HP LaserJet 3052 User Manual

							device is connected. This is to avoid damage to the equipment caused by local lightning strikes and
other electrical surges.
Environmental Product Stewardship program
Protecting the environment
Hewlett-Packard Company is committed to providing quality products in an environmentally sound
manner. This product has been designed with several attributes to minimize impacts on our
environment.
Ozone production
This product generates no appreciable ozone gas (O3).
Power consumption
Power usage drops significantly while in PowerSave mode (HP LaserJet 3052/3055/3390/3392 all-in-
one), which saves natural resources and saves money without affecting the high performance of this
product. This product qualifies for ENERGY STAR®, which is a voluntary program established
to encourage the development of energy-efficient office products.
ENERGY STAR is a U.S. registered service mark of the U.S. Environmental Protection Agency. As
an ENERGY STAR® partner, Hewlett-Packard Company has determined that this product meets
ENERGY STAR® Guidelines for energy efficiency. For more information, see
http://www.energystar.gov .
Toner consumption
Economode uses significantly less toner, which might  extend the life of the print cartridge.
Paper use
The all-in-one manual/automatic duplex features (two-sided printing) (see 
Print on both sides
(Windows)  for Windows and Printing on both sides (Macintosh) for Macintosh) and N-up printing
capability (multiple pages printed on one sheet) (see 
Printing multiple pages on one sheet of paper
for Windows and 
Printing multiple pages on one sheet of paper (Macintosh)  for Macintosh) can
reduce paper usage and the resulting demands on natural resources.
Plastics
Plastic parts over 25 grams are marked according to international standards that enhance the ability
to identify plastics for recycling purposes at the end of the all-in-ones life.
ENWW Environmental Product Stewardship program 383
 
						

							HP LaserJet printing supplies
Its easy to retrun and recycle your empty HP LaserJet print cartridges—free of charge—with HP
Planet Partners. HP is committed to providing  inventive, high-quality products and services that are
environmentally sound, from product design and manufacturing to distribution, operation, and
recycling processes. We ensure your returned HP LaserJet print cartridges are recycled properly,
processing them to recover valuable plastics and metals for new products and diverting millions of
tons of waste from landfills. Since this cartridge is being recycled and used in new materials, it will
not be returned to you. Your empty HP  LaserJet print cartridges are recycled responsibly when you
participate in the HP Planet Partners program.  Thank you for being environmentally responsible!
In many countries/regions, this products printing supplies (for example, the print cartridge, drum) can
be returned to HP through the HP Printing  Supplies Returns and Recycling Program. An easy-to-use
and free takeback program is available in more than 35 countries/regions. Multi-lingual program
information and instructions are included in every new HP LaserJet print cartridge and supplies
package.
HP Printing Supplies Returns and Recycling Program Information
Since 1992, HP has offered HP LaserJet supplies return and recycling free of charge. In 2004, HP
Planet Partners for LaserJet Supplies was available in 85% of the world \
market where HP LaserJet
supplies are sold. Postage-paid and pre-addressed labels are included within the instruction guide in
most HP LaserJet print cartridge boxes. Labels and bulk boxes are also available through the
website: 
http://www.hp.com/go/recycle
Use the label to return empty,  original HP LaserJet print cartridges only. Please do not use this label
for non-HP cartridges, refilled or remanufactured cartridges, or warranty returns. Printing supplies or
other objects inadvertently sent to the HP Planet Partners program cannot be returned.
More than 10 million HP LaserJet print cartridges were recycled globally in 2004 through the HP
Planet Partners supplies recycling program. This record number represents 26 million pounds of print
cartridge materials diverted from landfills. Worldwide, in 2004, HP recycled an average of 59% of the
print cartridge by weight consisting primarily of plastic and metals. Plastics and metals are used to
make new products such as HP products, plastic  trays and spools. The remaining materials are
disposed of in an environmentally responsible manner.
U.S. returns
For a more environmentally responsible return of used cartridges and supplies, HP encourages the
use of bulk returns. Simply bundle two or more cartridges together and use the single, pre-paid, pre-
addressed UPS label that is supplied in the package.  For more information in the U.S., call (1) (800)
(340-2445) or visit the HP website at 
http://www.hp.com/go/recycle .
Non-U.S. returns
Non-U.S. customers should visit the 
http://www.hp.com/go/recycle  Web site for further information
regarding availability of the HP Printing Supplies Returns and Recycling Program.
Paper
This all-in-one is capable of using recycled papers, when the paper meets the guidelines outlined in
the  HP LaserJet Printer Family Print Media Guide , which you can.view on the Web at 
www.hp.com/
support/ljpaperguide. This product is suitable for the use of recycled paper according to
EN12281:2002.
Material restrictions
384 Appendix D   Regulatory information ENWW
 
