HP LaserJet M1005 User Manual

Creating and using watermarks
A watermark is a notice, such as Confidential, that is printed in the background of each page of a
document.
To use an existing watermark
1.Open the printer driver (see 
Changing printer-driver settings on page 9).
2.From the Effects tab, click the Watermarks drop-down list.
3.Click the watermark that you want to use.
4.If you want the watermark to appear only on the first page of the document, click First Page
Only.
5.Click OK. The product is now set to print the watermark...

Setting a custom paper size from the printer driver
To set a custom paper size
1.Open the printer driver (see 
Changing printer-driver settings on page 9).
2.On the Paper/Quality tab, click Custom.
3.On the Custom Paper Size window, type the name of the custom paper size.
4.Type the paper-size length and width. If you type a size that is too small or too large, the driver
automatically adjusts the size to the minimum or maximum size that is allowed.
5.If necessary, click the button to change the unit of...

1.Open the printer driver (see Changing printer-driver settings on page 9). 
2. Click the Finishing tab. 
3. In the section for Document Options, select the number of pages that you want to print on each 
sheet (1, 2, 4, 6, 9, or 16). 
4. If the number of pages is greater than 1, select the correct options for Print Page Borders and 
Page Order . 
● Click  Print Page Borders if you want to print a border around each page on the sheet. 
● Click  Page Order to select the order and placement of the pages on...

5.Without changing the orientation, remove the printed stack from the output bin, and then straighten 
the stack.
6. Maintaining the same orientation, place the stack of media in the input tray again. The printed side 
should be facing down with the top edge feeding into the device first.
7. On the device control panel, click OK and wait for the second side to print. 
34 Chapter 5   Printing ENWW
 

Using features in the Macintosh printer driver
When you print from a software program, many of the features are available from the printer driver. For
complete information about the features that are available in the printer driver, see the printer-driver
Help. The following features are described in this section:
●
Creating and using presets
●
Printing a cover page (Macintosh)
●
Printing multiple pages on one sheet of paper (Macintosh)
●
Printing on both sides (Macintosh)
NOTE:Settings in the printer...

Printing a cover page (Macintosh)
If you want to, you can print a separate cover page for your document that includes a message (such
as “Confidential”).
1.Open the printer driver (see 
Changing printer-driver settings on page 9).
2.On the Cover Page pop-up menu, select whether to print the cover page Before Document or
After Document.
3.If you are using Mac OS X V10.3 or Mac OS X V10.4, in the Cover Page Type pop-up menu, select
the message that you want to print on the cover page.
NOTE:To print a blank...

Printing on both sides (Macintosh)
1.On the Print dialog, select Manual Duplex. 
2. In the Manual Duplex area, select Print on Both Sides (Manually). 
3. Print the document. 
4. After one side has been printed, remove the remaining media from the input tray, and set it aside 
until after you finish your manual duplexing job.
5. Without changing the orientation, remove the printed stack from the output bin, and then straighten 
the stack.
ENWW Using features in the Macintosh printer driver 37
 

6.Maintaining the same orientation, place the stack of media in the input tray again. The printed side 
should be facing down with the top edge feeding into the device first.
7. On the device control-panel, click OK and wait for the second side to print. 
38 Chapter 5   Printing ENWW
 

Printing on special media
Make sure that the paper or print media that you are using meets HP specifications. See Media
specifications on page 13. Generally, smoother paper provides better results. 
1. Open the media input tray and remove any media.
2.Load the media. Make sure that the top of the media is forward and the side to be printed on is 
facing up. 
3. Adjust the media guides to the length and width of the media.
4.For Windows printer drivers, on the Paper tab or the Paper/Quality tab, select...

Canceling a print job
If a print job is currently printing, you can cancel it by pressing Cancel on the device control panel.
CAUTION:Pressing Cancel clears the job that the device is currently processing. If more than one
process is running, pressing Cancel clears the process that currently appears on the control panel.
You can also cancel a print job from a software program or a print queue.
To stop the print job immediately, remove the remaining print media from the device. After printing stops,
use...