HP LaserJet 3015 User Manual

4. Use the < or the > button to select the option for how you normally want to reduce or
enlarge copies. You can select:
●Original=100%
●Lgl > Ltr=78%
●Lgl > A4=83%
●A4 > Ltr=94%
●Ltr > A4=97%
●Full Page=91%
●2 pages/sheet
●4 pages/sheet
●Custom: 25-400%
If you select Custom: 25-400%, type in the percentage of the original size that you
normally want for copies.
If you select 2 pages/sheet or 4 pages/sheet, select the orientation (portrait or
landscape).
5. Press 
MENU/ENTER to save your selection.
ENWW...

Changing the default copy-collation setting
You can set the device to automatically collate multiple copies into sets. For example, if you
are making two copies of three pages and the automatic collation is on, the pages print in this
order: 1,2,3,1,2,3. If automatic collation is off, the pages print in this order: 1,1,2,2,3,3.
To use the automatic collation, the original document must fit into the memory. If it does not,
the device makes only one copy and a message appears notifying you of the change....

Changing the default number of copies
You can choose to have the default number of copies be any number from 1 to 99.
To change the default number of copies
1. On the device control panel, press MENU/ENTER.
2. Use the < or the > button to select Copy setup, and then press 
MENU/ENTER.
3. Use the < or the > button to select Def. # of copies, and then press 
MENU/ENTER.
4. Use the alphanumeric buttons to type the number of copies (between 1 and 99) that you
want as the default.
5. Press 
MENU/ENTER to save...

Copying two-sided originals
To copy a multiple-page stack of two-sided originals
1. Load the stack of originals to be copied into the automatic document feeder (ADF) input
tray with the first page facing down, and with the top of the page leading into the ADF.
2. Press START/COPY. The odd-numbered pages are copied and printed.
3. Remove the stack from the ADF output tray and reload the stack with the last page facing
down, and with the top of the page leading into the ADF.
4. Press START/COPY. The...

5
Scanning
Use the following instructions to perform scanning tasks:
●
Loading originals to scan
●
Understanding scanning methods
●
Canceling a scan job
●
Scanning from the device control panel
●
Scanning by using hp LaserJet Scan software
●
Scanning by using TWAIN-compliant and WIA-compliant software
●
Scanning by using OCR
●
Scanner resolution and color
ENWW55
 

Loading originals to scan
Use these instructions to load originals into the device for scanning. See Selecting media for
the automatic document feeder (ADF) for information about choosing original documents for
scanning.
Loading originals into the automatic document feeder (ADF)
input tray
NoteAutomatic document feeder (ADF) capacity is up to 30 sheets of 75 g/m2 (20 lb) media
(depending on the thickness of the media), or until the ADF input tray is full.
The minimum size for media in the ADF input tray...

CAUTIONTo prevent damaging the device, do not use an original that has correction fluid, correction
tape, or staples.
If you moved the ADF media lever to the right in step 1, move it back to the left when you have
finished printing. Printing on regular media with the ADF media lever moved to the right can
cause jams.
ENWWLoading originals to scan57
 

Understanding scanning methods
You can scan an item in the following ways.
●Scan from the device: Start scanning directly from the device by using the device
control panel scan buttons. The 
SCAN TO button can be programmed to scan to e-mail or to
scan to a folder. For more information, see 
Scanning from the device control panel.
●Scan from hp LaserJet Scan software: Press 
START SCAN on the device control panel to
start the HP LaserJet Scan program. Pressing 
START SCAN to start the HP LaserJet Scan...

Canceling a scan job
To cancel a scan job, use one of the following procedures.
●Press 
CANCEL on the device control panel.
●Click the Cancel button in the onscreen dialog box.
If you cancel a scan job, remove the original document from the automatic document feeder
(ADF) input tray.
ENWWCanceling a scan job59
 

Scanning from the device control panel
Use the following instructions to scan directly from the device control panel.
Note
The computer that is connected to the device must be turned on.
Programming the Scan to button
To program the device SCAN TO button, you must gain access to the device settings. Go to the
Scan section of the HP toolbox and click the Scan to... tab. For more information, see the HP
toolbox Help.
Scanning to e-mail
To scan to e-mail by using the SCAN TO button on the device control...