HP LaserJet 3015 User Manual

8. Place the pages from side one in the input tray again. Side one should be facing down
with the bottom edge feeding into the device first.
9. Click OK (on the computer screen), and wait for side two to print.
10. Fold and staple the pages.
ENWWPrinting booklets41
 

Printing watermarks
You can use the watermark option to print text “underneath” (in the background) of an existing
document. For example, you might want to have large gray letters that spell Draft or
Confidential printed diagonally across the first page or all of the pages of a document.
To use the watermark feature
1. In the software program, open the device properties (printer driver). See Changing print
settings for instructions.
2. On the Effects tab, use the drop-down list to select the watermark...

4
Copying
Use these instructions to perform copying tasks with your device:
●
Loading originals to copy
●
Starting a copy job
●
Canceling a copy job
●
Adjusting the copy quality
●
Adjusting the lighter/darker (contrast) setting
●
Reducing or enlarging copies
●
Changing the default copy-collation setting
●
Changing the default number of copies
●
Copying two-sided originals
Note
Many of the functions that are described in this chapter also can be performed by using the HP
toolbox. For instructions about...

Loading originals to copy
Use these instructions to load originals into your device for copying. See Selecting media for
the automatic document feeder (ADF) for information about choosing original documents for
copying.
To load originals into the automatic document feeder (ADF)
input tray
NoteADF capacity is up to 30 sheets of 75 g/m2 (20 lb) media (depending on the thickness of the
media), or until the ADF input tray is full.
The minimum size for media in the ADF is 74 by 105 mm ( (2.9 by 4.1 inches))....

4.
Adjust the media guides until they are snug against the media.
5. The document is now ready to be copied.
CAUTION
To prevent damaging the device, do not use an original that contains correction tape,
correction fluid, or staples.
If you moved the ADF media lever to the right in step 1, move it back to the left when you have
finished printing. Printing on regular media with the ADF media lever moved to the right can
cause jams.
ENWWLoading originals to copy45
 

Starting a copy job
To make copies with your device, use the following instructions.
1. Load your original document face-down into the automatic document feeder (ADF) input
tray.
2. Press 
START/COPY on the device control panel to start copying.
3. Repeat the process for each copy.
For more detailed instructions about loading originals into the ADF input tray, see 
Loading
originals to copy.
Canceling a copy job
To cancel a copy job, press CANCEL on the device control panel. If more than one process is...

Adjusting the copy quality
The factory-set default for copy quality is Text. This setting is the best for items that contain
mostly text.
When making a copy of a photo or graphic, you can select the Photo setting to increase the
quality of your copy, or select the Best Photo setting for the highest photo quality.
If you want to conserve toner, and the copy quality is not as important, select Draft.
To adjust the copy quality for the current job
1. On the device control panel, press QUALITY to see the...

Adjusting the lighter/darker (contrast) setting
The lighter/darker setting affects the lightness or darkness (contrast) of the copy. Use the
following procedure to change the contrast for the current copy job only.
To adjust the lighter/darker setting for the current job
1. On the device control panel, press LIGHTER/DARKER to see the current contrast setting.
2. Use the < or the > button to adjust the setting. Move the slider to the left to make the copy
lighter than the original, or move the slider to...

Reducing or enlarging copies
The device can reduce copies to as little as 25 percent of the original or enlarge copies to as
much as 400 percent of the original. It can also make the following reductions or enlargements
automatically:
Note
You must change the default paper size in the media input tray to match the output size, or
part of your copy might be cut off. For instructions, see 
Changing the default media size.
●Original=100%
●Lgl > Ltr=78%
●Lgl > A4=83%
●A4 > Ltr=94%
●Ltr > A4=97%
●Full...

To reduce or enlarge copies for the current job
To reduce or enlarge copies for the current job only, use the following instructions.
1. On the device control panel, press 
REDUCE/ENLARGE.
2. Select the size to which you would like to reduce or enlarge the copies in this job. You can
select:
●Original=100%
●Lgl > Ltr=78%
●Lgl > A4=83%
●A4 > Ltr=94%
●Ltr > A4=97%
●Full Page=91%
●2 pages/sheet
●4 pages/sheet
●Custom: 25-400%
If you select Custom: 25-400%, type a percentage by using the alphanumeric...