on top and
is going into the input tray first.
Note The HP all-in-one might not automatically detect
transparency film if it is loaded incorrectly, or if you use
transparency film other than HP transparency...