HP LaserJet M1005 User Manual

Supported media weights and sizes
For optimum results, use conventional 80 to 90 g/m2 (20 to 24 lb) photocopy paper. Verify that the paper
is of good quality and is free of cuts, nicks, tears, spots, loose particles, dust, wrinkles, curls, and bent
edges.
NOTE:The device supports a wide range of standard and custom sizes of print media. The capacity
of trays and bins can vary depending on media weight and thickness and on environmental conditions.
Use only transparencies that are designed for use with HP...

Printing and storage environment
Ideally, the printing and media-storage environment should be at or near room temperature, and not too
dry or too humid. Remember that paper absorbs and loses moisture rapidly.
Heat works with humidity to damage paper. Heat causes the moisture in paper to evaporate, while cold
causes it to condense on the sheets. Heating systems and air conditioners remove most of the humidity
from a room. As paper is opened and used, it loses moisture, causing streaks and smudging....

4 Using the device
●Loading media
●
Controlling print jobs
●
Using the device control panel
ENWW23
 

Loading media
The following sections describe how to load media into the different input trays.
CAUTION:Printing on wrinkled, folded, or damaged media can cause jams. See Guidelines for using
media on page 16 for more information.
Loading documents to copy or scan
Use these instructions to load originals into the device for scanning. 
1. Lift the flatbed scanner cover. 
2. Place the original document face-down on the flatbed scanner with the upper-left corner of the 
document at the lower-right corner of...

Main input tray (tray 1)
The main input tray holds up to 150 pages of 80 g/m2 or 20 lb paper or fewer pages of heavier media 
(15 mm (0.6 in) or less stack height). Load media with the top forward and the side to be printed facing
down. To prevent jams and skewing, always adjust the side and rear media guides.
NOTE: When you add new media, make sure that you remove all of the media from the input tray and 
straighten the stack of new media. This helps to pr event multiple sheets of media from feeding...

Controlling print jobs
This section provides basic printing instructions. When making changes to printing settings, follow the
hierarchy of how changes are prioritized.
NOTE:The names of commands and dialog boxes might vary depending on your software program.
Print-settings priorities
When making changes to printing settings, follow the hierarchy of how changes are prioritized. (Note
that the names of commands and dialog boxes might vary depending on your software program.)
●Page Setup dialog box: This...

Using the device control panel
You can configure settings at the control panel.
Changing the control-panel display language
Use this procedure to print reports or to show messages on the device control-panel display in a
language other than the default for your country/region.
1.Press Menu/Enter.
2.Use the < or the > button to select System setup, and then press Menu/Enter.
3.Use the < or the > button to select Language, and then press Menu/Enter.
4.Use the < or the > button to select the language that...

To change the default media type
1.Press Menu/Enter.
2.Use the < or the > button to select System setup, and then press Menu/Enter.
3.Use the < or the > button to select Paper setup, and then press Menu/Enter.
4.Use the < or the > button to select Def. paper type, and then press Menu/Enter.
5.Use the < or the > button to select the type.
6.Press Menu/Enter to save the selection.
28 Chapter 4   Using the device ENWW
 

5Printing
This section provides information about common printing tasks.
●
Using features in the Windows printer driver
●
Using features in the Macintosh printer driver
●
Printing on special media
●
Using archive print
●
Canceling a print job
ENWW29
 

Using features in the Windows printer driver
When you print from a software program, many of the product features are available from the printer
driver. For complete information about the features that are available in the printer driver, see the printer-
driver Help. The following features are described in this section:
●
Creating and using quick sets
●
Creating and using watermarks
●
Resizing documents
●
Setting a custom paper size from the printer driver
●
Using different paper and printing covers
●...