GTE Omni Si Database Technical Practices Manual

TL-130400-1001Table 16.10Entry Fields for Record Code RA (Continued)000-l 27 = trunkIdentify the trunk used in support of alternate
recorder announcer 
#2.
- = not selecteder announcer 
#3 is used, enter 0.
order announcer is used for the night
Announcer 
#3Announcer 
#lN = not selected
-A trunk must be answered before anRA
message can be heard (a 
ringdown central
to an RA without answer supervision being
returned.
33Return AnswerY = return answerEnter Y if alternate RA 
#l has message return
on...

TL-130400-1001Record Code SD:16.11 Record Code SD, Figure 16.11, defines the secondary
CAS Secondarydirectory numbers of a branch that are directed to the primary
Directory Numbersdirectory numbers of that branch. All secondary directory
numbers must be unique and cannot be a primary directory
number or a pilot number of a station hunt group.
CAS SECONDARY DIRECTORY NUMBERSI
I
I
T-------T-------7-------T-------;I4IIII
II5I6I7I
IIII
I
III
I
IIII
III
II
IIIIIIII
I
I
II
I
tIIIIII
I
IIIII
III
IIIIIIII
II...

TL-130400-1001COL.NO.
Table 16.11Entry Fields for Record Code SD
COL.VALID
NAME
ENTRIESCOMMENTS
12-15
. . . .Primary
Directory
Numbers
s-
0000-9999 =numberAssign the primary directory number of a line
that is to have secondary directory numbers.
-The primary directory number must have an
n-displayable class of service with SD (CAS
secondary number) specified.
-This number must be a valid directory
number appearing on Record Code LD.
16-55CAS Secondary 0000-9999 =This field determines the CAS Branch...

TL-130400-1001
THIS PAGE IS INTENTIONALLY LEFT BLANK.D-3288187SVR 5210 

SVR 5210PD-20017.0 This section describes the record codes required to
PACKET DATAdefine the various system packet data features. The following
record codes are required:
l Record Code RT defines the data system routing patterns.
l Record Code CP defines additional call routing information.
l Record Code AP defines the system’s 
APMs (Asynchronous
Packet Managers).
e Record Code AQ defines port parameters that can be modifiec’by another device.
o Record Code XP defines the system’s SPMs (Synchronous...

TL-130400-I 001Record Code RT:
Data System17.1 Record Code RT, Figure 17.1 defines the system
Routingnumbering plan by groups according to the type of usage. Since
each server number represents one type of usage, one entry is
required per server number. The sub-port field (columns 29-
30) must be dashed for both asynchronous 
a.rld synchronous
(X.25) groups. Primary and secondary destination fields
(columns 33-42) are only used if the usage type defined in
columns 15-16 is 01 or 02. The primary and...

T-L-1 30400-l 001Table 17.1Entry Fields for Record Code RTCOMMENTS
them.This field is generally set to 5 for
asynchronous devices. The types are:
00= X.25 single line. The device routed to is
an X.25 SPM, and only one device can
receive calls to this address.
01 = X.25 load share. Two 
SPMs can receive
calls to this address, and the one with the
most current LCN (Logical Channel Number)
capacity receives the call. This feature is
often used to double the LCN capacity into a
single X.25 host or to provide...

TL-130400-1001COL.
NO.
Table 17.1Entry Fields for Record Code RT (Continued)
COL.VALID
NAMEENTRIESCOMMENTS
15-16Usage0006 = asynchronous, random-ordered non-cont’d
01rotary groups. Asynchronous devices are__02addressed directly by sub-address 01-89,
03but the actual order in which the group is built
04depends only on the order in which the
05devices are loaded and initialized. Unlike the
06direct-ordered variety, these groups can
:;have any sub-address (from 01 
- 89) no
matter what the group size....

TL-130400-1001
Table 17.aEntry Fields for3ecord Code RT (Continued)
L
COL.NO.COL.NAMEVALID
ENTRIESCOMMENTS
31-32Maximum Size
of This Rotary01-89 = numberIdentify the number of asynchronous devices
that make up this rotary group.
-Thisis the number of ports actually defined
for this group of devices.
-The field must be less than or equal to the
Maximum Number To Configure field.
-This field applies only if columns 15-16 are
marked 05 or 07.
-If columns 15-l 6 are marked 00, 01, 02,
03, 04, or 06, this...

TL-I 30400-l 001
Record Code CP:17.2 Record Code CP, Figure 17.2, defines the parameters for
Data Systemthe common asynchronous and synchronous (X.25) port
Common Portattributes. The parameters required by the data system ADMP
processor are also defined. The X.121 address is used for data
call setup and verification.The system requires an entry in this
record code for each of the following:
IIINIDIElXl
r----^----r---------~---------------------------~------------------------------I
I
II
zTTI
ii
I
III
I...