						

							This HP product contains mercury in the fluorescent lamp or scanner that may require special
handling at end-of-life.
This HP product contains a battery that might require special handling at end of life.
Type:Lithium Carbon Monofluoride (solid button cell)
Weight:approx. 1 gram
Location:on formatter PC board (one battery per product)
User Removable:No
Nederlands
Toepassing: De batterij wordt gebruikt als reserve-energiebron  voor de tijdklok (die wordt gebruikt
voor het faxgedeelte van het apparaat).
Locatie van de batterij: De batterij wordt bij  de fabricage/distributie van het product op de formatter
gesoldeerd.
Voorschriften:
● Richtlijn van de Europese Unie met betrekking tot batterijen: Deze batterij komt niet in
aanmerking voor de richtlijnen.
● Bijzondere bepaling A45 voor UN-standaard: Deze batterij is een niet-gevaarlijk artikel.
Levensduur: De batterij is ontworpen om minstens  even lang mee te gaan als het product.
Batterijfabrikanten: Rayovac, Madison, WI, USA; and Panasonic, Secaucus, NJ, USA.
Het ontwerp en de specificaties kunnen zonder kennisgeving worden gewijzigd.
Taiwan
For recycling information, you can contact http://www.hp.com/go/recycle  or contact your local
authorities or the Electronics Industry Alliance: 
http://www.eiae.org  .
ENWW Environmental Product Stewardship program 385
 
						

							Disposal of waste equipment by users in private household in the
European Union
This symbol on the product or on its packaging indicates that this product must not be disposed of
with your other household waste. Instead, it is  your responsibility to dispose of your waste equipment
by handing it over to a designated collection point  for the recycling of waste electrical and electronic
equipment. The separate collection and recycling of your waste equipment at the time of disposal will
help to conserve natural resources and ensure that it is recycled in a manner that protects human
health and the environment. For more information about where you can drop off your waste
equipment for recycling, please contact your local city office, your household waste disposal service
or the shop where you purchased the product.
Material safety data sheet
Material safety data sheets (MSDS) for supplies containing chemical substances (for example, toner)
can be obtained by visiting the HP Website at: 
www.hp.com/go/msds  or www.hp.com/hpinfo/
community/environment/productinfo/safety
For more information
Visit www.hp.com/go/environment  or www.hp.com/hpinfo/community/environment/productinfo/safety
for more information about the following environmental topics.
● Product environmental profile sheet for this and many related HP products
● Hewlett Packards commitment to the environment
● Hewlett Packards environmental management system
● Hewlett Packards end-of-life product return and recycling program
● MSDS
386 Appendix D   Regulatory information ENWW
 
						

							Telephone Consumer Protection Act (United States)
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer
or other electronic device, including fax machines, to send any message unless such message
clearly contains, in a margin at the top or bottom of each transmitted page or on the first page of the
transmission, the date and time it is sent and an identification of the business, other entity, or
individual sending the message and the telephone number of the sending machine or such business,
other entity, or individual. (The telephone number provided  cannot be a 900 number or any other
number for which charges exceed local or long-distance transmission charges.)
ENWW Telephone Consumer Protection Act (United States) 387
 
						

