HP LaserJet 3015 User Manual

To print on multiple envelopes
Use only envelopes that are recommended for laser printers. See Device media specifications
for more information.
Note
Use the priority input slot for printing on one envelope. Use the media input tray for printing on
multiple envelopes.
1. Open the media input tray and remove any media.
2. Before loading the envelopes, slide the media guides outward so that they are slightly
wider than the envelopes.
3. If the envelopes have a flap that folds along the long edge, place the...

5. On the Paper tab or the Paper/Quality tab in the printer driver, select Envelope from the
Type is: drop-down list.
Note
Not all device features are available for all printer drivers or operating systems. See the device
properties (driver) online Help for information about the available features for the driver.
6. Print on the envelopes.
32Chapter 3 PrintingENWW
 

Printing on transparencies and labels
Use only transparencies and labels that are recommended for use in laser printers, such as
HP transparency film and HP laser-quality labels. See 
Device media specifications for more
information.
CAUTION
Inspect the media to make sure that it is not wrinkled or curled and that it does not have any
torn edges or missing labels. Do not send the labels through the device more than once. The
adhesive can damage the device.
To print on transparencies or labels
CAUTIONBe...

3. On the Paper tab or the Paper/Quality tab in the printer driver, select the correct media
type from the Type is: drop-down list.
Note
Not all device features are available for all printer drivers or operating systems. See the device
properties (driver) online Help for information about the available features for the driver.
4. Print the document. Remove the media from the output bin as it exits to prevent it from
sticking together, and place the printed pages on a flat surface.
34Chapter 3 PrintingENWW
 

Printing on letterhead and preprinted forms
Only use letterhead or preprinted forms that are recommended for use in laser printers, such
as HP laser-quality letterhead and preprinted forms. See 
Device media specifications for more
information.
Use these instructions to print documents on letterhead or preprinted forms.
To print on letterhead and preprinted forms
1. Load the print media with the top forward and the side to be printed on facing up.
2. Adjust the media guides to fit the width of the print...

Printing on custom-sized media or card stock
The device can print on custom-sized media and card stock that is between 76 by 127 mm (3
by 5 inches) and 216 by 356 mm (8.5 by 14 inches) in size. Depending on the media, you can
print up to 10 sheets from the priority input slot. Use the media input tray for more than 10
sheets.
Note
Make sure that the sheets are not stuck together before you load them.
To print on custom-sized media or card stock
1. Load the media with the narrow side forward and the side...

Printing on both sides of the media (manual duplexing)
To print on both sides of the media (manual duplexing), you must send the media through the
device twice.
Manual duplexing can cause the device to become dirty, which reduces print quality. If the
device becomes dirty, see 
Cleaning and maintenance for instructions.
To manually duplex
NoteThe printer driver also contains instructions and graphics for manually duplexing.
1. In the software program, open the device properties (printer driver). For...

6. Place the stack of media in the input tray again. Side one should be facing down with the
top edge feeding into the device first.
7. Click OK (on the computer screen), and then wait for side two to print.
38Chapter 3 PrintingENWW
 

Printing multiple pages on a single sheet of media
You can select the number of pages that you want to print on a single sheet of media. If you
choose to print more than one page per sheet, the pages appear smaller and are arranged on
the sheet in the order that they would otherwise be printed. You can specify up to 16 pages
per sheet of media.
To print multiple pages on a single sheet
1. In the software program, open the device properties (printer driver). See Changing print
settings for instructions....

Printing booklets
You can print booklets on letter, legal, or A4 print media.
To print booklets
1. Load the print media in the media input tray.
2. In the software program, open the device properties (printer driver). For instructions, see
To change settings for a print job.
3. On the Finishing tab, select Print on Both Sides.
Note
If the Print on Both Sides option is dimmed or unavailable, open the device properties
(printer driver). For instructions, see 
To change default settings across all programs....