HP LaserJet M1005 User Manual

6 Copy
●Starting a copy job
●
Canceling a copy job
●
Adjusting the copy quality
●
Adjusting the lighter/darker (contrast) setting
●
Reducing or enlarging copies
●
Changing the number of copies
●
Copying onto media of different types and sizes
●
Copying two-sided documents
●
Copying photos and books
●
Viewing copy settings
ENWW41
 

Starting a copy job
To make copies with the device, use the following instructions. 
1. Lift the scanner lid, and then load your document face-down (one page at a time) with the upper- 
left corner of the document  located in the lower-right corner of the scanner glass.
2.Press Start Copy on the device control panel to start copying. 
3. Repeat the process for each copy. 
For more detailed instructions about loading documents to copy, see Loading documents to copy or
scan on page 24 .
Canceling a copy...

To adjust the copy quality for the current job
1.On the device control panel, press More Copy Settings twice to see the current quality setting for
the copy.
2.Use the < or the > button to scroll through the quality setting options.
3.Select a setting, and then press Start Copy to save the selection and immediately start the copy
job, or press Menu/Enter to save the selection without starting the job.
NOTE:The change in the setting remains active for about two minutes after the copy job has
been...

Adjusting the lighter/darker (contrast) setting
The lighter/darker setting affects the lightness or darkness (contrast) of the copy. Use the following
procedure to change the contrast for the current copy job only.
To adjust the lighter/darker setting for the current job
1.On the device control panel, press Lighter/Darker to see the current contrast setting.
2.Use the < or the > button to adjust the setting. Move the slider to the left to make the copy lighter
than the original, or move the slider to the...

Reducing or enlarging copies
The device can reduce copies to as little as 25% of the original size or enlarge copies to as much as
400% of the original size.
Reduction/enlargement settings
●Original=100%
●A4 > Ltr=94%
●Ltr > A4=97%
●Full page=91%
●2 pages/sheet
●4 pages/sheet
●Custom: 25-400%
NOTE:For information about using the 2 pages/sheet or 4 pages/sheet setting, see Copying multiple
pages on one sheet of paper on page 46.
Adjusting the copy size
To reduce or enlarge copies for the current job
1.On...

NOTE:If you select Custom: 25-400%, type in the percentage of the original size that you
normally want for copies.
If you select 2 pages/sheet or 4 pages/sheet, select the orientation (portrait or landscape).
5.Press Menu/Enter to save the selection.
Copying multiple pages on one sheet of paper
1.On the device control panel, press More Copy Settings.
2.Use the < or the > button to select Reduce/Enlarge, and then press Menu/Enter.
3.Use the < or the > button to select 2 pages/sheet or 4 pages/sheet, and...

Changing the number of copies
You can choose to have the default number of copies be any number from 1 to 99.
To change the number of copies for the current job
1.On the device control panel, press # Copies.
2.Use the < or the > button to adjust the number of copies, and then press Menu/Enter.
3.Press Start Copy.
NOTE:The change in the setting remains active for about two minutes after the copy job has
been completed. During this time, Settings=Custom appears on the device control-panel display.
To...

Copying onto media of different types and sizes
The device is set to copy on either letter- or A4-size paper, depending on the country/region in which it
was purchased. You can change the size and type of media that you copy to for the current copy job or
for all copy jobs.
Media-size settings
●Letter
●Legal
●A4
Media-type settings
●Plain
●Preprinted
●Letterhead
●Transparency
●Prepunched
●Labels
●Bond
●Recycled
●Color
●Light
●Heavy
●Cardstock
●Envelope
●Rough Paper
To change the default media-size...

To change the default media-type setting type
1.On the device control panel, press Menu.
2.Use the < or the > button to select System setup, and then press Menu/Enter.
3.Use the < or the > button to select Paper setup, and then press Menu/Enter.
4.Use the < or the > button to select Def. paper type, and then press Menu/Enter.
5.Use the < or the > button to select a media type, and then press Menu/Enter.
6.Press Menu/Enter to save the selection.
ENWW Copying onto media of different types and sizes 49
 

Copying two-sided documents
Copying a two-sided original to a one-sided document 
Copies resulting from these proc edures are printed on one side, and need to be hand-collated. 
1. Load the first page of the document to be copied face-down onto the flatbed scanner, and then 
close the scanner lid.
2. Press Start Copy. 
3. Flip the page on the scanner to the second side, and then close the scanner lid. 
4. Press Start Copy. 
5. Repeat steps 1 through 4 for each page until all of the original document...