							IC CS-03 requirements
Notice: The Industry Canada label identifies certified equipment. This certification means the
equipment meets certain telecommunications network protective, operational, and safety
requirements as prescribed in the appropriate Terminal Equipment Technical Requirement document
(s). The Department does not guarantee the equipment  will operate to the user’s satisfaction. Before
installing this equipment, users should ensure that it is permissible for the equipment to be
connected to the facilities of the local  telecommunications company. The equipment must also be
installed using an acceptable method of connection. The customer should be aware that compliance
with the above conditions may not prevent degradation  of service in some situations. Repairs to
certified equipment should be coordinated by a representative designated\
 by the supplier. Any
repairs or alterations made by the user to  this equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user to disconnect the equipment. Users should
ensure for their own protection that the electrical ground connections of the power utility, telephone
lines, and internal metallic water pipe system, if  present, are connected together. This precaution can
be particularly important in rural areas.
CAUTION Users should not attempt to make such connections themselves, but should
contact the appropriate electric inspection authority, or electrician, as appropriate. The Ringer
Equivalence Number (REN) of this device is 0.7.
Notice:  The Ringer Equivalence Number (REN) assigned to each terminal device provides an
indication of the maximum number of terminals  allowed to be connected to a telephone interface.
The termination on an interface may consist of any combination of devices subject only to the
requirement that the sum of the Ringer Equivalence Number  of all the devices does not exceed five
(5.0). The standard connecting arrangement code (telephone jack type) for equipment with d\
irect
connections to the telephone network is CA11A.
388 Appendix D   Regulatory information ENWW
 
						

							EU statement for telecom operation
This product is intended to be connected to the analog Public Switched Telecommunication
Networks (PSTN) of European Economic Area (EEA) countries/regions. It meets requirements of EU
R&TTE Directive 1999/5/EC (Annex II) and carries appropriate CE conformity marking. For more
details, see Declaration of Conformity issued by the manufacturer in another section of this manual.
However, due to differences between individual national PSTNs, the product may not guarantee
unconditional assurance of successful operation on every PSTN termination point. Network
compatibility depends on the correct setting being selected  by the customer in preparation of its
connection to the PSTN. Please follow the instructions provided in the user manual. If you
experience network compatibility issues, please contact your equipment supplier or Hewlett-Packard
help desk in the country/region of operation. Connecting  to a PSTN termination point may be the
subject of additional requirements set out by the local PSTN operator.
New Zealand telecom statements
The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has
accepted that the item complies with minimum conditions for connection to its network. It indicates no
endorsement of the product by Telecom, nor does it  provide any sort of warranty. Above all, it
provides no assurance that any item will work correctly in all respects \
with another item of
Telepermitted equipment of a different make or model,  nor does it imply that any product is
compatible with all of Telecom’s network services.
This equipment may not provide for the effective hand-over of a call to another device connected to
the same line.
This equipment shall not be set up to make automatic calls to the Telecom “111” Emergency Service.\
This product has not been tested to ensure compatability with the FaxAbility distinctive ring service
for New Zealand.
ENWW EU statement for telecom operation 389
 
						

							Declaration of conformity (HP LaserJet 3390, 3392, 3055,
and 3050)
Declaration of Conformity
according to ISO/IEC Guide 22 and EN 45014
Manufacturers Name:Hewlett-Packard Company
Manufacturers Address: 11311 Chinden Boulevard,
Boise, Idaho 83714-1021, USA
declares, that the product
Product Names: HP LaserJet 3390, 3392, 3055, and 3050
Regulatory Model Number
3)BOISB-0402-03, BOISB-0405-03, and BOISB-0405-04
Toner Cartridges5)Q5949A, Q5949X, and Q2612A
Product Options: ALL
conforms to the following Product Specifications:
Safety: IEC 60950-1:2001 / EN60950-1: 2001  A11 IEC 60825-1:1993 + A1 +A2
EN 60825-1:1994 + A1 + A2 (Class 1 Laser/LED Product)
GB4943-2001
EMC: CISPR 22:1993+A1+A2 / EN 55022:1994+A1+A2 - Class B
1)
EN 61000-3-2:2000
EN 61000-3-3:1995+A1
EN 55024:1998+A1+A2
FCC Title 47 CFR, Part 15 Class B
2) / ICES-003, Issue 4
GB9254-1998, GB17625.1-1998
TELECOM TBR-21:1998; EG 201 121:1998; FCC Title 47 CFR, Part 68
4)
Supplementary Information:
The product herewith complies with the requirements of the EMC  Directive 89/336/EEC, the Low Voltage Directive 73/23/EEC, the R &TTE
Directive 1999/5/EC (Annex II), and carries the CE-Marking accordingly.
1) The product was tested in a typical configuration with Hewlett-Packa\
rd Personal Computer Systems.
2) This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) this device ma y not cause
harmful interference, and (2) this device must accept any  interference received, including interference that may cause undesire d operation.
3) For regulatory purposes, this product is assigned a Regulatory model  number. This number should not be confused with the marketing
name or the product number(s).
4) Telecom approvals and standards appropriate for the target countries/regions have been applied to this product, in addition  to those
listed above.
5) LaserJet 3050 and 3055 cartridge: Q2612A. LaserJet 3390 and  3392 cartridge: Q5949A yields (2500 standard page capacity), or
Q5949X (6000 standard page capacity) (declared capacity yield value according to ISO/IEC 19752.)
Boise, Idaho 83713, USA
August 1, 2005
For regulatory topics only:
Australia Contact: Product Regulations Manager, Hewlett-Packard Australia Ltd., 31-41 Joseph Street, Blackburn, Victoria 3130, Australia
European Contact: Your Local Hewlett-Packard Sales and Service  Office or Hewlett-Packard GmbH, Department HQ-TRE /
Standards Europe, Herrenberger Strasse 140, Böblingen, D-71034, Germany, (FAX: +49-7031-14-3143)
USA Contact: Product Regulations Manager, Hewlett-Packard Company, PO Box 15, Mail Stop 160, Boise, Idaho 83707-0015, USA, (Phone: 208-396-6000)
390 Appendix D   Regulatory information ENWW
 
						

							Declaration of conformity (HP LaserJet 3052)
Declaration of Conformity
according to ISO/IEC Guide 22 and EN 45014
Manufacturers Name:Hewlett-Packard Company
Manufacturers Address: 11311 Chinden Boulevard,
Boise, Idaho 83714-1021, USA
declares, that the product
Product Names: HP LaserJet 3052
Regulatory Model Number
3)BOISB-0405-02
Toner Cartridges Q2612A
Product Options: ALL
conforms to the following Product Specifications:
Safety: IEC 60950-1:2001 / EN60950-1: 2001  A11
IEC 60825-1:1993 + A1 +A2
EN 60825-1:1994 + A1 + A2 (Class 1 Laser/LED Product)
GB4943-2001
EMC: CISPR 22:1993+A1+A2 / EN 55022:1994+A1+A2 - Class B
1)
EN 61000-3-2:2000
EN 61000-3-3:1995+A1
EN 55024:1998+A1+A2
FCC Title 47 CFR, Part 15 Class B
2) / ICES-003, Issue 4
GB9254-1998, GB17625.1-1998
Supplementary Information:
The product herewith complies with the requirements of the EMC  Directive 89/336/EEC, the Low Voltage Directive 73/23/EEC, and c arries
the CE-Marking accordingly.
1) The product was tested in a typical configuration with Hewlett-Packard Perso\
nal Computer Systems.
2) This Device complies with Part 15 of the FCC Rules. Operation  is subject to the following two Conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesire d operation.
3) For regulatory purposes, this product is assigned a Regulatory model  number. This number should not be confused with the marketing
name or the product number(s).
Boise, Idaho 83713, USA
August 1, 2005
For regulatory topics only:
Australia Contact: Product Regulations Manager, Hewlett-Packard Australia Ltd., 31-41 Joseph Street, Blackburn, Victoria 3130, Australia
European Contact: Your Local Hewlett-Packard Sales and Service  Office or Hewlett-Packard GmbH, Department HQ-TRE /
Standards Europe, Herrenberger Strasse 140, Böblingen, D-71034, Germany, (FAX: +49-7031-14-3143)
USA Contact: Product Regulations Manager, Hewlett-Packard Company,, PO Box 15, Mail Stop 160, Boise, Idaho 83707-0015, USA, (Phone: 208-396-6000)
ENWW Declaration of conformity (HP LaserJet 3052) 391
 
						

							Country-/region-specific safety statements
Laser safety statement
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration
has implemented regulations for laser products manufactured since August 1, 1976. Compliance is
mandatory for products marketed in the United States. The printer is certified as a Class 1 laser
product under the U.S. Department of Health and Human Services (DHHS) Radiation Performance
Standard according to the Radiation Control for Health and Safety Act of 1968.
Since radiation emitted inside the printer is completely confined within protective housings and
external covers, the laser beam cannot escape  during any phase of normal user operation.
WARNING!Using controls, making adjustments, or performing procedures other than those
specified in this user guide may result in exposure to hazardous radiation.
Canadian DOC statement
Complies with Canadian EMC Class B requirements.
«Conforme àla classe B des normes canadiennes de compatibilité électromagnétiques (CEM).»
Korean EMI statement
392 Appendix D   Regulatory information ENWW